NAME

  S_RFC3315_18.2.3_ReplyNoBidingStutusCodeReceiptRenewMsg.seq - Reply with the IA (No address & w/ Status Code NoBiding)

TARGET

  Server

SYNOPSIS

 S_RFC3315_18.2.3_ReplyNoBindingStutusCodeReceiptRenewMsg.seq [-tooloption ...] 
 -pkt S_RFC3315_18.2.3_ReplyNoBindingStutusCodeReceiptRenewMsg.def 
 -tooloption: v6eval tool option
See Also  DHCPv6.def 
 

INITIALIZATION

• Network Topology

          TN(Client1)  
             |
Link0 -------+-----------+--------------- 3ffe:501:ffff:100::/64
                         |
                       NUT(Server1)
  

• Verification Points

 If the server cannot find a client entry for the IA the server
returns the IA containing no addresses with a Status Code option set
to NoBinding in the Reply message.
And there is not any Success in the Reply message.

Reply Message
	
msg-type
	REPLY(7)
	
Don't include Status Code option(w/Success(0))
	
IA_NA option
	
contain no IA address option
	
contain Status Code option(w/ NoBinding(3))
	

• Configuration

Device Name	Device Type	I/F	Assigned Prefix	Link Local Addr	MAC Addr
Server1	NUT	Link0	3ffe:501:ffff:100::/64	NUT's Linklocal address	NUT's MAC address
Client1	TN	Link0	3ffe:501:ffff:100::/64	fe80::200:ff:fe00:a2a2	00:00:00:00:a2:a2

• Server setup
The server cannot find a client entry for the IA_NA of the Renew message

TEST PROCEDURE

       NUT     TN
        |       | 
        |       | initialize NUT (as a DHCPv6 Server)
        |       | 
        | <---- | Solicit
        | ----> | Advertise
        | <---- | Request
        | ----> | Reply
        |       | 
        |       | 
        |       | 
        | <---- | Renew (Different IA_NA ID number)
        | ----> | Reply  (w/IA_NA) 	(*1)
        |       |

JUDGEMENT

(*1) PASS:  NUT send Reply message with IA_NA option(w/o IA_Address w/ Status Code NoBinding).
            And it don not include a "Success" status code option.

TERMINATION

REFERENCE

   see also RFC3315
   18 DHCP Client-Initiated Configuration Exchange
   18.2.3. Receipt of Renew Messages

SEE ALSO