#!/usr/bin/perl
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Yokogawa Electric Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $TAHI: ct-dhcpv6/dhcpv6.tahi/R_RFC3633_14_RelayPD.seq,v 1.17 2006/03/29 08:27:04 mnaoki Exp $
########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name: DHCPv6_1_0 $';
}

use strict;
use V6evalTool;
use DHCPv6_common;
use Server_pktdesc;

#--------------------------------------------------------------#
# Initialization
#--------------------------------------------------------------#

vLogHTML('<B>==== NUT Initialization ====</B><BR>');
my $IF0 = "Link0";
my $IF1 = "Link1";

my %NUT_Relay_Config = (
	'if_nut0'=> "$V6evalTool::NutDef{Link0_device}",
	'if_nut1' => "$V6evalTool::NutDef{Link1_device}",
	'if_add0' => "$NUTRELAY1_LINK0_GLOBAL_UCAST",
	'if_add1' => "$NUTRELAY1_LINK1_GLOBAL_UCAST",
	'if_length0' => "64",
	'if_length1' => "64",
	'if_type0'=> "unicast",
	'if_type1'=> "unicast",
	'init_opcode' => "vRemote(\"dhcp6r.rmt\", \"start\",\"link0=$V6evalTool::NutDef{Link0_device}\",\"link1=$V6evalTool::NutDef{Link1_device}\",\"servermulticast\",\"clientmulticast\")"
);

dhcpRelayInit(\%NUT_Relay_Config);

# set Options
$CID_OPTION = "opt_CID_LLT_client1";
$IA_PD_OPTION = "opt_IA_PD_Prefix";
my($ret1, %sol1) = send_solicit($IF1, "solicit_client1_to_alldhcp",undef);
dhcpExitFail if(0 != $ret1);

# Receive the Relay_Forward messge(Solicit)
my($ret2, %rfsol2) = wait_for_relay_forward_solicit($IF0,5);
 if (0 != $ret2){
 dhcpExitFail();
 } 

# Send the Relay Reply Messge(Advertise)
$CID_OPTION = "opt_CID_LLT_client1";
$SID_OPTION = "opt_SID_LLT_server1";
my ($ret3, %rradv3) = send_relay_reply($IF0,"relay_advertise_server1_to_client1_1relay",\%rfsol2,undef);
dhcpExitFail if(0 != $ret3);

# Receive the Advertise Message from $IF1
my ($ret4, %adv4) = wait_for_advertise($IF1,5);
dhcpExitFail if(0 != $ret4);

$CID_OPTION = "opt_CID_LLT_client1";
$IA_PD_OPTION = "opt_IA_PD_Prefix";
my ($ret5, %req5) = send_request($IF1, "request_client1_to_alldhcp",\%adv4,undef);
dhcpExitFail if (0!=$ret5);

#Receive the Relay_Forward message(Request)
my($ret6, %rfreq6) = wait_for_relay_forward_request($IF0,5);
if(0 != $ret6){
dhcpExitFail();
}


# Send the Relay-reply message(Reply)
$CID_OPTION = "opt_CID_LLT_client1";
$SID_OPTION = "opt_SID_LLT_server1";
$IA_PD_OPTION = "opt_IA_PD_Prefix";
$StatusCode_OPTION = "opt_StatusCode";
my ($ret7, %rradv7) = send_relay_reply($IF0,"relay_reply_server1_to_client1_1relay",\%rfreq6,undef);
dhcpExitFail if(0 != $ret3);


#Client1 Receive the Reply message
my ($ret8, %rep8) = wait_for_reply($IF1,5);
dhcpExitFail if(0 != $ret8);


#-------------------------------------------------------------------
vLogHTML("<B><FONT COLOR=#006666>The Message exchange is correct</FONT></B><BR>");
#-------------------------------------------------------------------
dhcpExitPass();
#NOTREACHED

########################################################################
__END__

=head1 NAME

  R_RFC3633_14_RelayPD.seq - Relay-forward Message containing IA_PD options

=head1 TARGET

  Relay agent

=head1 SYNOPSIS

=begin html
 <PRE>
 <A HREF="./R_RFC3633_14_RelayPD.seq">R_RFC3633_14_RelayPD.seq </A>[-tooloption ...]
 -pkt <A HREF="./R_RFC3633_14_RelayPD.def">R_RFC3633_14_RelayPD.def </A>
 -tooloption: v6eval tool option
See Also <A HREF="./DHCPv6.def"> DHCPv6.def </A>
 </PRE>

=head1 INITIALIZATION

=begin html
  <UL>
  <li><STRONG>Network Topology</STRONG></li>
  </UL>
 <PRE>
             TN(Requesting Router1)
               |
Link1 ---------+-----------+--------------- 3ffe:501:ffff:101::/64
                           |
                         NUT(Relay1)
                           |
Link0 ---------------------+----------+----- 3ffe:501:ffff:100::/64
                                      |
                                 TN(Delegating Router1)
  </PRE>
  <UL>
      <li><STRONG>Verification Points</STRONG><p>
      <PRE>The Relay-forward message is exchanged correctly with IA_PD option.</PRE>
  </UL>
  <UL>
      <li><STRONG>Configuration</STRONG></li>
	<BLOCKQUOTE>
	<TABLE BORDER>
	<TR>
	<TD><TT>Device Name</TT></TD>
	<TD><TT>Device Type</TT></TD>
	<TD><TT>I/F</TT></TD>
	<TD><TT>Assigned Prefix</TT></TD>
	<TD><TT>Link Local Addr</TT></TD>
	<TD><TT>MAC Addr</TT></TD>
	</TR>
	<TR>
	<TD><TT>Relay1(Link0)</TT></TD>
	<TD><TT>NUT</TT></TD>
	<TD><TT>Link0</TT></TD>
	<TD><TT>3ffe:501:ffff:100::/64</TT></TD>
	<TD><TT>NUT's Linklocal address(Link0)</TT></TD>
	<TD><TT>NUT's MAC address(Link0)</TT></TD>
	</TR>
	<TR>
	<TD><TT>Relay1(Link1)</TT></TD>
	<TD><TT>NUT</TT></TD>
	<TD><TT>Link1</TT></TD>
	<TD><TT>3ffe:501:ffff:101::/64</TT></TD>
	<TD><TT>NUT's Linklocal address(Link1)</TT></TD>
	<TD><TT>NUT's MAC address(Link1)</TT></TD>
	</TR>
	<TR>
	<TD><TT>Delegating Router1</TT></TD>
	<TD><TT>TN</TT></TD>
	<TD><TT>Link0</TT></TD>
	<TD><TT>3ffe:501:ffff:100::/64</TT></TD>
	<TD><TT>fe80::200:ff:fe00:a1a1</TT></TD>
	<TD><TT>00:00:00:00:a1:a1</TT></TD>
	</TR>
	<TR>
	<TD><TT>Requesting Router1</TT></TD>
	<TD><TT>TN</TT></TD>
	<TD><TT>Link1</TT></TD>
	<TD><TT>3ffe:501:ffff:101::/64</TT></TD>
	<TD><TT>fe80::200:ff:fe00:a2a2</TT></TD>
	<TD><TT>00:00:00:00:a2:a2</TT></TD>
	</TR>
	</TABLE>
	</BLOCKQUOTE>
  </UL>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
               TN     NUT(Relay1)TN
          (Delegating Router1)   (Requesting Router1)
	        |       |         |
	        |       |         |	initialize NUT (as a DHCPv6 Relay agent)
	        |       |         |
	        |       |  <----  |	Solicit	(w/ IA_PD option,IA_PD Prefix option)
	        | <---- |         |	Relay-forward(Solicit)	(w/ IA_PD option,IA_PD Prefix option)(*1)	
	        | ----> |         |	Relay-reply(Advertise)  (w/ IA_PD option,IA_PD Prefix option)   
	        |	|  ---->  |	Advertise		(w/ IA_PD option,IA_PD Prefix option)	
	        |       |         |
	        |       |  <----  |	Request	(w/ IA_PD option,IA_PD Prefix option)
	        | <---- |         |	Relay-forward(Request)	(w/ IA_PD option,IA_PD Prefix option)(*2)
	        | ----> |         |	Relay-reply(Reply)      (w/ IA_PD option,IA_PD Prefix option)
	        |	|  ---->  |	Reply                   (w/ IA_PD option,IA_PD Prefix option)
</PRE>

=end html

=head1 JUDGEMENT

<PRE>
(*1)PASS: Checking the format of Relay-forward Message.
(*2)PASS: Checking the format of Relay-forward Message.
</PRE>


=head1 TERMINATION

  N/A

=head1 REFERENCE

=begin html
<PRE>
  see also RFC3633
  14. Relay agent behavior
</PRE>

=end html

=head1 SEE ALSO

  perldoc V6evalTool

=cut