I_RFC2408_5_4_2_2_SA - [Initiator Test] Check the Situation field to confirm it is supported
End-Node
I_RFC2408_5_4_2_2_SA.seq [-tooloption ...] -pkt I_RFC2408_5_4_2_2_SA.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN):responder
|3ffe:501:ffff:101::11
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
|
ROUTER-1(TN)
|3ffe:501:ffff:100::11
|
Net-z --+--------+------------------------ 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100:XXXX
NUT:initiator
XXXX: EUI64 address
Verification Points
Determine if the given situation can be protected. If the
Situation determination fails, the message is discarded and the
following actions are taken:
(a) The event, INVALID SITUATION, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the SITUATION-NOT-SUPPORTED message type MAY be
sent to the transmitting entity. This action is dictated by
a system security policy.
Configuration
SA Payload Format(HOST-2:Responder)
Situation field : 0x80000000 (invalid value)
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
Upper |
| NUT |
NUT addr |
HOST-2 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
NUT addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
| HOST-2 |
HOST-2 addr |
NUT addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
HOST-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
*Ex Mode = Exchange mode
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*NUT addr = NUT address
*HOST-2 addr = HOST-2 address
Pre-Sequence
In order to start the negotiation of IKE,
NUT transmits Echo Request to TN(HOST-2).
This test check is following.
IDENTITY PROTECTION EXCHANGE
# Initiator(NUT) Direction Responder(TN)
(1) HDR; SA ========>
(2) <======== HDR; SA <-----Situation field : 0x80000000(invalid value)
(3-A)HDR; KE; NONCE ========> X <-----Must not transmit
or
(3-B)HDR; N/D ========>
Judgement (Check *1)
1. Receive the first message from NUT
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
2. Send the second message from TN
In the second message (2), the responder indicates the protection
suite it has accepted with the Security Association, Proposal, and
Transform payloads.
3. Receive the third message from NUT
In the third message (3-B), the initiator indicates either an ISAKMP
Notify Payload or an ISAKMP delete Payload.
The second message must not be accepted. And the third message(3-B) must not be returned
(* or SITUATION-NOT-SUPPORTED message(3-A) is returned).
*option : if you want to check the retruned Notify message.
Clean up SAD and SPD
RFC2408
5.4 Security Association Payload Processing
(omit)
When a Security Association payload is received, the receiving entity
(initiator or responder) MUST do the following:
1. Determine if the Domain of Interpretation (DOI) is supported. If
the DOI determination fails, the message is discarded and the
following actions are taken:
(a) The event, INVALID DOI, MAY be logged in the appropriate
system audit file.
(b) An Informational Exchange with a Notification payload
containing the DOI-NOT-SUPPORTED message type MAY be sent to
the transmitting entity. This action is dictated by a
system security policy.
2. Determine if the given situation can be protected. If the
Situation determination fails, the message is discarded and the
following actions are taken:
(a) The event, INVALID SITUATION, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the SITUATION-NOT-SUPPORTED message type MAY be
sent to the transmitting entity. This action is dictated by
a system security policy.
3. Process the remaining payloads (i.e. Proposal, Transform) of the
Security Association Payload. If the Security Association
Proposal (as described in sections 5.5 and 5.6) is not accepted,
then the following actions are taken:
(a) The event, INVALID PROPOSAL, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the NO-PROPOSAL-CHOSEN message type MAY be sent
to the transmitting entity. This action is dictated by a
system security policy.
perldoc V6evalTool
IKE.html IKE Test Common Utility