| No. | Title |
|---|---|
| Initialize | |
| 1 | Initialization |
| Source Address Selection | |
| 2 | Rule1[Prefer same address] |
| 3 | Rule2[Prefer appropriate scope] |
| 4 | Rule5[Prefer outgoing interface] |
| 5 | Rule6[Prefer matching label] |
| 6 | Rule8[Use longest matching prefix] |
| Source Address Selection Examples in RFC | |
| 7 | Example 1 - 4[Prefer appropriate scope] |
| 8 | Example 7[longest-matching-prefix] |
| Destination Address Selection | |
| 9 | Rule2[Prefer matching scope] |
| 10 | Rule5[Prefer matching label] |
| 11 | Rule6[Prefer higher precedence] |
| 12 | Rule8[Prefer smaller scope] |
| 13 | Rule9[Use longest matching prefix] |
| 14 | Rule10[Otherwise, leave the order unchanged] |
| Destination Address Selection Examples in RFC | |
| 15 | Example 4[Prefer smaller scope] |
| 16 | Example 7[Use longest matching prefix] |
| 17 | Example 8[Prefer matching label] |
| 18 | Example 9[Prefer higher precedence] |
| Destination Address Selection with configure tunnel | |
| 19 | Rule7[Prefer native transport] |
| Termination | |
| 20 | Termination |