NAME

  SG_I_RFC2409_4_6_2 - [Initiator Test] Transform payload SA Attributes check (DES)

TARGET

SGW

SYNOPSIS

  SG_I_RFC2409_4_6_2.seq [-tooloption ...] -pkt SG_I_RFC2409_4_6_2.def -tooloption : v6eval tool option

 See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def

INITIALIZATION

Network Topology

                                 HOST-2(TN)
                                   |3ffe:501:ffff:104::11
                                   |
Net-v   --+------------------------+-------- 3ffe:501:ffff:104::/64
          |
          |
         SGW-2(TN):responder
          |3ffe:501:ffff:103::11
          |                     
Net-w   --+--------+------------------------ 3ffe:501:ffff:103::/64
                   |
                   |
                  ROUTER-2(TN)
                   | 3ffe:501:ffff:102::11
                   |
Net-x   --+--------+------------------------ 3ffe:501:ffff:102::/64
          |
          |3ffe:501:ffff:102::1
         SGW-1(NUT):initiator
          |3ffe:501:ffff:101::1
          |
Net-y   --+--------+------------------------ 3ffe:501:ffff:101::/64
                   |
                   | 3ffe:501:ffff:101::11
                  ROUTER-1(TN)
                   |
                   |
Net-z   -----------+---------------+-------- 3ffe:501:ffff:100::/64
                                   |
                                   |3ffe:501:ffff:100::13
                                 HOST-1(TN)

Verification Points

IKE implementations MUST support the following attribute values

Parameter Value

ISAKMP SA Attributes - DES in CBC mode
- MD5
- Authentication via pre-shared keys.
- MODP over default group number one.

So, IKE implementations MUST support DES.

Configuration

       Initiator and Responder IKE parameter
(It is shown that the mark of "*" permits anythings as attributes.)
At least, following parameter must be included in proposal.
          
          
          
            Machine              
            Src              
            Dest              
            Phase I             
            Phase II
                       
                       
            Ex mode
            Key Value 
            Enc Alg
            Hash Alg           
            Auth Method           
            DH Group           
            PH1 Lt
            IDx
            Proto ID
            Trans ID
            Mode
            Auth Alg 
            PH2 Lt
            IDci
            IDcr
            Upper
          
          
            SGW-1           
            SGW-1 addr           
            SGW-2 addr           
            Main  
            IKE-TEST                               
            DES           
            SHA*           
            pre-shared key*           
            2*           
            8 Hour            
            SGW-1 addr              
            PROTO_IPSEC_ESP   
            ESP_3DES            
            Tunnel           
            HMAC-SHA  
            8 Hour            
            Net-z addr          
            Net-v addr   
            any            
             
             
            SGW-2
            SGW-2 addr
            SGW-1 addr
            Main
            IKE-TEST      
            DES
            SHA
            pre-shared key           
            2           
            8 Hour
            SGW-2 addr    
            PROTO_IPSEC_ESP 
            ESP_3DES   
            Tunnel
            HMAC-SHA
            8 Hour 
            Net-z addr          
            Net-v addr   
            any
          
          
        
          *Ex Mode = Exchange mode
          *IDx = identity payload(FQDN or user FQDN  can also be chosen as IDx)
          *IDci = identity payload
          *IDcr = identity payload
          *Enc Alg = IKE Encryption Algorithm
          *Hash Alg = IKE Authentication Algorithm
          *Key Value = pre-shared key value
          *PH1 Lt = Phase-1 Lifetime
          *PH2 Lt = Phase-2 Lifetime
          *Proto ID = Protocol Identifier
          *Trans ID = Transform Identifier
          *Mode = Encapsulation Mode
          *Auth Alg = Authentication Algorithm
          *Auth Method = Authentication Method
          *DH Group = Diffie-Hellman Group
          *Upper = Upper Layer Protocol
          *SGW-1 addr = SGW-1 address
          *SGW-2 addr = SGW-2 address
          *Net-z = Net-z network address
          *Net-v = Net-v network address

Pre-Sequence

       In order to start the negotiation of IKE, 
       TN(HOST-1) transmits Echo Request to TN(HOST-2).

TEST PROCEDURE

  This test check is following.


           IDENTITY PROTECTION EXCHANGE


 #   Initiator(NUT)   Direction    Responder(TN)
(1)  HDR; SA         ========>
                Judgement (Check *1)


   1. Receive the first message from NUT
      In the first message (1), the initiator generates a proposal it
      considers adequate to protect traffic for the given situation.  The
      Security Association, Proposal, and Transform payloads are included
      in the Security Association payload (for notation purposes).

JUDGEMENT

     The first message Attributes(DES:1) must be included.
     And must conform to above Configuration.

TERMINATION

  Clean up SAD and SPD

REFERENCE

  RFC2409 
  4.Introduction


  (omit)


     IKE implementations MUST support the following attribute values:


      - DES [DES] in CBC mode with a weak, and semi-weak, key check
      (weak and semi-weak keys are referenced in [Sch96] and listed in
      Appendix A). The key is derived according to Appendix B.


      - MD5 [MD5] and SHA [SHA].


      - Authentication via pre-shared keys.


      - MODP over default group number one (see below).


  (omit)

Parameter		Value
ISAKMP	SA Attributes	- DES in CBC mode - MD5 - Authentication via pre-shared keys. - MODP over default group number one.