Test Information

TitlePart C : Relay-Reply message transmission through the Layered Relay agents
CommandLine./S_RFC3736_Relay-replyLayerdRelay.seq -pkt ./S_RFC3736_Relay-replyLayerdRelay.def -log 28.html -ti Part C : Relay-Reply message transmission through the Layered Relay agents
TestVersionDHCPv6_Self_Test_P2_1_0_14
ToolVersionREL_3_0_15
Start2008/11/17 22:37:41
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./S_RFC3736_Relay-replyLayerdRelay.def
Systemdibbler
TargetNameFedora7 2.6.21-1.3194.fc7
HostNametarget.tahi.org
Typehost

Test Sequence Execution Log

22:37:41Start

 ==== NUT Initialization ====
22:37:41 vSend(Link0,ra_server2_to_all_addr_assign)
Send RA(O =1) TR --> All
22:37:42 vRecv(Link0,dadns_nutga) timeout:3 cntLimit:0 seektime:0
vRecv() return status=1
22:37:45 Wait 3 second

vRemote("dhcp6s.rmt", "start","link0=eth0","stateless","dns=3ffe:501:ffff:100:200:ff:fe00:3f3e","valduid=00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2")
22:37:48 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/dibbler//dhcp6s.rmt -t dibbler -u root -p v6eval -d cuad0 -o 1 start link0=eth0 stateless dns=3ffe:501:ffff:100:200:ff:fe00:3f3e valduid=00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2'' 
Connected

[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server stop
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Process is not running.

[root@localhost ~]# 
[root@localhost ~]# echo $?
255
[root@localhost ~]# rm -f /var/lib/dibbler/*.xml
rm: 照合パターンに合いません.
[root@localhost ~]# echo $?
1
[root@localhost ~]# ~[set] echocheck

[root@localhost ~]# 
[root@localhost ~]# ~[put] ./ztemp /etc/dibbler/server.conf
root@localhost ~]# 
[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server  start
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Starting daemon...
[root@localhost ~]# echo $?
0
[ro~
[EOT]
22:37:58Start Capturing Packets (Link0)
22:37:58Clear Captured Packets (Link0)
22:37:58Clear Captured Packets (Link0)

 ==== Creation and Transmission of Relay Reply Messages #1 ====
22:37:58 vSend(Link0,relayforward_infomationrequest_client1_to_relay2_to_relay1_alldhcp_send)
send relayforward_infomationrequest_client1_to_relay2_to_relay1_alldhcp_send

Relay-forward Message
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
Relay Message Option
RelayForward Message in Relay Message Option
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
22:37:58 vRecv(Link0,relay_reply_nut_relay ns_nutga_to_any_lla ns_nut_to_relay1_0 ns_nutlla_to_any_server1_lla ns_nut_to_relay2_0_global_global ns_nut_to_relay1_0_global ns_nutlla_to_any_client2_lla ns_nut_to_relay2_0 ns_nut_to_relay2_0_global ns_nutlla_to_server1_ga ns_nut_to_relay1_0_global_global ns_nutga_to_any ns_nutlla_to_any_client1_lla ns_nut_to_any_global) timeout:5 cntLimit:0 seektime:0
recv relay_reply_nut_relay

Relay-reply Message
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
Relay Message Option
RelayReply Message in Relay Message Option
DHCPv6 OptionValues
Opt_DHCPv6_RelayMessage
The Index is Frame_Ether.Packet_IPv6.Upp_UDP.Udp_DHCPv6_RelayReply.Opt_DHCPv6_RelayMessage.Udp_DHCPv6_RelayReply
Received DHCPv6 Relay Reply Message
HopCount matched.:1 == 1
LinkAddr matched.::: == ::
PeerAddr matched.:3ffe:501:ffff:101:200:ff:fe00:a7a7 == 3ffe:501:ffff:101:200:ff:fe00:a7a7
HopCount matched.:0 == 0
LinkAddr matched.:3ffe:501:ffff:102:200:ff:fe00:a8a8 == 3ffe:501:ffff:102:200:ff:fe00:a8a8
PeerAddr matched.:fe80::200:ff:fe00:a2a2 == fe80::200:ff:fe00:a2a2
The Message exchange is correct
22:37:58Clear Captured Packets (Link0)
22:37:58Stop Capturing Packets (Link0)

 *** Target test finish ***
DHCPv6 Server stop
22:37:58 vRemote(dhcp6s.rmt) ``/usr/local/v6eval//bin/dibbler//dhcp6s.rmt -t dibbler -u root -p v6eval -d cuad0 -o 1 stop '' 
Connected

[root@localhost ~]# 
[root@localhost ~]# /usr/sbin/dibbler-server stop
| Dibbler - a portable DHCPv6, version 0.7.2 (SERVER, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
Sending KILL signal to process 2155

[root@localhost ~]# 
[root@localhost ~]# echo $?
0
[root@localhost ~]# rm -f /var/lib/dibbler/*.xml
[root@localhost ~]# echo $?
0
[ro~
[EOT]
22:38:00Stop Capturing Packets (Link0)

 Stop Link0
OK
22:38:00End

Packet Reverse Log