R_RFC2409_3_2_3 - [Responder Test]Encryption of ISAKMP payload
End-Node
R_RFC2409_3_2_3.seq [-tooloption ...] -pkt R_RFC2409_3_2_3.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN):initiator
|3ffe:501:ffff:101::11
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
|
ROUTER-1(TN)
|3ffe:501:ffff:100::11
|
Net-z --+--------+------------------------ 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100:XXXX
NUT:responder
XXXX: EUI64 address
Verification Points
When communication is protected, all payloads following the ISAKMP
header MUST be encrypted.
Configuration
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
Upper |
| NUT |
NUT addr |
HOST-2 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
NUT addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
| HOST-2 |
HOST-2 addr |
NUT addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
HOST-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Transport |
HMAC-SHA |
8 Hour |
any |
*Ex Mode = Exchange mode
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*NUT addr = NUT address
*HOST-2 addr = HOST-2 address
This test check is following.
IDENTITY PROTECTION EXCHANGE
# Initiator(TN) Direction Responder(NUT)
(1) HDR; SA ========>
(2) <======== HDR; SA
(3) HDR; KE; NONCE ========>
(4) <======== HDR; KE; NONCE
(5) HDR*; IDii; HASH_I ========>
(6) <======== HDR*; IDir; HASH_R
Judgement (Check *1)
1. Send the first message from TN
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
2. Receive the second message from NUT
In the second message (2), the responder indicates the protection
suite it has accepted with the Security Association, Proposal, and
Transform payloads.
3. Send the third message from TN
In the third (3) message, the initiator send keying material
used to arrive at a common shared secret and random information
which is used to guarantee liveness and protect against replay attacks.
4. Receive the fourth message from NUT
In the fourth (4) message, the responder send keying material
used to arrive at a common shared secret and random information
which is used to guarantee liveness and protect against replay attacks.
5. Send the fifth message from TN
In the fifth (5) message, the initiator send identification
information and the results of the agreed upon authentication
function(hash function).
6. Receive the sixth message from NUT
In the sixth (6) message, the responder send identification
information and the results of the agreed upon authentication
function(hash function).
The first to the fourth message must be exchanged correctly.
The fifth message must be accepted.
And the sixth message must be encrypted and returned.
And must conform to above Configuration.
Clean up SAD and SPD
RFC2408
3.1 ISAKMP Header Format
(omit)
o Flags (1 octet) - indicates specific options that are set for the
ISAKMP exchange. The flags listed below are specified in the
Flags field beginning with the least significant bit, i.e the
Encryption bit is bit 0 of the Flags field, the Commit bit is bit
1 of the Flags field, and the Authentication Only bit is bit 2 of
the Flags field. The remaining bits of the Flags field MUST be
set to 0 prior to transmission.
-- E(ncryption Bit) (1 bit) - If set (1), all payloads following
the header are encrypted using the encryption algorithm
identified in the ISAKMP SA. The ISAKMP SA Identifier is the
combination of the initiator and responder cookie. It is
RECOMMENDED that encryption of communications be done as soon
as possible between the peers. For all ISAKMP exchanges
described in section 4.1, the encryption SHOULD begin after
both parties have exchanged Key Exchange payloads. If the
E(ncryption Bit) is not set (0), the payloads are not
encrypted.
(omit)
RFC2409
3.2 Notation
(omit)
Message encryption (when noted by a '*' after the ISAKMP header) MUST
begin immediately after the ISAKMP header. When communication is
protected, all payloads following the ISAKMP header MUST be
encrypted. Encryption keys are generated from SKEYID_e in a manner
that is defined for each algorithm.
perldoc V6evalTool
IKE.html IKE Test Common Utility