Date: Fri, 9 Mar 2007 16:59:03 +0800 From: "Rommel Laranjo" <rslaranjo@gmail.com> Subject: [dhcptest:00151] Re: dhcptest To: dhcptest@tahi.org Message-Id: <f051005f0703090059v689816di93cd03f222265f80@mail.gmail.com> In-Reply-To: <0260031F55435342859BFB2CCA6773D81B8989CA@EXCHANGE03.jp.ykgw.net> References: <f051005f0703081901n4de1af50q73618e3930b2e968@mail.gmail.com> <0260031F55435342859BFB2CCA6773D81B8989CA@EXCHANGE03.jp.ykgw.net> X-Mail-Count: 00151hideshi, i am really sorry to disturb you but i appreciate so much your kindness and patience in helping me with this test. i have already allow rapid commit in my server, here is my configuration: # cat /usr/local/etc/dhcp6s.conf option refreshtime 5000; interface em0 { allow rapid-commit; address-pool pool1 10000 20000; }; pool pool1 { range 3ffe:501:ffff:100::10 to 3ffe:501:ffff:100::11 ; }; and this is the debug output during the test... it seems that wide-dhcpv6 did not received the rapid-commit option sent by the TN. Mar/09/2007 16:52:17: received solicit from fe80::200:ff:fe00:a2a2%em0 Mar/09/2007 16:52:17: get DHCP option client ID, len 14 Mar/09/2007 16:52:17: DUID: 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2 Mar/09/2007 16:52:17: client ID 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2 Mar/09/2007 16:52:17: set client ID (len 14) Mar/09/2007 16:52:17: set server ID (len 14) Mar/09/2007 16:52:17: transmit advertise to fe80::200:ff:fe00:a2a2%em0 thanks, Rommel On 3/9/07, Hideshi.Enokihara@jp.yokogawa.com < Hideshi.Enokihara@jp.yokogawa.com> wrote: > > Hi, > > In this test, you have to set rapidcommit function in your NUT. > > dhcp6s> Please enable the Server to support rapidcommit. > > The NUT sends Advertise message, not sends Reply if NUT does not support > rapidcommit. > So, TN says, "Could not get Reply Message". > > Thanks, > ________________________________ > > From: Rommel Laranjo [mailto:rslaranjo@gmail.com] > Sent: Friday, March 09, 2007 12:02 PM > To: Enokihara, Hideshi (Hideshi.Enokihara@jp.yokogawa.com); > dhcptest@tahi.org > Subject: [dhcptest:00149] Re: dhcptest > > > hello hideshi, > > thanks for the reply, the script is now running. now my problem > is this, > ========== TEST 2 ========== > ./S_RFC3315_5.1_UDPPorts.seq -pkt ./S_RFC3315_5.1_UDPPorts.def > -log 2.html -ti "UDP Port" > ==== NUT Initialization ==== > vRemote("dhcp6s.rmt", > "start","rapidcommit","link0=em0","startaddr=3ffe:501:ffff:100::10","end > addr=3ffe:501:ffff:100::11") > > dhcp6s> Set parameters of DHCPv6 Server manually as following: > > dhcp6s> The interfaces used for DHCPv6 Server test is em0. > dhcp6s> Please set following parameters of IA and IA_address > options in DHCPv6 server > dhcp6s> prefer-life-time 10000; > dhcp6s> valid-life-time 20000 > dhcp6s> renew-time(T1) 5000 > dhcp6s> rebind-time(T2) 16000 > dhcp6s> Please set the start address of which can be > assigned:3ffe:501:ffff:100::10. > dhcp6s> Please set the end address of which can be > assigned:3ffe:501:ffff:100::11. > dhcp6s> Please enable the Server to support rapidcommit. > dhcp6s> > > dhcp6s> Please start the DHCPv6 Server! > dhcp6s> Then press the Enter. > > Start Capturing Packets (Link0) > Clear Captured Packets (Link0) > ==== Solicit/Reply Message Exchange ==== > Send DHCPv6 Solicit Message: CLIENT1 --> all DHCPv6 > Servers > Solicit Message > > DHCPv6 OptionValues > IdentifierIdentifier = 100 > Opt_DHCPv6_CIDDUID-LLT HardwareType = 1 > DUID-LLT MAC = 00:00:00:00:a2:a2 > DUID-LLT TIME = 300000 > > Could not get Reply Message > NUT did not send Reply Message. > NG > DHCPv6 Server stop > =========================================== > It says that the NUT did not send Reply Message, but when i try > to run my dhcp6s with -dDf it said "transmit advertise to > fe80::200:ff:fe00:a2a2%em0" ... > > So with this, it seems that my TN did not received the > advertise. :( > > May I ask what could possibly be the problem? > > Thanks alot, > > Rommel > > > > > >151_2.html (attatchment)(tag is disabled)