NAME

  SrcSelectRule7.seq - Source Address Selection
                       check Rule 7(Prefer public addresses)

  Rule 7: Prefer public addresses. 
    If SA is a public address and SB is a temporary address, then prefer SA.

  Source addresses used for this test are "temporary address" and "public address".

TARGET

  Host

INITIALIZATION

  None

TEST PROCEDURE

  This TEST performs the following Check procedures for
  every address group defined by Check 01 - *.
    
  *Check procedure
  
  1. Initialize :
     1.1. Set IPv6 Default Route in NUT
          (Default Router address = <TN-Link0-LinkLocalAddress>)
     1.2. Set privacy extention setting in NUT
     1.3. Add Candidate Source Addresses (temporary / public ) in NUT
          * temporary address is added by RA (TN->NUT)
     1.4. Check Candidate Source Addresses by Ping6 (TN->NUT)
  2. Send Ping6 from NUT to Destination
     2.1. NUT send ICMPv6 echo request (NUT->TN)
  3. Judgment :
     if (recive packet's Destination & Source Addresses)
     = (expected Destination & Source Addresses), Check pass
  4. Cleanup :
     4.1. Delete Candidate Source Addresses in NUT
     4.2. Clear prefix list & NCE & default router list in NUT
     4.3. Remove privacy extention setting in NUT

        NUT    TN  Default Router  Destination
         |      |      |           |
         ======(INITIALIZE)=========
         |      |      |           |
         |<-<-<-+      |           | Set IPv6 Default Route
         |<-<-<-+      |           | Set privacy extention setting
         |<-<-<-+      |           | Add Candidate Source Addresses
         |      |      |           |
         |<------------+           | RA
         |      |      |           |
         |<------------+           | Echo Request to Candidate Source Addresses 1
         +------------>|           | Echo Reply
         |      |      |           |
         |<------------+           | Echo Request to Candidate Source Addresses 2
         +------------>|           | Echo Reply
         |      |      |           |
         |<------------+           | Echo Request to Candidate Source Addresses 3
         +------------>|           | Echo Reply
         |      |      |           |
         ======(INITIALIZE)=========
         |      |      |           |
         |<-<-<-+      |           | Excute ping6 command
         |      |      |           |
         +------------------------>| Echo Request
         |      |      |           |

  LLA(Link Local Address)

  *Following address grouup does not match Rule 1-6

  Check 01:
    Destination: 3fff::2
    Candidate Source Addresses: 3ffe::1 or 3fff::random(temporary) or fec0::1 or LLA
    Result: 3ffe::1

  Check 02:
    Destination: ff0e::2
    Candidate Source Addresses: 3ffe::1 or 3fff::random(temporary) or fec0::1 or LLA
    Result: 3ffe::1

  Check 03:
    Destination: 3fff::2
    Candidate Source Addresses: fec0::1 or fec0::random(temporary) or LLA
    Result: 3ffe::1

  Check 04:
    Destination: ff0e::2
    Candidate Source Addresses: fec0::1 or fec0::random(temporary) or LLA
    Result: 3ffe::1

  Check 05:
    Destination: ff08::2
    Candidate Source Addresses: 3ffe::1 or 3fff::random(temporary) or fec0::1 or LLA
    Result: 3ffe::1

  Check 06:
    Destination: ff08::2
    Candidate Source Addresses: fec0::1 or fec0::random(temporary) or LLA
    Result: 3ffe::1

  Check 07:
    Destination: fec0::2
    Candidate Source Addresses: 3ffe::1 or 3fff::random(temporary) or LLA
    Result: 3ffe::1

  Check 08:
    Destination: ff05::2
    Candidate Source Addresses: 3ffe::1 or 3fff::random(temporary) or LLA
    Result: 3ffe::1

  Check 09:
    Destination: fec0::2
    Candidate Source Addresses: fec0::1 or fec0::random(temporary) or 3ffe::1 or LLA
    Result: 3ffe::1

  Check 10:
    Destination: ff05::2
    Candidate Source Addresses: fec0::1 or fec0::random(temporary) or 3ffe::1 or LLA
    Result: 3ffe::1

JUDGEMENT

  Check 01:
    PASS: Receive Echo Request & source address = 3ffe::1

  Check 02:
    PASS: Receive Echo Request & source address = 3ffe::1

  Check 03:
    PASS: Receive Echo Request & source address = fec0::1

  Check 04:
    PASS: Receive Echo Request & source address = fec0::1

  Check 05:
    PASS: Receive Echo Request & source address = 3ffe::1

  Check 06:
    PASS: Receive Echo Request & source address = fec0::1

  Check 07:
    PASS: Receive Echo Request & source address = 3ffe::1

  Check 08:
    PASS: Receive Echo Request & source address = 3ffe::1

  Check 09:
    PASS: Receive Echo Request & source address = fec0::1

  Check 10:
    PASS: Receive Echo Request & source address = fec0::1

  TEST
    PASS: All Check = PASS

SEE ALSO

  perldoc V6evalTool