#!/usr/bin/perl
#
#Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Yokogawa Electric Corporation.
#All rights reserved.
#
#Redistribution and use of this software in source and binary
#forms, with or without modification, are permitted provided that
#the following conditions and disclaimer are agreed and accepted
#by the user:
#
#1. Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
#
#2. Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in
#   the documentation and/or other materials provided with
#   the distribution.
#
#3. Neither the names of the copyrighters, the name of the project
#   which is related to this software (hereinafter referred to as
#   "project") nor the names of the contributors may be used to
#   endorse or promote products derived from this software without
#   specific prior written permission.
#
#4. No merchantable use may be permitted without prior written
#   notification to the copyrighters.
#
#5. The copyrighters, the project and the contributors may prohibit
#   the use of this software at any time.
#
#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
#CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
#BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
#FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
#COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
#(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
#SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
#STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
#IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#POSSIBILITY OF SUCH DAMAGE.
#
#$Id: C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.seq,v 1.3 2006/03/29 06:12:56 mnaoki Exp $
###############################################################################
BEGIN { $V6evalTool::TestVersion = '$Name: DHCPv6_1_0 $';
	push(@INC, '..');
}

use strict;
use V6evalTool;
use DHCPv6_common;
use Client_pktdesc;
dhcpExitNS  if ChkFuncSupport('AUTHENTICATION');

#--------------------------------------------------------------#
# Initialization variables
#--------------------------------------------------------------#
vLogHTML('<B>==== NUT Initialization ====</B><BR>');

# Configure authentication parametor
vLogHTML("<B>Authentication Information</B><BR>");
my $auth_realm = "DHCPv6.TEST.EXAMPLE.COM";
my $hex_auth_realm = Ascii2Hex($auth_realm);
my $auth_key_id = "1";
my $auth_sharedsecretkey = "TAHITEST_VALID12";
my $auth_sharedsecretkey_invalid = "TAHITEST_INVALID";
vLogHTML("&nbsp;&nbsp;REALM: $auth_realm<BR>");
vLogHTML("&nbsp;&nbsp;Key ID: $auth_key_id<BR>");
vLogHTML("&nbsp;&nbsp;Shared Secret Key: $auth_sharedsecretkey");
my $SHARED_SECRET_KEY_TYPE = ChkConfig('SHARED_SECRET_KEY_TYPE');
my $enc_auth_sharedsecretkey = SharedSecretKeyCheck($SHARED_SECRET_KEY_TYPE, $auth_sharedsecretkey);
vLogHTML("&nbsp;&nbsp;Device's Key Type: $SHARED_SECRET_KEY_TYPE, Encoded value: $enc_auth_sharedsecretkey<BR>");

my $IF0_NUT = $V6evalTool::NutDef{"Link0_device"};
my $IF0 = "Link0";

#-------------------------------------------------------------------
vLogHTML('<B>DHCP Client-Initiated Configuration Exchange using Delayed Authentication Protocol</B><BR>');
#-------------------------------------------------------------------

#--------------------------------------------------------------#
# Initialize DHCPv6 Client
#--------------------------------------------------------------#
# my $ret = vRemote("dhcp6c.rmt", "start", "authentication=delayed", "auth_realm=$auth_realm", "auth_keyid=$auth_key_id", "auth_sharedsecretkey=$enc_auth_sharedsecretkey", "link0=$IF0_NUT");
# if($ret != 0){
# 	vLogHTML('<FONT COLOR="#FF0000">Cannot Initialize DHCPv6 Client program.</FONT><BR>');
# 	dhcpExitFail;
# };
vCapture($IF0);

my $cpp = undef;

#--------------------------------------------------------------#
#1.  Wait until Info arrives 
#--------------------------------------------------------------#
# This is requried when Authentication option is used, otherwise not required.
$AUTH_OPTION_REQUIRED = $TRUE;
my ($retsol,%sol) = wait_for_information_request($IF0,30) ;
if($retsol != 0){
	dhcpExitFail("<B>Can't receive correct DHCPv6 Solicit message</B>"); 
}
vClear($IF0);

# check options in Solicit Message
if (0 != options_exist(\%sol, ($CMP_CID|$CMP_ORO|$CMP_RECONF_ACCEPT))){
 	dhcpExitError("<B>Do not include necessary options!</B>");
}

#--------------------------------------------------------------#
#4. send Reply message
#--------------------------------------------------------------#
my $auth_counter = '0000000000000001';
$ReconfigureAccept_OPTION = "opt_ReconfigureAccept";
$Authentication_OPTION = "opt_Auth";
$CID_OPTION = "opt_CID_LLT_client1";
$SID_OPTION = "opt_SID_LLT_server1";
$Preference_OPTION = "opt_Preference";
$cpp = "-DAUTH_INFO=auth_type_key "; 
$cpp .= "-DAUTH_PROTO=3 "; 
$cpp .= "-DAUTH_COUNTER=hexstr\\\(\\\"$auth_counter\\\",8\\\) "; 
$cpp .=	"-DAUTH_KEY_VALUE=\\\"$auth_sharedsecretkey\\\" ";
my ($retrep, %rep) = send_reply($IF0, "reply_server1_to_nut", \%sol, $cpp);
if($retrep !=0){
	dhcpExitFail;
}

#--------------------------------------------------------------#
#5. send Reconfigure message
#--------------------------------------------------------------#
clear_options();
$auth_counter = '0000000000000002';
$ReconfigureMessage_OPTION = "opt_ReconfigureMessage";

$Authentication_OPTION = "opt_Auth";
$CID_OPTION = "opt_CID_LLT_client1";
$SID_OPTION = "opt_SID_LLT_server1";
$cpp = "-DAUTH_INFO=auth_type_hmac "; 
$cpp .= "-DAUTH_PROTO=3 "; 
$cpp .= "-DAUTH_COUNTER=hexstr\\\(\\\"$auth_counter\\\",8\\\) "; 
$cpp .=	"-DAUTH_KEY_VALUE=\\\"$auth_sharedsecretkey_invalid\\\" ";
$cpp .= "-DRECONFIGURE_TYPE=11 "; 
my ($retrec, %rec) = send_reconfigure($IF0, "reconfigure_server1_to_nut",undef,$cpp);
if($retrec !=0){
	dhcpExitFail;
}

#--------------------------------------------------------------#
#6. wait for Info message
#--------------------------------------------------------------#
my ($retren, %ren) = wait_for_information_request($IF0, 30);

if ($retren == 0) {
	dhcpExitFail("<B>receive DHCPv6 Information message</B>"); 
}else{
	vLogHTML('<FONT COLOR="#FF0000">Do not receive DHCPv6 Information message</FONT><BR>');
}

vClear($IF0);

#-------------------------------------------------------------------
vLogHTML('<B><FONT COLOR=#006666>Information-Request/Reply Exchange finished, Receiving Reconfigure Message and validation test is failed is correct</FONT></B><BR>');
#-------------------------------------------------------------------
dhcpExitPass;

###############################################################################
__END__

=head1 NAME 

  C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.seq - Information-Request/Reply Exchange finished, Receiving Reconfigure Message and validation test is failed 

=head1 TARGET

  Client

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.seq"> C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.seq</A> [-tooloption...] -pkt  <A HREF="./C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.def"> C_RFC3315_21.5.3_ReconfigAuthInfoRepInvalid.def</A> -tooloption : v6eval tool option
<BR>
  See Also <A HREF="./DHCPv6.def"> DHCPv6.def </A> 
</PRE>

=end html

=head1 INITIALIZATION

=begin html
    <ul>
    <li><STRONG>Network Topology</STRONG></li> 
    <PRE>
          NUT(Client)
          |           
          |                        
Link0   --+--------+------------------------ 3ffe:501:ffff:101::/64
                   |
                   |          
                   TN(Server) 
    </PRE>
    <li><STRONG>Verification Points</STRONG></li><br>
    <PRE>
   The client will receive a Reconfigure Key from the server in the
   initial Reply message from the server.  The client records the
   Reconfigure Key for use in authenticating subsequent Reconfigure
   messages.
   <BR>
   To authenticate a Reconfigure message, the client computes an
   HMAC-MD5 over the DHCP Reconfigure message, using the Reconfigure Key
   received from the server.  If this computed HMAC-MD5 matches the
   value in the Authentication option, the client accepts the
   Reconfigure message. 
    </PRE>
    <li><STRONG>Configurations</STRONG></li><br>
    <PRE>
    Enable Reconfigure Key Authenticaion Protocol Service
    <BR>
    <TABLE BORDER="1">
    <TR>
    <TD><TT>Device Name</TT></TD>
    <TD><TT>Device Type</TT></TD>
    <TD><TT>Interface</TT></TD>
    <TD><TT>Assigned Prefix</TT></TD>
    <TD><TT>Link Local Addr</TT></TD>
    <TD><TT>MAC Addr</TT></TD>
    </TR>
    <TR>
    <TD><TT>Client</TT></TD>
    <TD><TT>NUT</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:101::/64</TT></TD>
    <TD><TT>NUT's Linklocal address</TT></TD>
    <TD><TT>NUT's MAC address</TT></TD>
    </TR>
    <TR>
    <TD><TT>Server</TT></TD>
    <TD><TT>TN</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:101::/64</TT></TD>
    <TD><TT>fe80::200:ff:fe00:a1a1</TT></TD>
    <TD><TT>00:00:00:00:a1:a1</TT></TD>
    </TR>
    </TABLE>
    </PRE>
    </ul>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
<BR>
       NUT     TN
        |       | 
        |       | Initialize NUT (as a DHCPv6 client)
        |       | 
        | ----> | <B>Information-Request w/Authentication Accept Option
        |       | and Option Request Option(Preference Option)</B>(*1)
        | <---- | Reply with Authentication Option and Preference Option(10)
        |       | 
        |       | Preference changed from 10 to 20
        |       | Reload server configuration 
        |       | 
        | <---- | Reconfigure with w/Invalid Authentication Option(Value field is invalid)
        |       | w/Reconfigure Message Option(msg-type=11) 
        |       | 
        | --> X | <B>Information-Request with Option Request Option(Preference Option)</B> (*4)
        |       | 
</PRE>

=end html

=head1 JUDGEMENT

=begin html
<PRE>
 (*1) PASS: TN receive Information-Request message with Authenticaion Accept option and 
            Option Request Option(Preference Option).
 (*4) PASS: TN does not receive Information-Request with Option Request Option(Preference Option).
</PRE>

=end html

=head1 TERMINATION

=begin html
<PRE>
  N/A
</PRE>

=end html

=head1 REFERENCE

=begin html
<PRE>
   see also RFC3315
   19.4.2. Creation and Transmission of Renew Messages
   21.5. Reconfigure Key Authentication Protocol
   21.5.3. Client considerations for Reconfigure Key protocol
</PRE>

=end html

=head1 SEE ALSO

=begin html
<PRE>
<BR>
  perldoc  V6evalTool
<BR>
</PRE>

=end html