SG_I_A_RFC2409_5 - [Initiator Test] Position of payload
SGW
SG_I_A_RFC2409_5.seq [-tooloption ...] -pkt SG_I_A_RFC2409_5.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN)
|3ffe:501:ffff:104::11
|
Net-v --+------------------------+-------- 3ffe:501:ffff:104::/64
|
|
SGW-2(TN):responder
|3ffe:501:ffff:103::11
|
Net-w --+--------+------------------------ 3ffe:501:ffff:103::/64
|
|
ROUTER-2(TN)
| 3ffe:501:ffff:102::11
|
Net-x --+--------+------------------------ 3ffe:501:ffff:102::/64
|
|3ffe:501:ffff:102::1
SGW-1(NUT):initiator
|3ffe:501:ffff:101::1
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
| 3ffe:501:ffff:101::11
ROUTER-1(TN)
|
|
Net-z -----------+---------------+-------- 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100::13
HOST-1(TN)
Verification Points
The SA payload MUST precede all other payloads in a phase 1 exchange.
Configuration
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
IDci |
IDcr |
Upper |
| SGW-1 |
SGW-1 addr |
SGW-2 addr |
Aggressive |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
SGW-1 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Tunnel |
HMAC-SHA |
8 Hour |
Net-z addr |
Net-v addr |
any |
| SGW-2 |
SGW-2 addr |
SGW-1 addr |
Aggressive |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
SGW-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Tunnel |
HMAC-SHA |
8 Hour |
Net-z addr |
Net-v addr |
any |
*Ex Mode = Exchange mode
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*IDci = identity payload
*IDcr = identity payload
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*SGW-1 addr = SGW-1 address
*SGW-2 addr = SGW-2 address
*Net-z = Net-z network address
*Net-v = Net-v network address
Pre-Sequence
In order to start the negotiation of IKE,
NUT transmits Echo Request to TN(HOST-2).
This test check is following.
AGGRESSIVE EXCHANGE
# Initiator(NUT) Direction Responder(TN)
(1) HDR; SA, KE, Ni, IDii ========>
Judgement (Check *1)
1. Receive the first message from NUT
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
Keying material used to arrive at a common shared secret and random
information which is used to guarantee liveness and protect against
replay attacks are also transmitted. Additionally, the initiator
transmits identification information.
The first message which has correct position of payload must be received
(The SA payload MUST precede all other payloads).
And must conform to above Configuration.
Clean up SAD and SPD
RFC2409
(omit)
The SA payload MUST precede all other payloads in a phase 1 exchange.
Except where otherwise noted, there are no requirements for ISAKMP
payloads in any message to be in any particular order.
(omit)
perldoc V6evalTool
IKE.html IKE Test Common Utility