SrcSelectRule5_TempAddr.seq - Source Address Selection
check Rule 5(Prefer outgoing interface) with temporary address
Rule 5: Prefer outgoing interface.
If SA is assigned to the interface that will be used to send to D
and SB is assigned to a different interface, then prefer SA.
Source addresses used for this test are "temporary address" and "public address".
Host
None
This TEST performs the following Check procedures for
every address group defined by Check 01 - *.
*Check procedure
1. Initialize :
1.1. Set IPv6 Default Route in NUT
(Default Router address = <TN-Link0-LinkLocalAddress>)
1.2. Set privacy extention setting in NUT
1.3. Add Candidate Source Addresses (temporary / public ) in NUT
* temporary address is added by RA (TN->NUT)
1.4. Check Candidate Source Addresses by Ping6 (TN->NUT)
2. Send Ping6 from NUT to Destination
2.1. NUT send ICMPv6 echo request (NUT->TN)
3. Judgment :
if (recive packet's Destination & Source Addresses)
= (expected Destination & Source Addresses), Check pass
4. Cleanup :
4.1. Delete Candidate Source Addresses in NUT
4.2. Clear prefix list & NCE & default router list in NUT
4.3. Remove privacy extention setting in NUT
NUT TN Default Router Destination
| | | |
======(INITIALIZE)=========
| | | |
|<-<-<-+ | | Set IPv6 Default Route
|<-<-<-+ | | Set privacy extention setting
|<-<-<-+ | | Add Candidate Source Addresses (Link0)
|<-<-<-+ | | Add Candidate Source Addresses (Link1)
| | | |
|<------------+ | RA (Link0)
| | | |
|<------------+ | Echo Request to Candidate Source Addresses 1 (Liunk0)
+------------>| | Echo Reply (Liunk0)
| | | |
|<------------+ | Echo Request to Candidate Source Addresses 2 (Liunk0)
+------------>| | Echo Reply (Liunk0)
| | | |
|<------------+ | Echo Request to Candidate Source Addresses (Liunk1)
+------------>| | Echo Reply (Liunk1)
| | | |
======(INITIALIZE)=========
| | | |
|<-<-<-+ | | Excute ping6 command
| | | |
+------------------------>| Echo Request (Liunk0)
| | | |
LLA(Link Local Address)
* default route face to Link0
*Following address grouup does not match Rule 1-4
Check 01:
Destination: 3fff::2
Candidate Source Addresses: 3ffd::random(temporary)(Link0) or 3ffe::1(Link1) or fec0::1(Link0) or LLA(Link0)
Result: 3ffe::random(temporary)(Link0)
Check 02:
Destination: ff0e::2
Candidate Source Addresses: 3ffd::random(temporary)(Link0) or 3ffe::1(Link1) or fec0::1(Link0) or LLA(Link0)
Result: 3ffe::random(temporary)(Link0)
Check 03:
Destination: ff08::2
Candidate Source Addresses: 3ffd::random(temporary)(Link0) or 3ffe::1(Link1) or fec0::1(Link0) or LLA(Link0)
Result: 3ffe::random(temporary)(Link0)
Check 04:
Destination: fec0::2
Candidate Source Addresses: 3ffd::random(temporary)(Link0) or 3ffe::1(Link1) or LLA(Link0)
Result: 3ffe::random(temporary)(Link0)
Check 05:
Destination: ff05::2
Candidate Source Addresses: 3ffd::random(temporary)(Link0) or 3ffe::1(Link1) or LLA(Link0)
Result: 3ffe::random(temporary)(Link0)
Check 01:
PASS: Receive Echo Request & source address != 3ffe::1 and fec0::1 and LLA
Check 02:
PASS: Receive Echo Request & source address != 3ffe::1 and fec0::1 and LLA
Check 03:
PASS: Receive Echo Request & source address != 3ffe::1 and fec0::1 and LLA
Check 04:
PASS: Receive Echo Request & source address != 3ffe::1 and LLA
Check 05:
PASS: Receive Echo Request & source address != 3ffe::1 and LLA
TEST
PASS: All Check = PASS
perldoc V6evalTool
ADDR_SELECT.html "Default Address Selection for IPv6" Test Common Utility
das_rules.html "Default Address Selection for IPv6" Rules