#!/usr/bin/perl
#
#Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Yokogawa Electric Corporation.
#All rights reserved.
#
#Redistribution and use of this software in source and binary
#forms, with or without modification, are permitted provided that
#the following conditions and disclaimer are agreed and accepted
#by the user:
#
#1. Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
#
#2. Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in
#   the documentation and/or other materials provided with
#   the distribution.
#
#3. Neither the names of the copyrighters, the name of the project
#   which is related to this software (hereinafter referred to as
#   "project") nor the names of the contributors may be used to
#   endorse or promote products derived from this software without
#   specific prior written permission.
#
#4. No merchantable use may be permitted without prior written
#   notification to the copyrighters.
#
#5. The copyrighters, the project and the contributors may prohibit
#   the use of this software at any time.
#
#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
#CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
#BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
#FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
#COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
#(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
#SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
#STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
#IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#POSSIBILITY OF SUCH DAMAGE.
#
#$Id: C_RFC3315_18_1_3_RenRetransMRT.seq,v 1.15 2006/03/14 01:16:24 mnaoki Exp $
###############################################################################
BEGIN{
	$V6evalTool::TestVersion = '$Name: DHCPv6_1_0 $';
}
use strict;
use V6evalTool;
use DHCPv6_common;
use Client_pktdesc;
#--------------------------------------------------------------#
# Initialization variables
#--------------------------------------------------------------#
my $IF0_NUT = $V6evalTool::NutDef{"Link0_device"};
my $IF0 = "Link0";
my ($pretime, $nextime, $interval) = (0, 0, 0);
my ($plifetime, $vlifetime) = (8000, 9000);
my ($time1, $time2) = (40,2000);
my ($start, $rd, $MRD) = (0, 0, $time2);

my $IRT = $time1;
#--------------------------------------------------------------#
# Initialize DHCPv6 Client
#--------------------------------------------------------------#
my $ret = vRemote("dhcp6c.rmt", "start", "link0=$IF0_NUT");
if($ret != 0){
	vLogHTML('<FONT COLOR="#FF0000">Cannot Initialize DHCPv6 Client program!</FONT><BR>');
	dhcpExitFail;
};
vCapture($IF0);
#--------------------------------------------------------------#
#1.  Wait until Solicit arrives 
#--------------------------------------------------------------#
my ($retsol,%sol) = wait_for_solicit($IF0,30);
if($retsol != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
#2. Send Advertise to reply to Solicit
#--------------------------------------------------------------#
$SID_OPTION = "opt_SID_LLT_server1";
$IA_NA_OPTION = "opt_IA_NA_Addr_woStatus";
my ($retadv, %adv) = send_advertise($IF0, "advertise_server1_to_nut", \%sol, "");
if($retadv != 0){
	dhcpExitFail;
}
#--------------------------------------------------------------#
#3.  Wait until Request arrives 
#--------------------------------------------------------------#
my ($retreq, %req) = wait_for_request($IF0,30);
if($retreq != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
#4. send Reply message
#--------------------------------------------------------------#
$IA_NA_OPTION = "opt_IA_NA_Addr";
$StatusCode_OPTION = "opt_StatusCode";
my ($retrep, %rep) = send_reply($IF0, "reply_server1_to_nut", \%req, "-DIA_NA_TIME1=$time1 -DIA_NA_TIME2=$time2 -DIA_ADDR_PLTIME=$plifetime -DIA_ADDR_VLTIME=$vlifetime ");
if($retrep !=0){
	dhcpExitFail;
}
# wait for DAD completion
vRecv($IF0, 3, 0, 0, 'dadns_nutga');
vSleep(3);

$ret = undef;
$ret = ping_test($IF0);
if($ret != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
#5. Wait until rebind arrives 
#--------------------------------------------------------------#
my $timeout = $IRT;
my ($retren1,%ren1) = wait_for_renew($IF0, $timeout);
if($retren1 != 0){
	dhcpExitFail;
}
$pretime = getElapsedtime(\%ren1);
$start = $pretime;
vClear($IF0);

#--------------------------------------------------------------#
#6. Wait until retransmitted message arrives 
#--------------------------------------------------------------#
my ($retren2,%ren2) = (1, ());
while(check_equal($interval,$REN_MAX_RT,$RAND)){
	if($interval > 0){
		$timeout = (2 + $RAND) * $interval;  
	}else{
		$timeout = (1 + $RAND) * $IRT;
	}
	($retren2,%ren2) = wait_for_renew($IF0, $timeout);
	if($retren2 != 0){
		dhcpExitFail;
	}
	$nextime = getElapsedtime(\%ren2); 
	$rd = $nextime - $start;
	vClear($IF0);
	$interval = $nextime - $pretime;	
	vLogHTML("<FONT COLOR=\"#FF0000\">RT = $interval </FONT><BR>");
	$pretime = $nextime;
	if($rd > $MRD){
		vLogHTML('<FONT COLOR="#FF0000">Cann not reach REN_MAX_RT </FONT><BR>');
		dhcpExitFail;
	}
}
$ret = compare_message(\%ren1,\%ren2);
if($ret != 0){
	vLogHTML('<FONT COLOR="#FF0000">Message has been changed!</FONT><BR>');
	dhcpExitFail;
};
dhcpExitPass;
###############################################################################
__END__

=head1 NAME 

  C_RFC3315_18_1_3_RenRetransMRT.seq - Check MRT of Renew

=head1 TARGET

  Client

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./C_RFC3315_18_1_3_RenRetransMRT.seq"> C_RFC3315_18_1_3_RenRetransMRT.seq</A> [-tooloption...] <BR>  -pkt  <A HREF="./C_RFC3315_18_1_3_RenRetransMRT.def"> C_RFC3315_18_1_3_RenRetransMRT.def</A> <BR>  -tooloption : v6eval tool option
<BR>
  See Also <A HREF="./DHCPv6.def"> DHCPv6.def </A> 
</PRE>

=end html

=head1 INITIALIZATION

=begin html
  <ul>
  <li><STRONG>Network Topology</STRONG></li> 
   <PRE>
          NUT(Client)
          |           
          |                        
Link0   --+--------+------------------------ 3ffe:501:ffff:100::/64
                   |
                   |          
                   TN(Server) 
   </PRE>
  </ul>
  <ul> 
  <li><STRONG>Verification Points</STRONG></li><br>
   <PRE>
   The client transmits the message using the following parameters:<BR>
      IRT   REN_TIMEOUT    <BR>
      MRT   REN_MAX_RT     <BR>
      MRC   0              <BR>
      MRD   Remaining time until T2  <BR>
   RT for each transmission is based on the previous value of RT:<BR>
      RT = 2*RTprev + RAND*RTprev <BR>
   If (RT > MRT)  <BR>
      RT = MRT + RAND*MRT <BR>   
   </PRE>
  </ul>  
  <ul>
  <li><STRONG>Configurations</STRONG></li><br>
   <BR>
    <TABLE BORDER="1">
    <TR>
    <TD><TT>Device Name</TT></TD>
    <TD><TT>Device Type</TT></TD>
    <TD><TT>Interface</TT></TD>
    <TD><TT>Assigned Prefix</TT></TD>
    <TD><TT>Link Local Addr</TT></TD>
    <TD><TT>MAC Addr</TT></TD>
    </TR>
    <TR>
    <TD><TT>Client</TT></TD>
    <TD><TT>NUT</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:100::/64</TT></TD>
    <TD><TT>NUT's Linklocal address</TT></TD>
    <TD><TT>NUT's MAC address</TT></TD>
    </TR>
    <TR>
    <TD><TT>Server</TT></TD>
    <TD><TT>TN</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:100::/64</TT></TD>
    <TD><TT>fe80::200:ff:fe00:a1a1</TT></TD>
    <TD><TT>00:00:00:00:a1:a1</TT></TD>
    </TR>
    </TABLE>
  </ul>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
<BR>
       NUT      TN
        |       | 
        |       |Initialize NUT(as a DHCPv6 client)
        | ----> |<B>Solicit</B>
        | <---- |<B>Advertise</B>
        | ----> |<B>Request</B> 
        | <---- |<B>Reply</B> w/IA_NA option (T1=40, T2=2000)
        |       |
        | <---- |<B>Echo Request</B>
        | ----> |<B>Echo Reply</B>
        |       |	
        |       |Before T1 time expires
        |       |	 
        | ----> |<B>Renew</B> 
        |       |
        |       |Waiting for DHCPv6 message until RT=MRT+RAND*MRT
        |       |
        | ----> |<B>Renew</B> (8*)
        |       |
</PRE>

=end html

=head1 JUDGEMENT

=begin html
<PRE>
  (8*)PASS: MRT for Renew conforms to Verification Points.
</PRE>

=end html

=head1 TERMINATION

=begin html
<PRE>
  N/A
</PRE>

=end html

=head1 REFERENCE

=begin html
<PRE>
  Also see RFC3315
<BR>  
  18.1.3. Creation and Transmission of Renew Messages
<BR>
</PRE>

=end html

=head1 SEE ALSO

=begin html
<PRE>
<BR>
  perldoc  V6evalTool
<BR>
</PRE>

=end html