#!/usr/bin/perl # # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Yokogawa Electric Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $TAHI: ct/ike/SGW/SG_I_RFC3526_2.seq,v 1.23.2.3 2005/11/22 10:06:04 ozoe Exp $ # $Id: SG_I_RFC3526_2.seq,v 1.23.2.3 2005/11/22 10:06:04 ozoe Exp $ # ###################################################################### BEGIN { } use V6evalTool; use IKE; use IKE_check; my $IF0 = Link0; my $IF1 = Link1; #====== get sequence arguments ====== foreach (@ARGV) { /^test_type=(\S+)/ && do {$TEST_TYPE=$1; next; }; /^support=(\S+)/ && do {$SUPPORT=$1; next; }; /^app_type=(\S+)/ && do {$IKE::APP_TYPE=$1; next; }; /^test_phase=(\S+)/ && do {$IKE::TEST_PHASE=$1; next; }; ikeExitError("Unknown sequence option '$_'"); } #====== check NUT type ====== ikeCheckNUT(sgw, $TEST_TYPE, $SUPPORT); #====== Test Configuration ====== %ikeConfig = ( 'app_type' => 'ICMP', 'isakmp_src' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'isakmp_dst' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_dport' => '500', 'isakmp_ex_mode' => 'main', 'isakmp_doi' => 'ipsec_doi', 'isakmp_situation' => 'identity_only', 'isakmp_key_id' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_key_value' => 'IKE-TEST', 'isakmp_enc_alg' => '3des', 'isakmp_hash_alg' => 'sha1', 'isakmp_auth_method' => 'pre_shared_key', 'isakmp_dh_group' => '5', 'isakmp_lt' => '28800', 'isakmp_lt_unit' => 'seconds', 'isakmp_src_id_type' => 'address', 'isakmp_src_id' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'isakmp_dst_id_type' => 'address', 'isakmp_dst_id' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_num_pro' => '1', 'isakmp_num_trans' => '1', 'ipsec_id_type' => 'address', 'ipsec_src' => "$IKE::IKEAddr{IKE_NET0_ADDR}", 'ipsec_dst' => "$IKE::IKEAddr{IKE_NET4_ADDR}", 'ipsec_src_id' => "$IKE::IKEAddr{IKE_NET0_ADDR}", 'ipsec_dst_id' => "$IKE::IKEAddr{IKE_NET4_ADDR}", 'ipsec_tsrc' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'ipsec_tdst' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'ipsec_end_src' => "$IKE::IKEAddr{IKE_TN_NET0_HOST1_ADDR}", 'ipsec_end_dst' => "$IKE::IKEAddr{IKE_TN_NET4_HOST2_ADDR}", 'ipsec_supper' => 'any', 'ipsec_dupper' => 'any', 'ipsec_direction' => 'out', 'ipsec_pfs_group' => 'off', 'ipsec_p_num' => '1', 'ipsec_p1_proto' => 'PROTO_IPSEC_ESP', 'ipsec_p1_t_num' => '1', 'ipsec_p1_t1_enc_alg' => 'ESP_3DES', 'ipsec_p1_t1_auth_mtd' => 'HMAC_SHA', 'ipsec_p1_t1_mode' => 'Tunnel', 'ipsec_p1_t1_lt' => '8', 'ipsec_p1_t1_lt_unit' => 'hour', ); #====== set ISAKMP SA, IPSEC SPD #====== vLogHTML("*** Target IKE initialization phase ***
"); ikeInit(%ikeConfig); #====== set Address of NUT ====== vLogHTML("*** Target initialization phase ***
"); vCapture($IF0); vCapture($IF1); ikeSetAddr($IF0,$IF1,$IKE::address_debug); #====== set ISAKMP SA packet frame, parameter #====== my $cpp = undef; my @ike = (); #====================================================================== vLogHTML("*** Target testing phase ***
"); #------------------------------------------------------------------- vLogHTML("*** Phase-1 1st message recv ***
"); #------------------------------------------------------------------- $IKE::pktdesc{'echo_request_send_net0host1_net4host2'} = 'Send Echo Request from Host-1(TN) to Host-2(TN) via SGW1(NUT)'; my $ret0 = packetSendOnly($IF1, 'echo_request_send_net0host1_net4host2'); if($ret0 == $IKE::FAIL) { ikeReset(); exit($V6evalTool::exitFail); } my @CHECK_FLAG = undef; $CHECK_FLAG[0] = 0; #None my $OPTION_FLAG = $IKE_check::optionHash{'none'}; my %ret = ikePh1Recv('Link0', 10, 0, 0, $cpp, \@ike, \%ikeConfig,\@CHECK_FLAG,$OPTION_FLAG); ##################### # DH Group check ###################### my $atttype = 4; my $attvalue = $ikeConfig{'isakmp_dh_group'}; my $attret = &IKE_check::SpecificAttributeCheckFromSeq(\%ret,$atttype,$attvalue,1); if($attret < 0){ $ret{'status'} = $IKE::FAIL } if($ret{'status'} == $IKE::FAIL) { ikeReset(); exit($V6evalTool::exitFail); } vLogHTML("Transform Payload SA Attributes (DH5) is correct
"); vLogHTML("*** Target test finish ***
"); vStop($IF0); vStop($IF1); ikeReset(); ikeExitPass(); #NOTREACHED ###################################################################### __END__ =head1 NAME SG_I_RFC3526_2 - [Initiator Test] Transform Payload SA Attributes check (DH5) =head1 TARGET SGW =head1 SYNOPSIS =begin html 
  SG_I_RFC3526_2.seq [-tooloption ...] -pkt SG_I_RFC3526_2.def -tooloption : v6eval tool option
  See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
=end html =head1 INITIALIZATION =begin html
  • Network Topology
    •                                  HOST-2(TN)
                                   |3ffe:501:ffff:104::11
                                   |
Net-v   --+------------------------+-------- 3ffe:501:ffff:104::/64
          |
          |
         SGW-2(TN):responder
          |3ffe:501:ffff:103::11
          |                     
Net-w   --+--------+------------------------ 3ffe:501:ffff:103::/64
                   |
                   |
                  ROUTER-2(TN)
                   | 3ffe:501:ffff:102::11
                   |
Net-x   --+--------+------------------------ 3ffe:501:ffff:102::/64
          |
          |3ffe:501:ffff:102::1
         SGW-1(NUT):initiator
          |3ffe:501:ffff:101::1
          |
Net-y   --+--------+------------------------ 3ffe:501:ffff:101::/64
                   |
                   | 3ffe:501:ffff:101::11
                  ROUTER-1(TN)
                   |
                   |
Net-z   -----------+---------------+-------- 3ffe:501:ffff:100::/64
                                   |
                                   |3ffe:501:ffff:100::13
                                 HOST-1(TN)

  • Verification Points
      IKE implementations support the following attribute values
      Parameter Value
      ISAKMP SA Attributes - 3DES in CBC mode
      - SHA
      - Authentication via pre-shared keys.
      - MODP over group number five.
      So, IKE implementations support DH5.

  • Configuration

      •        
    • Initiator and Responder IKE parameter
      • 
(It is shown that the mark of "*" permits anythings as attributes.)
At least, following parameter must be included in proposal.
          
      
          
          
      
            Machine              
            Src              
            Dest              
            Phase I             
            Phase II
          
                   
          
                   
            Ex mode
            Key Value 
            Enc Alg
            Hash Alg           
            Auth Method           
            DH Group           
            PH1 Lt
            IDx
      		
            Proto ID
            Trans ID
            Mode
            Auth Alg 
            PH2 Lt
            IDci
            IDcr
            Upper
          
      
          
      
            SGW-1           
            SGW-1 addr           
            SGW-2 addr           
            Main  
            IKE-TEST                               
            3DES*           
            SHA*           
            pre-shared key*           
            5
            8 Hour            
            SGW-1 addr              
            PROTO_IPSEC_ESP 
            ESP_3DES             
            Tunnel           
            HMAC-SHA  
            8 Hour            
            Net-z addr          
            Net-v addr   
            any            
          
         
          
         
            SGW-2
            SGW-2 addr
            SGW-1 addr
            Main
            IKE-TEST      
            3DES
            SHA
            pre-shared key           
            5           
            8 Hour
            SGW-2 addr    
            PROTO_IPSEC_ESP
            ESP_3DES  
            Tunnel
            HMAC-SHA
            8 Hour 
            Net-z addr          
            Net-v addr   
            any
          
      
                
        
      
          *Ex Mode = Exchange mode
          *IDx = identity payload(FQDN or user FQDN  can also be chosen as IDx)
          *IDci = identity payload
          *IDcr = identity payload
          *Enc Alg = IKE Encryption Algorithm
          *Hash Alg = IKE Authentication Algorithm
          *Key Value = pre-shared key value
          *PH1 Lt = Phase-1 Lifetime
          *PH2 Lt = Phase-2 Lifetime
          *Proto ID = Protocol Identifier
          *Trans ID = Transform Identifier
          *Mode = Encapsulation Mode
          *Auth Alg = Authentication Algorithm
          *Auth Method = Authentication Method
          *DH Group = Diffie-Hellman Group
          *Upper = Upper Layer Protocol
          *SGW-1 addr = SGW-1 address
          *SGW-2 addr = SGW-2 address
          *Net-z = Net-z network address
          *Net-v = Net-v network address

  • Pre-Sequence

    •        In order to start the negotiation of IKE, 
       TN(HOST-1) transmits Echo Request to TN(HOST-2).
=end html =head1 TEST PROCEDURE =begin html 
  This test check is following.


           IDENTITY PROTECTION EXCHANGE


 #   Initiator(NUT)   Direction    Responder(TN)
(1)  HDR; SA         ========>
                Judgement (Check *1)


   1. Receive the first message from NUT
      In the first message (1), the initiator generates a proposal it
      considers adequate to protect traffic for the given situation.  The
      Security Association, Proposal, and Transform payloads are included
      in the Security Association payload (for notation purposes).
=end html =head1 JUDGEMENT The first message Attributes(DH5:5) must be included. And must conform to above Configuration. =head1 TERMINATION Clean up SAD and SPD =head1 REFERENCE =begin html 
  RFC3526
  2.  1536-bit MODP Group


   The 1536 bit MODP group has been used for the implementations for
   quite a long time, but was not defined in RFC 2409 (IKE).
   Implementations have been using group 5 to designate this group, we
   standardize that practice here.


   The prime is: 2^1536 - 2^1472 - 1 + 2^64 * { [2^1406 pi] + 741804 }


   Its hexadecimal value is:


      FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1
      29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD
      EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245
      E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED
      EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE45B3D
      C2007CB8 A163BF05 98DA4836 1C55D39A 69163FA8 FD24CF5F
      83655D23 DCA3AD96 1C62F356 208552BB 9ED52907 7096966D
      670C354E 4ABC9804 F1746C08 CA237327 FFFFFFFF FFFFFFFF


   The generator is: 2.
=end html =head1 SEE ALSO perldoc V6evalTool =begin html 
  IKE.html IKE Test Common Utility
=end html =cut