I_RFC2409_5_15 - [Initiator Test] Nonce Payload Format check
End-Node
I_RFC2409_5_15.seq [-tooloption ...] -pkt I_RFC2409_5_15.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN):responder
|3ffe:501:ffff:101::11
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
|
ROUTER-1(TN)
|3ffe:501:ffff:100::11
|
Net-z --+--------+------------------------ 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100:XXXX
NUT:initiator
XXXX: EUI64 address
Verification Points
Nonce Payload Format
Next Payload field
Place the value of the Next Payload in the Next Payload field.
RESERVED Fields
All RESERVED fields in the ISAKMP protocol MUST be set to zero (0).
Place the value zero (0) in the RESERVED field.
Payload Length field
Place the length (in octets) of the payload in the Payload Length
field.
Nonce Data field
The length of nonce payload MUST be between 8 and 256 bytes inclusive.
Configuration
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
Upper |
| NUT |
NUT addr |
HOST-2 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
NUT addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
| HOST-2 |
HOST-2 addr |
NUT addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
HOST-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
*Ex Mode = Exchange mode
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*NUT addr = NUT address
*HOST-2 addr = HOST-2 address
Pre-Sequence
In order to start the negotiation of IKE,
NUT transmits Echo Request to TN(HOST-2).
This test check is following.
IDENTITY PROTECTION EXCHANGE
# Initiator(NUT) Direction Responder(TN)
(1) HDR; SA ========>
(2) <======== HDR; SA
(3) HDR; KE; NONCE ========>
Judgement (Check *1)
1. Receive the first message from NUT
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
2. Send the second message from TN
In the second message (2), the responder indicates the protection
suite it has accepted with the Security Association, Proposal, and
Transform payloads.
3. Receive the third message from NUT
In the third (3) message, the initiator send keying material
used to arrive at a common shared secret and random information
which is used to guarantee liveness and protect against replay attacks.
The first and the second message must be exchanged correctly.
The third message's Nonce Payload Format must be base
on description of RFC(see above Verification Points).
And must conform to above Configuration.
Clean up SAD and SPD
RFC2408
5.3 Generic Payload Header Processing
When creating any of the ISAKMP Payloads described in sections 3.4
through 3.15 a Generic Payload Header is placed at the beginning of
these payloads. When creating the Generic Payload Header, the
transmitting entity (initiator or responder) MUST do the following:
1. Place the value of the Next Payload in the Next Payload field.
These values are described in section 3.1.
2. Place the value zero (0) in the RESERVED field.
3. Place the length (in octets) of the payload in the Payload Length
field.
4. Construct the payloads as defined in the remainder of this
section.
(omit)
5.13 Nonce Payload Processing
When creating a Nonce Payload, the transmitting entity (initiator or
responder) MUST do the following:
1. Create a unique random value to be used as a nonce.
2. Construct a Nonce payload.
3. Transmit the message to the receiving entity as described in
section 5.1.
(omit)
RFC2409
5. Exchanges
(omit)
The length of nonce payload MUST be between 8 and 256 bytes
inclusive.
(omit)
perldoc V6evalTool
IKE.html IKE Test Common Utility