Hi:
Have you had a chance to look into why the patch.zip file didn't work
for me:
> specified ns_nut_to_relay2_0 not found
> specified ns_nut_to_relay1_0 not found
- Bernie
> -----Original Message-----
> From: Bernie Volz (volz)
> Sent: Friday, December 30, 2005 7:50 PM
> To: dhcptest@tahi.org
> Subject: [dhcptest:00091] Re: Minor test feedback
>
> I tried installing some of the patches sent to the distribution list
> (installed in order, Server_Relay.zip, PD.zip, patch.zip) but now the
> tests don't work (they send the packets to the server but fail to
> receive anything). See the log below.
>
> If I don't use patch.zip, at least the initial tests do work. So,
> perhaps something is wrong with the latest patch kit?
>
> - Bernie
>
> ========== TEST 2 ==========
> ./S_RFC3315_5.1_UDPPorts.seq -pkt ./S_RFC3315_5.1_UDPPorts.def -log
> 2.html -ti "
> UDP Port"
> ==== NUT Initialization ====
> vRemote("dhcp6s.rmt",
> "start","rapidcommit","link0=eth0","startaddr=3ffe:ffff:10
> 0::10","endaddr=3ffe:ffff:100::11")
>
> dhcp6s> Set parameters of DHCPv6 Server manually as following:
>
> dhcp6s> The interfaces used for DHCPv6 Server test is eth0.
> dhcp6s> The start address:3ffe:ffff:100::10.
> dhcp6s> The end address:3ffe:ffff:100::11.
> dhcp6s> The Server is rapidcommit enabled.
> dhcp6s>
>
> dhcp6s> Please start the DHCPv6 Server!
> dhcp6s> Then press the Enter.
>
> Start Capturing Packets (Link0)
> Clear Captured Packets (Link0)
> ==== Solicit/Reply Message Exchange ====
> Send DHCPv6 Solicit Message: CLIENT1 --> all DHCPv6 Servers
> Solicit Message
>
> DHCPv6 OptionValues
> IdentifierIdentifier = 100
> Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
> DUID-LLT MAC = 00:00:00:00:a2:a2
> DUID-LLT TIME = 300000
> Opt_DHCPv6_RapidCommit*
>
> specified ns_nut_to_relay2_0 not found
> specified ns_nut_to_relay1_0 not found
> Could not get Reply Message
> NUT did not send Reply Message.
> NG
> DHCPv6 Server stop
>
> dhcp6s> Please stop the DHCPv6 Server!
> dhcp6s> Then press the Enter.
>
> Stop Capturing Packets (Link0)
> Stop Link0
> -> FAIL
> ========== TEST 3 ==========
> ./S_RFC3315_6_ServerMsgFormat.seq -pkt
> ./S_RFC3315_6_ServerMsgFormat.def
> -log 3.
> html -ti "Server/Client Message Format"
> ==== NUT Initialization ====
> vRemote("dhcp6s.rmt",
> "start","rapidcommit","link0=eth0","startaddr=3ffe:ffff:10
> 0::10","endaddr=3ffe:ffff:100::11")
>
> dhcp6s> Set parameters of DHCPv6 Server manually as following:
>
> dhcp6s> The interfaces used for DHCPv6 Server test is eth0.
> dhcp6s> The start address:3ffe:ffff:100::10.
> dhcp6s> The end address:3ffe:ffff:100::11.
> dhcp6s> The Server is rapidcommit enabled.
> dhcp6s>
>
> dhcp6s> Please start the DHCPv6 Server!
> dhcp6s> Then press the Enter.
>
> Start Capturing Packets (Link0)
> Clear Captured Packets (Link0)
> ==== Solicit Reply Message Exchange ====
> Send DHCPv6 Solicit Message: CLIENT1 --> all DHCPv6 Servers
> Solicit Message
>
> DHCPv6 OptionValues
> IdentifierIdentifier = 100
> Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
> DUID-LLT MAC = 00:00:00:00:a2:a2
> DUID-LLT TIME = 300000
> Opt_DHCPv6_RapidCommit*
>
> specified ns_nut_to_relay2_0 not found
> specified ns_nut_to_relay1_0 not found
> Could not get Reply Message
> NG: NUT did not send Reply Message.
>
> DHCPv6 Server stop
>
> dhcp6s> Please stop the DHCPv6 Server!
> dhcp6s> Then press the Enter.
>