#!/usr/bin/perl # # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 Yokogawa Electric Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $TAHI: ct/ike/ENODE/I_RFC2408_5_6_2_1_T.seq,v 1.38.2.2 2005/11/22 10:05:45 ozoe Exp $ # $Id: I_RFC2408_5_6_2_1_T.seq,v 1.38.2.2 2005/11/22 10:05:45 ozoe Exp $ # ###################################################################### BEGIN { } END{ } use V6evalTool; use IKE; use IKE_check; my $IF0 = Link0; #====== get sequence arguments ====== foreach (@ARGV) { /^test_type=(\S+)/ && do {$TEST_TYPE=$1; next; }; /^support=(\S+)/ && do {$SUPPORT=$1; next; }; /^app_type=(\S+)/ && do {$IKE::APP_TYPE=$1; next; }; /^test_phase=(\S+)/ && do {$IKE::TEST_PHASE=$1; next; }; ikeExitError("Unknown sequence option '$_'"); } #====== check NUT type ====== ikeCheckNUT(host, $TEST_TYPE, $SUPPORT); #====== Test Configuration ====== %ikeConfig = ( 'app_type' => 'ICMP', 'isakmp_src' => "$IKE::IKEAddr{IKE_NUT_NET0_HOST1_ADDR}", 'isakmp_dst' => "$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}", 'isakmp_dport' => '500', 'isakmp_ex_mode' => 'main', 'isakmp_doi' => 'ipsec_doi', 'isakmp_situation' => 'identity_only', 'isakmp_key_id' => "$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}", 'isakmp_key_value' => 'IKE-TEST', 'isakmp_enc_alg' => '3des', 'isakmp_hash_alg' => 'sha1', 'isakmp_auth_method' => 'pre_shared_key', 'isakmp_dh_group' => '2', 'isakmp_lt' => '28800', 'isakmp_lt_unit' => 'seconds', 'isakmp_src_id_type' => 'address', 'isakmp_src_id' => "$IKE::IKEAddr{IKE_NUT_NET0_HOST1_ADDR}", 'isakmp_dst_id_type' => 'address', 'isakmp_dst_id' => "$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}", 'isakmp_num_pro' => '1', 'isakmp_num_trans' => '1', 'ipsec_id_type' => 'address', 'ipsec_src' => "$IKE::IKEAddr{IKE_NUT_NET0_HOST1_ADDR}", 'ipsec_dst' => "$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}", 'ipsec_src_id' => "$IKE::IKEAddr{IKE_NUT_NET0_HOST1_ADDR}", 'ipsec_dst_id' => "$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}", 'ipsec_supper' => 'any', 'ipsec_dupper' => 'any', 'ipsec_direction' => 'out', 'ipsec_pfs_group' => 'off', 'ipsec_p_num' => '1', 'ipsec_p1_proto' => 'PROTO_IPSEC_ESP', 'ipsec_p1_t_num' => '1', 'ipsec_p1_t1_enc_alg' => 'ESP_3DES', 'ipsec_p1_t1_auth_mtd' => 'HMAC_SHA', 'ipsec_p1_t1_mode' => 'Transport', 'ipsec_p1_t1_lt' => '8', 'ipsec_p1_t1_lt_unit' => 'hour', ); #====== set TN's cookie and nonce ======== my $cookie = GetMD5("$IKE::IKEAddr{IKE_TN_NET1_HOST2_ADDR}"."$ikeConfig{'isakmp_dport'}".time()); $cookie = substr($cookie, 0, 16); my $nonce = '00000000000000000000000000000000'; $ikeConfig{'isakmp_cookie_r'} = $cookie; $ikeConfig{'isakmp_nonce_r'} = $nonce; vLogHTML("CKY-R: $ikeConfig{'isakmp_cookie_r'}
") if $IKE::remote_debug; vLogHTML("Nr-b: $ikeConfig{'isakmp_nonce_r'}
") if $IKE::remote_debug; vLogHTML("pre_shared key: $ikeConfig{'isakmp_key_value'}
") if $IKE::remote_debug; #====== set ISAKMP SA, IPSEC SPD #====== vLogHTML("*** Target IKE initialization phase ***
"); ikeInit(%ikeConfig); #====== set Address of NUT ====== vLogHTML("*** Target initialization phase ***
"); vCapture($IF0); ikeSetAddr($IF0); #====== set ISAKMP SA packet frame, parameter #====== my $cpp = undef; my @ike = (); #====================================================================== vLogHTML("*** Target testing phase ***
"); vClear($IF0); #------------------------------------------------------------------- vLogHTML("*** Phase-1 1st message recv ***
"); #------------------------------------------------------------------- my $ret3 = ikeSend2TN($IF0, 5, 0, 2, 1, \%ikeConfig); if($ret3 == $IKE::FAIL) { ikeRemoteAsyncWait(); ikeReset(); exit($V6evalTool::exitFail); } my @CHECK_FLAG = undef; $CHECK_FLAG[0] = 0; my $OPTION_FLAG = $IKE_check::optionHash{'none'}; my %ret = ikePh1Recv('Link0', 10, 0, 0, $cpp, \@ike, \%ikeConfig,\@CHECK_FLAG,$OPTION_FLAG); if($ret{'status'} == $IKE::FAIL) { ikeRemoteAsyncWait(); ikeReset(); exit($V6evalTool::exitFail); } #------------------------------------------------------------------- vLogHTML("*** Phase-1 2nd message send ***
"); #------------------------------------------------------------------- vClear($IF0); $cpp=' -DINVALID_PHASE1_SEND_2ND_TRANSFORM '; %ret2 = ikePh1Send2nd($IF0, 5, 0, 0, $cpp, \@ike, \%ret, \%ikeConfig); if($ret2{'status'} == $IKE::FAIL) { ikeRemoteAsyncWait(); ikeReset(); exit($V6evalTool::exitFail); } if($IKE::NOTIFY_CHECK eq undef){ #------------------------------------------------------------------- vLogHTML("*** Phase-1 3rd message recv ***
"); #------------------------------------------------------------------- @CHECK_FLAG = undef; $CHECK_FLAG[0] = shiftFlag(4) + shiftFlag(10); #KE Nonce $OPTION_FLAG = $IKE_check::optionHash{'none'}; %ret = ikePh1Recv3rd($IF0, 5, 0, 0, $cpp, \@ike, \%ret2, \%ikeConfig,\@CHECK_FLAG,$OPTION_FLAG); if($ret{'status'} == $IKE::PASS) { vLogHTML(''); vLogHTML("NG:Phase-1 3rd message is returned.
"); vLogHTML(''); ikeRemoteAsyncWait(); ikeReset(); exit($V6evalTool::exitFail); }else{ vLogHTML(''); vLogHTML("OK:Phase-1 3rd message is not returned.
"); vLogHTML(''); } }else { #------------------------------------------------------------------- vLogHTML("*** Phase-1 Notify recv ***
"); #------------------------------------------------------------------- my @notifyMessageID=($IKE::notify_messages{'INVALID-TRANSFORM-ID'}); my $encryptiontype= '1'; $cpp=$ikeConfig{'cpp_phase1_recv_1st'}; %pktdesc = ( %pktdesc, 'isakmp_phase1_recv' => 'Recv 1st message from HOST1(NUT)' ); @ike = ( @ike, 'isakmp_phase1_recv' ); %ret = ikeRecvNotify($IF0, 5, 0, 1, $cpp, \@ike, \%ret2, \%ikeConfig,\@notifyMessageID,$encryptiontype); if($ret{'status'} >= 2) { ikeRemoteAsyncWait(); ikeReset(); exit($V6evalTool::exitFail); } } #------------------------------------------------------------------- vLogHTML("Check the Transform-ID field to confirm it is valid is correct
"); #------------------------------------------------------------------- #====================================================================== vLogHTML("*** Target test finish ***
"); #====================================================================== vStop($IF0); ikeRemoteAsyncWait(); ikeReset(); ikeExitPass(); #NOTREACHED ###################################################################### __END__ =head1 NAME I_RFC2408_5_6_2_1_T - [Initiator Test] Check the Transform-ID field to confirm it is valid =head1 TARGET End-Node =head1 SYNOPSIS =begin html 
  I_RFC2408_5_6_2_1_T.seq [-tooloption ...] -pkt I_RFC2408_5_6_2_1_T.def -tooloption : v6eval tool option
  See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
=end html =head1 INITIALIZATION =begin html
  • Network Topology
    •         HOST-2(TN):responder
          |3ffe:501:ffff:101::11
          |                        
Net-y   --+--------+------------------------ 3ffe:501:ffff:101::/64
                   |
                   |
                 ROUTER-1(TN)
                   |3ffe:501:ffff:100::11
                   |
Net-z   --+--------+------------------------ 3ffe:501:ffff:100::/64
          |
          |3ffe:501:ffff:100:XXXX
        NUT:initiator
  
    
  XXXX: EUI64 address

  • Verification Points

           Determine if the Transform is supported.  If the Transform-ID
       field contains an unknown or unsupported value, then that
       Transform payload MUST be ignored and MUST NOT cause the
       generation of an INVALID TRANSFORM event.  If the Transform-ID
       field is invalid, the payload is discarded and the following
       actions are taken:
    
       (a)  The event, INVALID TRANSFORM, MAY be logged in the
            appropriate system audit file.
    
       (b)  An Informational Exchange with a Notification payload
            containing the INVALID-TRANSFORM-ID message type MAY be sent
            to the transmitting entity.  This action is dictated by a
            system security policy.

  • Configuration

      •        
    • Transform Payload Format(HOST-2:Responder)
      • 
          Transform-ID field : 248(invalid value)
       
    • Initiator and Responder IKE parameter
      • 
At least, following parameter must be included in proposal.
          
      
          
          
      
            Machine              
            Src              
            Dest              
            Phase I             
            Phase II             
          
                   
          
                   
            Ex mode
            Key Value 
            Enc Alg
            Hash Alg           
            Auth Method           
            DH Group           
            PH1 Lt
            IDx
      		
            Proto ID
            Trans ID
            Mode
            Auth Alg
            PH2 Lt
            Upper
          
      
          
      
            NUT           
            NUT addr           
            HOST-2 addr           
            Main  
            IKE-TEST                               
            3DES           
            SHA           
            pre-shared key           
            2           
            8 Hour            
            NUT addr              
            PROTO_IPSEC_ESP  
            ESP_3DES           
            Transport            
            HMAC-SHA 
            8 Hour            
            any            
          
         
          
         
            HOST-2
            HOST-2 addr
            NUT addr
            Main
            IKE-TEST      
            3DES
            SHA
            pre-shared key           
            2           
            8 Hour
            HOST-2 addr    
            PROTO_IPSEC_ESP 
            ESP_3DES 
            Transport
            HMAC-SHA
            8 Hour  
            any
          
      
                
        
      
          *Ex Mode = Exchange mode
          *IDx = identity payload(FQDN or user FQDN  can also be chosen as IDx)
          *Enc Alg = IKE Encryption Algorithm
          *Hash Alg = IKE Authentication Algorithm
          *Key Value = pre-shared key value
          *PH1 Lt = Phase-1 Lifetime
          *PH2 Lt = Phase-2 Lifetime
          *Proto ID = Protocol Identifier
          *Trans ID = Transform Identifier
          *Mode = Encapsulation Mode
          *Auth Alg = Authentication Algorithm
          *Auth Method = Authentication Method
          *DH Group = Diffie-Hellman Group
          *Upper = Upper Layer Protocol
          *NUT addr = NUT address
          *HOST-2 addr = HOST-2 address

  • Pre-Sequence

    •        In order to start the negotiation of IKE, 
       NUT transmits Echo Request to TN(HOST-2).
=end html =head1 TEST PROCEDURE =begin html 
  This test check is following.


           IDENTITY PROTECTION EXCHANGE


 #   Initiator(NUT)   Direction    Responder(TN)
(1)  HDR; SA         ========>


(2)                  <========       HDR; SA     <-----Transform-ID field : 248(invalid value)


(3-A)HDR; KE; NONCE  ========> X                 <-----Must not transmit
         or
(3-B)HDR; N/D        ========>      
                Judgement (Check *1)


   1. Receive the first message from NUT
      In the first message (1), the initiator generates a proposal it
      considers adequate to protect traffic for the given situation.  The
      Security Association, Proposal, and Transform payloads are included
      in the Security Association payload (for notation purposes).


   2. Send the second message from TN
      In the second message (2), the responder indicates the protection
      suite it has accepted with the Security Association, Proposal, and
      Transform payloads. 


   3. Receive the third message from NUT
      In the third message (3-B), the initiator indicates either an ISAKMP
      Notify Payload or an ISAKMP delete Payload.
=end html =head1 JUDGEMENT The second message must not be accepted. And the third message(3-A) must not be returned (* or INVALID-TRANSFORM-ID message(3-B) is returned). *option : if you want to check the retruned Notify message. =head1 TERMINATION Clean up SAD and SPD =head1 REFERENCE =begin html 
  RFC2408
  5.6 Transform Payload Processing


(omit)


   When a Transform payload is received, the receiving entity (initiator
   or responder) MUST do the following:


   1.  Determine if the Transform is supported.  If the Transform-ID
       field contains an unknown or unsupported value, then that
       Transform payload MUST be ignored and MUST NOT cause the
       generation of an INVALID TRANSFORM event.  If the Transform-ID
       field is invalid, the payload is discarded and the following
       actions are taken:


       (a)  The event, INVALID TRANSFORM, MAY be logged in the
            appropriate system audit file.


       (b)  An Informational Exchange with a Notification payload
            containing the INVALID-TRANSFORM-ID message type MAY be sent
            to the transmitting entity.  This action is dictated by a
            system security policy.


   2.  Ensure the Transforms are presented according to the details
       given in section 3.6 and 4.2.  If the transforms are not formed
       correctly, the following actions are taken:


       (a)  Possible events, BAD PROPOSAL SYNTAX, INVALID TRANSFORM,
            INVALID ATTRIBUTES, are logged in the appropriate system
            audit file.


       (b)  An Informational Exchange with a Notification payload
            containing the BAD-PROPOSAL-SYNTAX, PAYLOAD-MALFORMED or
            ATTRIBUTES-NOT-SUPPORTED message type MAY be sent to the
            transmitting entity.  This action is dictated by a system
            security policy.


   3.  Process the subsequent Transform and Proposal payloads as defined
       by the Next Payload field.  Examples of processing these payloads
       are given in section 4.2.1.
=end html =head1 SEE ALSO perldoc V6evalTool =begin html 
  IKE.html IKE Test Common Utility
=end html =cut