I tried installing some of the patches sent to the distribution list
(installed in order, Server_Relay.zip, PD.zip, patch.zip) but now the
tests don't work (they send the packets to the server but fail to
receive anything). See the log below.
If I don't use patch.zip, at least the initial tests do work. So,
perhaps something is wrong with the latest patch kit?
- Bernie
========== TEST 2 ==========
./S_RFC3315_5.1_UDPPorts.seq -pkt ./S_RFC3315_5.1_UDPPorts.def -log
2.html -ti "
UDP Port"
==== NUT Initialization ====
vRemote("dhcp6s.rmt",
"start","rapidcommit","link0=eth0","startaddr=3ffe:ffff:10
0::10","endaddr=3ffe:ffff:100::11")
dhcp6s> Set parameters of DHCPv6 Server manually as following:
dhcp6s> The interfaces used for DHCPv6 Server test is eth0.
dhcp6s> The start address:3ffe:ffff:100::10.
dhcp6s> The end address:3ffe:ffff:100::11.
dhcp6s> The Server is rapidcommit enabled.
dhcp6s>
dhcp6s> Please start the DHCPv6 Server!
dhcp6s> Then press the Enter.
Start Capturing Packets (Link0)
Clear Captured Packets (Link0)
==== Solicit/Reply Message Exchange ====
Send DHCPv6 Solicit Message: CLIENT1 --> all DHCPv6 Servers
Solicit Message
DHCPv6 OptionValues
IdentifierIdentifier = 100
Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
DUID-LLT MAC = 00:00:00:00:a2:a2
DUID-LLT TIME = 300000
Opt_DHCPv6_RapidCommit*
specified ns_nut_to_relay2_0 not found
specified ns_nut_to_relay1_0 not found
Could not get Reply Message
NUT did not send Reply Message.
NG
DHCPv6 Server stop
dhcp6s> Please stop the DHCPv6 Server!
dhcp6s> Then press the Enter.
Stop Capturing Packets (Link0)
Stop Link0
-> FAIL
========== TEST 3 ==========
./S_RFC3315_6_ServerMsgFormat.seq -pkt ./S_RFC3315_6_ServerMsgFormat.def
-log 3.
html -ti "Server/Client Message Format"
==== NUT Initialization ====
vRemote("dhcp6s.rmt",
"start","rapidcommit","link0=eth0","startaddr=3ffe:ffff:10
0::10","endaddr=3ffe:ffff:100::11")
dhcp6s> Set parameters of DHCPv6 Server manually as following:
dhcp6s> The interfaces used for DHCPv6 Server test is eth0.
dhcp6s> The start address:3ffe:ffff:100::10.
dhcp6s> The end address:3ffe:ffff:100::11.
dhcp6s> The Server is rapidcommit enabled.
dhcp6s>
dhcp6s> Please start the DHCPv6 Server!
dhcp6s> Then press the Enter.
Start Capturing Packets (Link0)
Clear Captured Packets (Link0)
==== Solicit Reply Message Exchange ====
Send DHCPv6 Solicit Message: CLIENT1 --> all DHCPv6 Servers
Solicit Message
DHCPv6 OptionValues
IdentifierIdentifier = 100
Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
DUID-LLT MAC = 00:00:00:00:a2:a2
DUID-LLT TIME = 300000
Opt_DHCPv6_RapidCommit*
specified ns_nut_to_relay2_0 not found
specified ns_nut_to_relay1_0 not found
Could not get Reply Message
NG: NUT did not send Reply Message.
DHCPv6 Server stop
dhcp6s> Please stop the DHCPv6 Server!
dhcp6s> Then press the Enter.