Date: Tue, 21 Jul 2009 11:03:26 +0900
From: Yukiyo Akisada <akisada@tahi.org>
Subject: [dnstest:00084] Re: Help required on running ahi DNS tests
To: "Varma, Satya Anil" <satyaanilvarma.pinnamaraju@hp.com>
Cc: dnstest@tahi.org
Message-Id: <20090721110326.715740a2.akisada@tahi.org>
In-Reply-To: <4E25BD100911BA439AB57ED98DE9DF3A311FAE144C@GVW1156EXB.americas.hpqcorp.net>
References: <4E25BD100911BA439AB57ED98DE9DF3A311FAE144C@GVW1156EXB.americas.hpqcorp.net>
X-Mail-Count: 00084

Hi, Anil.

The test can be run manually by nut.def configuration as you did.

And DNS tester can be run over IPv4 and IPv6.

I guess that you want to test over IPv6, right?

For IPv6 testing, you need following addresses to be configured.

    Your printer:
        address: 3ffe:501:ffff:100::10
        default gateway: 3ffe:501:ffff:100::1
    Tester:
        address #1: 3ffe:501:ffff:100::1
        address #2: 3ffe:501:ffff:100::20
        address #3: 3ffe:501:ffff:100::30
        address #4: 3ffe:501:ffff:100::31
        address #5: 3ffe:501:ffff:100::32
        address #6: 3ffe:501:ffff:101::10
        address #7: 3ffe:501:ffff:101::11
        address #8: 3ffe:501:ffff:101::20
        address #9: 3ffe:501:ffff:101::30
        address #10: 3ffe:501:ffff:101::40
        address #11: 3ffe:501:ffff:101::50

Thanks,


On Thu, 16 Jul 2009 11:57:50 +0000
"Varma, Satya Anil" <satyaanilvarma.pinnamaraju@hp.com> wrote:

> Hi ,
> 
> As per Network topology attached below , I want to know the difference between AP Server and DNS Server  and a Router ..All three says as Test Node only
> Do i need to have two free bsd machines one for AP and DNS Server for the other one and router address where i need to configure ..or do i need to have different interfaces
> Two different networks 192.168.1.x and 192.168.0.x is also adding some confusion on configuring the setup
> 
> I am planning to run Tahi DNS tests  on printer device , Rite now my setup has only two machines ...one is printer and the other one is  freebsd machine
> 
> My setup details:
> 
> I have only two devices connected in the network
> 
> 1. Printer : Configured with IPv4 Address : 192.168.0.10
>                                     Gateway       : 192.168.0.1
>                                     IPv6 Address :3ffe:501:ffff:100::Printer MAC address
> 
> 2. Freebsd 6.4: IPv4 Address : 192.168.0.1 and list of alias address starting from 192.168.0.20 to 192.168.0.30
>                IPv6 Address : 3ffe:501:ffff:100::1
> 
> [cid:675454411@16072009-3764]
> 
> 
> 
> I am not sure of what below addresses to configure for my printer and freebsd interface...Can anyone please help me on this ?
> 
> Can i run DNS Tahi tests for my printer using  remote method : none or manual because my printer doesnot support SSH or CU or any remote method
> If yes can you please guide me on how to run DNS tests successfully?
> Can you also please clarify me on this
> 
> I tried giving System as "Manual" in koi/etc/ nut.def but still test cases fail to contact my printer
> 
> Thanks in Advance ,
> Anil
> 


-- 
Yukiyo Akisada <akisada@tahi.org>