#!/usr/bin/perl
#
#Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Yokogawa Electric Corporation.
#All rights reserved.
#
#Redistribution and use of this software in source and binary
#forms, with or without modification, are permitted provided that
#the following conditions and disclaimer are agreed and accepted
#by the user:
#
#1. Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
#
#2. Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in
#   the documentation and/or other materials provided with
#   the distribution.
#
#3. Neither the names of the copyrighters, the name of the project
#   which is related to this software (hereinafter referred to as
#   "project") nor the names of the contributors may be used to
#   endorse or promote products derived from this software without
#   specific prior written permission.
#
#4. No merchantable use may be permitted without prior written
#   notification to the copyrighters.
#
#5. The copyrighters, the project and the contributors may prohibit
#   the use of this software at any time.
#
#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
#CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
#BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
#FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
#COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
#(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
#SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
#STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
#IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#POSSIBILITY OF SUCH DAMAGE.
#
#$Id: C_RFC3315_22_6_UseIAAddrLife.seq,v 1.13 2006/03/09 08:45:31 mnaoki Exp $
###############################################################################
BEGIN{
	$V6evalTool::TestVersion = '$Name: DHCPv6_1_0 $';
}
use strict;
use V6evalTool;
use DHCPv6_common;
use Client_pktdesc;
#--------------------------------------------------------------#
# Initialization variables
#--------------------------------------------------------------#
my $IF0_NUT = $V6evalTool::NutDef{"Link0_device"};
my $IF0 = "Link0";
my ($plifetime, $vlifetime) = (100, 200);
#--------------------------------------------------------------#
# Initialize DHCPv6 Client
#--------------------------------------------------------------#
my $ret = vRemote("dhcp6c.rmt", "start", "tempaddress","link0=$IF0_NUT");
if($ret != 0) {
	vLogHTML('<FONT COLOR="#FF0000">Cannot Initialize DHCPv6 Client program.</FONT><BR>');
	dhcpExitFail;
};
vCapture($IF0);
#--------------------------------------------------------------#
#1.  Wait until Solicit arrives 
#--------------------------------------------------------------#
my ($retsol,%sol) = wait_for_solicit($IF0,30) ;
if($retsol != 0){
	dhcpExitFail;
}
$ret = options_exist(\%sol,$CMP_IA_TA);
if($ret != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
# 2. send Advertise message 
#--------------------------------------------------------------#
$SID_OPTION = "opt_SID_LLT_server1";
$IA_TA_OPTION = "opt_IA_TA_Addr_woStatus";
my ($retadv, %adv) = send_advertise($IF0, "advertise_server1_to_nut", \%sol, "");
if($retadv != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
#3.  Wait until Request arrives 
#--------------------------------------------------------------#
my ($retreq,%req) = wait_for_request($IF0,30);
if($retreq != 0){
	dhcpExitFail;
}
vClear($IF0);
#--------------------------------------------------------------#
#4. send Reply message
#--------------------------------------------------------------#
$IA_TA_OPTION = "opt_IA_TA_Addr";
$StatusCode_OPTION = "opt_StatusCode";
my $cppstr = "-DIA_ADDR_PLTIME=$plifetime -DIA_ADDR_VLTIME=$vlifetime ";
my ($retrep, %rep) = send_reply($IF0, "reply_server1_to_nut", \%req,$cppstr);

vSleep(2);
#--------------------------------------------------------------#
#5. ping NUT
#--------------------------------------------------------------#
if (ping_test($IF0) != 0){
	vLogHTML('NG<BR>');
	dhcpExitFail;
}
#--------------------------------------------------------------#
# wait for timeout of valid-lifetime 
#--------------------------------------------------------------#
vSleep($vlifetime +5);
#--------------------------------------------------------------#
#6. ping NUT
#--------------------------------------------------------------#
if (ping_test($IF0) == 0){
	vLogHTML("<FONT COLOR=\"0xFF0000\"> Assigned temporary address should be expired! </FONT><BR>");
	dhcpExitFail;
}
vStop($IF0);
dhcpExitPass;

#NEED
###############################################################################
__END__

=head1 NAME 

  C_RFC3315_22_6_UseIAAddrLife.seq - Check the use of valid-lifetime of IA Address option

=head1 TARGET

  Client

=head1 SYNOPSIS

=begin html
<PRE>
  <A HREF="./C_RFC3315_22_6_UseIAAddrLife.seq"> C_RFC3315_22_6_UseIAAddrLife.seq</A> [-tooloption...] <BR>  -pkt <A HREF="./C_RFC3315_22_6_UseIAAddrLife.def"> C_RFC3315_22_6_UseIAAddrLife.def</A> <BR>  -tooloption : v6eval tool option
  See Also <A HREF="./DHCPv6.def"> DHCPv6.def </A> 
</PRE>

=end html

=head1 INITIALIZATION

=begin html
  <ul>
  <li><STRONG>Network Topology</STRONG></li> 
   <PRE>
          NUT(Client)
          |           
          |                        
Link0   --+--------+------------------------ 3ffe:501:ffff:100::/64
                   |
                   |          
                   TN(Server) 
   </PRE>
  </ul>
  <ul>  
  <li><STRONG>Verification Points</STRONG></li><br>
   <PRE>
   In a message sent by a server to a client, the client MUST use the 
   values in the preferred and valid lifetime fields for the preferred
   and valid lifetimes.  The values in the preferred and valid lifetimes
   are the number of seconds remaining in each lifetime.
 </PRE>
  </ul>
  <ul> 
  <li><STRONG>Configurations</STRONG></li><br>
   <BR>
    <TABLE BORDER="1">
    <TR>
    <TD><TT>Device Name</TT></TD>
    <TD><TT>Device Type</TT></TD>
    <TD><TT>Interface</TT></TD>
    <TD><TT>Assigned Prefix</TT></TD>
    <TD><TT>Link Local Addr</TT></TD>
    <TD><TT>MAC Addr</TT></TD>
    </TR>
    <TR>
    <TD><TT>Client</TT></TD>
    <TD><TT>NUT</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:100::/64</TT></TD>
    <TD><TT>NUT's Linklocal address</TT></TD>
    <TD><TT>NUT's MAC address</TT></TD>
    </TR>
    <TR>
    <TD><TT>Server</TT></TD>
    <TD><TT>TN</TT></TD>
    <TD><TT>Link0</TT></TD>
    <TD><TT>3ffe:501:ffff:100::/64</TT></TD>
    <TD><TT>fe80::200:ff:fe00:a1a1</TT></TD>
    <TD><TT>00:00:00:00:a1:a1</TT></TD>
    </TR>
    </TABLE>
  </ul>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
  
<BR>
       NUT      TN
        |       | 
        |       |Initialize NUT (as a DHCPv6 Client)
        |       | 
        | ----> |<B>Solicit</B> 
        | <---- |<B>Advertise</B> 
        | ----> |<B>Request</B> w/IA_TA Option 
        | <---- |<B>Reply</B> w/IA_TA Option(valid-lifetime = 200) 
        |       | 
        | <---- |<B>Echo Request</B> 
        | ----> |<B>Echo Reply</B> 
        |       | 
        |       |Before valid-lifetime time expires
        |       | 
        | <---- |<B>Echo Request</B> 
        | ----> |<B>Echo Reply</B> (8*)
        |       |
<BR>  
</PRE>

=end html

=head1 JUDGEMENT

=begin html
<PRE>
  (8*)PASS: NUT does NOT transmit Echo Reply.
</PRE>

=end html

=head1 TERMINATION

=begin html
<PRE>
  N/A
</PRE>

=end html

=head1 REFERENCE

=begin html
<PRE>
  Also see RFC3315
<BR>
  22.6. IA Address Option
<BR>
</PRE>

=end html

=head1 SEE ALSO

=begin html
<PRE>
<BR>
  perldoc  V6evalTool
<BR>
</PRE>

=end html