R_RFC2408_5_4_2_3_P2_SA_3 - [Responder Test] Check the proposal to confirm it is valid(ESP Authentication)
End-Node
R_RFC2408_5_4_2_3_P2_SA_3.seq [-tooloption ...] -pkt R_RFC2408_5_4_2_3_P2_SA_3.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN):initiator
|3ffe:501:ffff:101::11
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
|
ROUTER-1(TN)
|3ffe:501:ffff:100::11
|
Net-z --+--------+------------------------ 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100:XXXX
NUT:responder
XXXX: EUI64 address
Verification Points
Process the remaining payloads (i.e. Proposal, Transform) of the
Security Association Payload. If the Security Association
Proposal (as described in sections 5.5 and 5.6) is not accepted,
then the following actions are taken:
(a) The event, INVALID PROPOSAL, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the NO-PROPOSAL-CHOSEN message type MAY be sent
to the transmitting entity. This action is dictated by a
system security policy.
Configuration
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
Upper |
| NUT |
NUT addr |
HOST-2 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
NUT addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
| HOST-2 |
HOST-2 addr |
NUT addr |
Main |
IKE-TEST |
3DES |
SHA |
Pre-shared key |
2 |
8 Hour |
HOST-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
61439 |
8 Hour |
any |
*Ex Mode = Exchange mode(Aggresive mode can also be chosen as Ex Mode)
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*NUT addr = NUT address
*HOST-2 addr = HOST-2 address
This test check is following.
* PHASE I
Either IDENTITY PROTECTION EXCHANGE or AGGRESSIVE EXCHANGE is performed as a pre sequence.
IDENTITY PROTECTION EXCHANGE
# Initiator(TN) Direction Responder(NUT)
(1) HDR; SA ========>
(2) <======== HDR; SA
(3) HDR; KE; NONCE ========>
(4) <======== HDR; KE; NONCE
(5) HDR*; IDii; HASH_I ========>
(6) <======== HDR*; IDir; HASH_R
1. Send the first message from TN
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
2. Receive the second message from NUT
In the second message (2), the responder indicates the protection
suite it has accepted with the Security Association, Proposal, and
Transform payloads.
3. Send the third message from TN
In the third (3) message, the initiator send keying material
used to arrive at a common shared secret and random information
which is used to guarantee liveness and protect against replay attacks.
4. Receive the fourth message from NUT
In the fourth (4) message, the responder send keying material
used to arrive at a common shared secret and random information
which is used to guarantee liveness and protect against replay attacks.
5. Send the fifth message from TN
In the fifth (5) message, the initiator send identification
information and the results of the agreed upon authentication
function(hash function).
6. Receive the sixth message from NUT
In the sixth (6) message, the responder send identification
information and the results of the agreed upon authentication
function(hash function).
AGGRESSIVE EXCHANGE
# Initiator(TN) Direction Responder(NUT) NOTE
(1) HDR; SA; KE; => Begin ISAKMP-SA or
Proxy negotiation
NONCE; IDii and Key Exchange
(2) <= HDR; SA; KE;
NONCE; IDir; AUTH
Initiator Identity
Verified by Responder
Key Generated
Basic SA agreed upon
(3) HDR*; AUTH =>
Responder Identity
Verified by Initiator
SA established
1. Send the first message from TN
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes). There
can be only one Proposal and one Transform offered (i.e. no choices)
in order for the aggressive exchange to work. Keying material used
to arrive at a common shared secret and random information which is
used to guarantee liveness and protect against replay attacks are
also transmitted. Random information provided by both parties SHOULD
be used by the authentication mechanism to provide shared proof of
participation in the exchange. Additionally, the initiator transmits
identification information.
2. Recieve the second message from NUT
In the second message (2), the responder indicates the protection
suite it has accepted with the Security Association, Proposal, and
Transform payloads. Keying material used to arrive at a common
shared secret and random information which is used to guarantee
liveness and protect against replay attacks is also transmitted.
Random information provided by both parties SHOULD be used by the
authentication mechanism to provide shared proof of participation in
the exchange. Additionally, the responder transmits identification
information. All of this information is transmitted under the
protection of the agreed upon authentication function. Local
security policy dictates the action of the responder if no proposed
protection suite is accepted. One possible action is the
transmission of a Notify payload as part of an Informational
Exchange.
3. Send the third message from TN
In the third (3) message, the initiator transmits the results of the
agreed upon authentication function. This information is transmitted
under the protection of the common shared secret. Local security
policy dictates the action if an error occurs during these messages.
One possible action is the transmission of a Notify payload as part
of an Informational Exchange.
The test sequence is following.
* PHASE II
QUICK MODE
# Initiator(TN) Direction Responder(NUT)
(1) HDR*, HASH(1),
SA, Ni ========> <-----invalid proposal
(2-A) X <======== HDR*, HASH(2), SA, Nr <-----Must not transmit
or
(2-B) <======== HDR*, HASH(1), N/D;
Judgement (Check *1)
1. Send the first message from TN
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
And initiator send HASH(1) and Nonce. HASH(1) is the prf over the
message id (M-ID) from the ISAKMP header concatenated with the entire
message that follows the hash including all payload headers,
but excluding any padding added for encryption. Nonce is random
information which is used to guarantee liveness.
2. Receive the second message from NUT
In the second message (2-B), the responder indicates either an ISAKMP
Notify Payload or an ISAKMP delete Payload.
In Phase I , messages must be exchanged correctly.
In Phase II , the first message must not be accepted.
And the second message(2-A) must not be returned
(* or NO-PROPOSAL-CHOSEN message(2-B) is returned).
*option : if you want to check the retruned Notify message.
Clean up SAD and SPD
RFC2408
5.4 Security Association Payload Processing
(omit)
When a Security Association payload is received, the receiving entity
(initiator or responder) MUST do the following:
1. Determine if the Domain of Interpretation (DOI) is supported. If
the DOI determination fails, the message is discarded and the
following actions are taken:
(a) The event, INVALID DOI, MAY be logged in the appropriate
system audit file.
(b) An Informational Exchange with a Notification payload
containing the DOI-NOT-SUPPORTED message type MAY be sent to
the transmitting entity. This action is dictated by a
system security policy.
2. Determine if the given situation can be protected. If the
Situation determination fails, the message is discarded and the
following actions are taken:
(a) The event, INVALID SITUATION, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the SITUATION-NOT-SUPPORTED message type MAY be
sent to the transmitting entity. This action is dictated by
a system security policy.
3. Process the remaining payloads (i.e. Proposal, Transform) of the
Security Association Payload. If the Security Association
Proposal (as described in sections 5.5 and 5.6) is not accepted,
then the following actions are taken:
(a) The event, INVALID PROPOSAL, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the NO-PROPOSAL-CHOSEN message type MAY be sent
to the transmitting entity. This action is dictated by a
system security policy.
(omit)
perldoc V6evalTool
IKE.html IKE Test Common Utility