Test Information

TitlePart A : Relay-Reply message transmission
CommandLine./S_RFC3736_Creation-Transmission_RelayReply.seq -pkt ./S_RFC3736_Creation-Transmission_RelayReply.def -log 26.html -ti Part A : Relay-Reply message transmission
TestVersionDHCPv6_Self_Test_P2_1_0_14
ToolVersionREL_3_0_15
Start2008/11/17 22:36:37
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./S_RFC3736_Creation-Transmission_RelayReply.def
Systemdibbler
TargetNameFedora7 2.6.21-1.3194.fc7
HostNametarget.tahi.org
Typehost

Test Sequence Execution Log

22:36:37Start

 ==== NUT Initialization ====
22:36:37 vSend(Link0,ra_server2_to_all_addr_assign)
Send RA(O =1) TR --> All
22:36:37 vRecv(Link0,dadns_nutga) timeout:3 cntLimit:0 seektime:0
vRecv() return status=1
22:36:40 Wait 3 second

vRemote("dhcp6s.rmt", "start","link0=eth0","stateless","dns=3ffe:501:ffff:100:200:ff:fe00:3f3e","valduid=00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2")
22:36:43 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/dibbler//dhcp6s.rmt -t dibbler -u root -p v6eval -d cuad0 -o 1 start link0=eth0 stateless dns=3ffe:501:ffff:100:200:ff:fe00:3f3e valduid=00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2'' 
Connected

[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server stop
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Process is not running.
[root@localhost ~]# echo $?
255
[root@localhost ~]# rm -f /var/lib/dibbler/*.xml
rm: 照合パターンに合いません.
[root@localhost ~]# echo $?
1
[root@localhost ~]# ~[set] echocheck

[root@localhost ~]# 
[root@localhost ~]# ~[put] ./ztemp /etc/dibbler/server.conf
root@localhost ~]# 
[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server  start
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Starting daemon...
[root@localhost ~]# echo $?
0
[ro~
[EOT]
22:36:54Start Capturing Packets (Link0)
22:36:54Clear Captured Packets (Link0)
22:36:54Clear Captured Packets (Link0)

 ==== Creation and Transmission of Relay Reply Messages #1 ====
22:36:54 vSend(Link0,relayforward_infomationrequest_client1_to_alldhcp_send)
send relayforward_infomationrequest_client1_to_alldhcp_send

Relay-forward Message
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
Relay Message Option
InformationRequest Message in Relay Message Option
DHCPv6 OptionValues
Opt_DHCPv6_OptionRequestOptionCode = 23 OPTION_DNS_SERVERS
IdentifierIdentifier = 102
Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
DUID-LLT MAC = 00:00:00:00:a2:a2
DUID-LLT TIME = 300000
Opt_DHCPv6_ElapsedTimeTime = 0
22:36:54 vRecv(Link0,relay_reply_nut_relay ns_nutga_to_any_lla ns_nut_to_relay1_0 ns_nutlla_to_any_server1_lla ns_nut_to_relay2_0_global_global ns_nut_to_relay1_0_global ns_nutlla_to_any_client2_lla ns_nut_to_relay2_0 ns_nut_to_relay2_0_global ns_nutlla_to_server1_ga ns_nut_to_relay1_0_global_global ns_nutga_to_any ns_nutlla_to_any_client1_lla ns_nut_to_any_global) timeout:5 cntLimit:0 seektime:0
recv relay_reply_nut_relay

Relay-reply Message
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
Relay Message Option
Reply Message in Relay Message Option
DHCPv6 OptionValues
Opt_DHCPv6_SIDDUID-LLT HardwareType = 1
DUID-LLT MAC = 00:0d:56:0e:10:e8
DUID-LLT TIME = 1126813816
IdentifierIdentifier = 102
Opt_DHCPv6_CIDDUID-LLT HardwareType = 1
DUID-LLT MAC = 00:00:00:00:a2:a2
DUID-LLT TIME = 300000
Opt_DHCPv6_DNS_ServersDNS = 3ffe:501:ffff:100:200:ff:fe00:3f3e
The Index is Frame_Ether.Packet_IPv6.Upp_UDP.Udp_DHCPv6_RelayReply.Opt_DHCPv6_RelayMessage.Udp_DHCPv6_Reply
Received DHCPv6 Relay Reply Message
Destination address is 3ffe:501:ffff:100:200:ff:fe00:a4a4
HopCount matched.:0 == 0
LinkAddr matched.:3ffe:501:ffff:100:203:47ff:fe6e:ab44 == 3ffe:501:ffff:100:203:47ff:fe6e:ab44
PeerAddr matched.:fe80::200:ff:fe00:a2a2 == fe80::200:ff:fe00:a2a2
Checking existing option...
Opt_DHCPv6_RelayMessage found
 Relay Message option Code = 9
Relay Message option Length = 62
Relay Message option DHCP-relqy-message = Type Identifier Opt_DHCPv6_CID Opt_DHCPv6_DNS_Servers Opt_DHCPv6_SID
CID = Code Length DHCPv6_DUID_LLT_Ether
SID = Code Length DHCPv6_DUID_LLT_Ether
DNS = Code Length Address
Relay-Reply message transmission is correct
22:36:54Clear Captured Packets (Link0)
22:36:54Stop Capturing Packets (Link0)

 *** Target test finish ***
DHCPv6 Server stop
22:36:54 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/dibbler//dhcp6s.rmt -t dibbler -u root -p v6eval -d cuad0 -o 1 stop '' 
Connected

[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server stop
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Sending KILL signal to process 2137
[root@localhost ~]# echo $?
0
[root@localhost ~]# rm -f /var/lib/dibbler/*.xml
[root@localhost ~]# echo $?
0
[ro~
[EOT]
22:36:55Stop Capturing Packets (Link0)

 Stop Link0
OK
22:36:55End

Packet Reverse Log