#!/usr/bin/perl
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Yokogawa Electric Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $TAHI: ct-dhcpv6/dhcpv6.tahi/S_RFC3315_BasicRebindRep.seq,v 1.23 2006/03/09 08:45:59 mnaoki Exp $
########################################################################
BEGIN { $V6evalTool::TestVersion = '$Name: DHCPv6_1_0 $';
}

use strict;
use V6evalTool;
use DHCPv6_common;
use Server_pktdesc;

#--------------------------------------------------------------#
# Initialization
#--------------------------------------------------------------#

vLogHTML('<B>==== NUT Initialization ====</B><BR>');
my $IF0 = "Link0";
#initial NUT config parameters,
my %NUT_Server_Config = (
	'if_nut0'=> "$V6evalTool::NutDef{Link0_device}",
	'init_opcode' => "vRemote(\"dhcp6s.rmt\", \"start\",\"link0=$V6evalTool::NutDef{Link0_device}\",\"startaddr=3ffe:501:ffff:100::10\",\"endaddr=3ffe:501:ffff:100::11\")"
);

dhcpSvrInit(\%NUT_Server_Config);
#--------------------------------------------------------------#
# Main Procedure
#--------------------------------------------------------------#
vLogHTML('<B>==== Rebind Reply Message Exchange  ====</B><BR>');




# set Options
$CID_OPTION = "opt_CID_LLT_client1";
$IA_NA_OPTION = "opt_IA_NA";

# send DHCPv6 Solicit Message
my ($ret1, %sol1) = send_solicit($IF0, "solicit_client1_to_alldhcp", "");




# wait for DHCPv6 Advertise Message
my ($ret2, %adv2) = wait_for_advertise($IF0, 5);
dhcpExitFail() if (0 != $ret2);

# add Options
$SID_OPTION = "opt_SID_ANY";
$IA_NA_OPTION = "opt_IA_NA";
# send DHCPv6 Request Message
send_request($IF0, "request_client1_to_alldhcp", \%adv2, "");

# wait for DHCPv6 Reply Message
my ($ret3, %rep3) = wait_for_reply($IF0, 5);
dhcpExitFail() if (0 != $ret3);

# send DHCPv6 Rebind Message
$IA_NA_OPTION = "opt_IA_NA_Addr_woStatus";
$SID_OPTION = undef;
my ($ret4, %rebind4) = send_rebind($IF0, "rebind_client1_to_alldhcp", \%rep3, "");

# wait for DHCPv6 Reply Message
my ($ret5, %rep5) = wait_for_reply($IF0, 5);
dhcpExitFail() if (0 != $ret5);

#-------------------------------------------------------------------
vLogHTML("<B><FONT COLOR=#006666>The  Basic Rebind/Reply Message Exchange is correct</FONT></B><BR>");
#-------------------------------------------------------------------





dhcpExitPass();
#NOTREACHED

########################################################################
__END__

=head1 NAME

  S_RFC3315_BasicRebindRep.seq - Basic Rebind/Reply Message Exchange 

=head1 TARGET

  Server

=head1 SYNOPSIS

=begin html
 <PRE>
 <A HREF="./S_RFC3315_BasicRebindRep.seq">S_RFC3315_BasicRebindRep.seq </A>[-tooloption ...]
 -pkt <A HREF="./S_RFC3315_BasicRebindRep.def">S_RFC3315_BasicRebindRep.def </A>
 -tooloption: v6eval tool option
See Also <A HREF="./DHCPv6.def"> DHCPv6.def </A>
 </PRE>

=head1 INITIALIZATION

=begin html
  <UL>
  <LI><STRONG>Network Topology</STRONG></LI>
  </UL>
  <PRE>
          TN(Client1)  
             |
Link0 -------+-----------+--------------- 3ffe:501:ffff:100::/64
                         |
                       NUT(Server1)
  </PRE>
  <UL>
      <LI><STRONG>Verification Points</STRONG></LI><P>
          <UL>
          <PRE>
Advertise Message Format
      <LI>msg-type</LI>
          <B>ADVERTISE(2)</B>
      <LI>transaction-id</LI>
	  <B>Any</B>
<BR>
Reply Message Format
      <LI>msg-type</LI>
          <B>REPLY(7)</B>
      <LI>transaction-id</LI>
	  <B>Any</B>
          </UL>
          </PRE>
  </UL>
  <UL>
      <LI><STRONG>Configuration</STRONG></LI>
  </UL>
	<BLOCKQUOTE>
	<TABLE BORDER>
	<TR>
	<TD><TT>Device Name</TT></TD>
	<TD><TT>Device Type</TT></TD>
	<TD><TT>I/F</TT></TD>
	<TD><TT>Assigned Prefix</TT></TD>
	<TD><TT>Link Local Addr</TT></TD>
	<TD><TT>MAC Addr</TT></TD>
	</TR>
	<TR>
	<TD><TT>Server1</TT></TD>
	<TD><TT>NUT</TT></TD>
	<TD><TT>Link0</TT></TD>
	<TD><TT>3ffe:501:ffff:100::/64</TT></TD>
	<TD><TT>NUT's Linklocal address</TT></TD>
	<TD><TT>NUT's MAC address</TT></TD>
	</TR>
	<TR>
	<TD><TT>Client1</TT></TD>
	<TD><TT>TN</TT></TD>
	<TD><TT>Link0</TT></TD>
	<TD><TT>3ffe:501:ffff:100::/64</TT></TD>
	<TD><TT>fe80::200:ff:fe00:a2a2</TT></TD>
	<TD><TT>00:00:00:00:a2:a2</TT></TD>
	</TR>
	</TABLE>
	</BLOCKQUOTE>

=end html

=head1 TEST PROCEDURE

=begin html
<PRE>
       NUT     TN
        |       | 
        |       | initialize NUT (as a DHCPv6 Server)
        |       | 
        | <---- | Solicit (IA_NA)
        | ----> | Advertise (*1)
        |       | 
        | <---- | Request 
        | ----> | Reply   (*2)
        |       | 
        | <---- | Rebind 
        | ----> | Reply   (*3)
        |       | 
</PRE>

=end html

=head1 JUDGEMENT

<PRE>
(*1) PASS: TN receives Advertise Message  (not checking the options in Message)
(*2) PASS: TN receives Reply Message (not checking the options in Message)
(*3) PASS: TN receives Reply Message (not checking the options in Message)
</PRE>

=head1 TERMINATION

  N/A

=head1 REFERENCE

=begin html
<PRE>
   see also RFC3315
   5.3. DHCP Message Types  [Page 13  Line 713]
                            [Page 14  Line 748]
   6. Client/Server Message Formats<BR>
</PRE>

=end html

=head1 SEE ALSO

  perldoc V6evalTool

=cut
<PRE>