Test Information

TitleProcessing Invalid Information-request Message(w/IA)
CommandLine./S_RFC3315_15.12_InvalidInfoReqMsgWIA.seq -pkt ./S_RFC3315_15.12_InvalidInfoReqMsgWIA.def -log 48.html -ti Processing Invalid Information-request Message(w/IA)
TestVersionDHCPv6_1_0
ToolVersionREL_3_0_8
Start2006/03/30 09:33:54
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./S_RFC3315_15.12_InvalidInfoReqMsgWIA.def
Systemfreebsd-i386
TargetNameFreeBSD 5.4-RELEASE-p7
HostNameNS1.example.com
Typehost

Test Sequence Execution Log

09:33:54Start

 ==== NUT Initialization ====
vRemote("dhcp6s.rmt", "start","link0=bfe0","preference=10","startaddr=3ffe:501:ffff:100::10","endaddr=3ffe:501:ffff:100::11")
09:33:55 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/freebsd-i386//dhcp6s.rmt -t freebsd-i386 -u root -p v6eval -d cuaa0 -o 1 start link0=bfe0 preference=10 startaddr=3ffe:501:ffff:100::10 endaddr=3ffe:501:ffff:100::11'' 
eval $main::rOpt_start='1'
eval $main::rOpt_link0='bfe0'
eval $main::rOpt_preference='10'
eval $main::rOpt_startaddr='3ffe:501:ffff:100::10'
eval $main::rOpt_endaddr='3ffe:501:ffff:100::11'
Connected
prompt_user: ``login: '', prompt_password: ``Password:'', prompt_command: ``(\$|#) ''
rLogin: Wait for login prompt (0.2 sec)
rLogin: Never got prompt; try again
rLogin: Wait for login prompt (5 sec)

NS1# rLogin: Got command prompt
rLogin: Got command prompt
Make dhcp6s.conf
#;
#;
#;
#;
#;
#;

interface bfe0 {
#;
preference 10;
};

host TN{
duid 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;
#;
address 3ffe:501:ffff:100::10 10000 20000;
#;
};

#
#;
#;
#;
#;
Put local:freebsd-i386.dhcp6s.conf to remote:/tmp/dhcp6s.conf

NS1# ~[set] echocheck

NS1# rPutfile: Starting copying

NS1# ~[put] freebsd-i386.dhcp6s.conf /tmp/dhcp6s.conf
DNS1# 
NS1# rPutfile: Copying completed
Put local:freebsd-i386.dhcp6ctl.conf to remote:/tmp/dhcp6ctlkey

NS1# ~[set] echocheck

NS1# rPutfile: Starting copying

NS1# ~[put] freebsd-i386.dhcp6ctl.conf /tmp/dhcp6ctlkey
DNS1# 
NS1# rPutfile: Copying completed
_rCommand: Try to get command prompt (0.2 sec.)
_rCommand: Try to get command prompt ( sec.)

NS1# _rCommand: Do ``killall dhcp6s'' command
killall dhcp6s
sendMessagesSync: got echo back of killall dhcp6s
rCommand: Try to get command prompt (0.2 sec)
No matching processes were found
NS1# rCommand: CmdOutput=``
No matching processes were found
NS1''
echo $status
sendMessagesSync: got echo back of echo $status
1
rCommand: exit status: 1
Start dhcp6s
_rCommand: Try to get command prompt (0.2 sec.)
NS1# _rCommand: Do ``/usr/local/sbin/dhcp6s -D -c /tmp/dhcp6s.conf -k /tmp/dhcp6ctlkey bfe0'' command
/usr/local/sbin/dhcp6s -D -c /tmp/dhcp6s.conf -k /tmp/dhcp6ctlkey bfe0
sendMessagesSync: got echo back of /usr/local/sbin/dhcp6s -D -c /tmp/dhcp6s.conf -k /tmp/dhcp6ctlkey bfe0
rCommand: Try to get command prompt (0.2 sec)
NS1# rCommand: CmdOutput=``
NS1''
echo $status
sendMessagesSync: got echo back of echo $status
0
rCommand: exit status: 0
prompt_user: ``login: '', prompt_password: ``Password:'', prompt_command: ``(\$|#) ''
rLogout: skip by not specifing ``-l'' 
~
[EOT]
09:34:08Start Capturing Packets (Link0)
09:34:08Clear Captured Packets (Link0)
09:34:08 vSend(Link0,information_request_client1_to_alldhcp)
Send DHCPv6 Infomation Request Message: CLIENT1 --> all DHCPv6 Servers

InformationRequest Message
DHCPv6 OptionValues
Opt_DHCPv6_OptionRequestOptionCode = 7 OPTION_PREFERENCE
IdentifierIdentifier = 102
Opt_DHCPv6_IA_NAOption 1
Identifier= 101010
T1= 4000
T2= 5000
#IA_Addr Option
Addr= 3ffe:501:ffff:100::abcd
PreferredLifetime= 1000
ValidLifetime= 2000
09:34:09 vRecv(Link0,dhcp6_reply ns_nut_to_relay2_0 ns_nut_to_relay1_0 ns_nut_to_relay2_0_global_global ns_nut_to_relay1_0_global_global ns_nutga_to_any ns_nut_to_relay1_0_global ns_nut_to_any_global ns_nut_to_any_local) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 09:34:13
vRecv() return status=1

Could not get Reply Message
09:34:14 vSend(Link0,information_request_client1_to_alldhcp)
Send DHCPv6 Infomation Request Message: CLIENT1 --> all DHCPv6 Servers

InformationRequest Message
DHCPv6 OptionValues
Opt_DHCPv6_OptionRequestOptionCode = 7 OPTION_PREFERENCE
IdentifierIdentifier = 102
Opt_DHCPv6_IA_TAIdentifier= 202020
#IA_Addr Option
Addr= 3ffe:501:ffff:100::abcd
PreferredLifetime= 1000
ValidLifetime= 2000
Opt_DHCPv6_IA_NAOption 1
Identifier= 101010
T1= 4000
T2= 5000
#IA_Addr Option
Addr= 3ffe:501:ffff:100::abcd
PreferredLifetime= 1000
ValidLifetime= 2000
09:34:14 vRecv(Link0,dhcp6_reply ns_nut_to_relay2_0 ns_nut_to_relay1_0 ns_nut_to_relay2_0_global_global ns_nut_to_relay1_0_global_global ns_nutga_to_any ns_nut_to_relay1_0_global ns_nut_to_any_global ns_nut_to_any_local) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 09:34:16
vRecv() return status=1

Could not get Reply Message
The Messages Exchange is correct
*** Target test finish ***
DHCPv6 Server stop
09:34:19 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/freebsd-i386//dhcp6s.rmt -t freebsd-i386 -u root -p v6eval -d cuaa0 -o 1 stop '' 
eval $main::rOpt_stop='1'
Connected
prompt_user: ``login: '', prompt_password: ``Password:'', prompt_command: ``(\$|#) ''
rLogin: Wait for login prompt (0.2 sec)
rLogin: Never got prompt; try again
rLogin: Wait for login prompt (5 sec)

NS1# rLogin: Got command prompt
rLogin: Got command prompt
_rCommand: Try to get command prompt (0.2 sec.)
_rCommand: Try to get command prompt ( sec.)

NS1# _rCommand: Do ``killall dhcp6s'' command
killall dhcp6s
sendMessagesSync: got echo back of killall dhcp6s
rCommand: Try to get command prompt (0.2 sec)
NS1# rCommand: CmdOutput=``
NS1''
echo $status
sendMessagesSync: got echo back of echo $status
0
rCommand: exit status: 0
prompt_user: ``login: '', prompt_password: ``Password:'', prompt_command: ``(\$|#) ''
rLogout: skip by not specifing ``-l'' 
~
[EOT]
09:34:21Stop Capturing Packets (Link0)

 Stop Link0
OK
09:34:21End

Packet Reverse Log