Date: Tue, 27 Dec 2005 15:16:29 +0900
From: "zhang" <zhang@64translator.com>
Subject: [dhcptest:00063] C_RFC3315_18_1_8_RecvReplyUseNewAddr.seq
To: "amit_agarr" <amit_agarr@yahoo.co.in>
Cc: "dhcptest" <dhcptest@tahi.org>
Message-Id: <200512270616.jBR6GUmn038807@bahamas.64translator.com>
X-Mail-Count: 00063

Hi, Amit,

  Thank you for your report.

  I have checked the log that you sent to me.

  From the log, It seems that your DHCPv6 program doesnot support the function of two IPv6 addresses in one IANA option.
  The program only accepts one IAAddress Option in IANA option and ignores the other IAAddress Option.

  The test process is as follows.
  
  NUT       TN
    |           |		
	|  ----> | Solicit
    |  <---- | Advertise
    |  ----> | Request
    |  <---- | Reply (assign one IPv6 address in one IANA option)
    |  ----> | Renew
    |  <---- | Reply (assign two IPv6 addresses in one IANA option)
    |  <---- | ping the two addresses
    |           |

   If you have the command in your console which is like ifconfig in Linux, you can use it to see whether the eth0 interface have been assigned two IPv6 addresses.

   Best regards.

   zhang
  

----------------------------------------------------
Hi Zhang,

Thanks Zhang for your immediate responses, its really helping me out.

I have one more problem, in the following script
C_RFC3315_18_1_8_RecvReplyUseNewAddr.seq

Here the client sends a request for a single IP addr and even assigns the same IP address 3ffe:501:ffff:100::abcd. The client also sends the renew message for the same address, but as a reply to this renew message the script sends two IP addresses 3ffe:501:ffff:100::abcd and 3ffe:501:ffff:100::6666. And then performs the echo request on both the address, as the second address sent is not assgined by the client, it wont get the echo reply and it fails....

I am attaching the log, plz check and tell me whats the problem.

Regards,
Amit



Best regards, 
  
zhang
zhang@64translator.com
2005-12-27