#!/usr/bin/perl # # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 Yokogawa Electric Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $TAHI: ct/ike/SGW/SG_R_A_RFC2408_5_6_2_2_T.seq,v 1.12.2.2 2005/11/22 10:06:05 ozoe Exp $ # $Id: SG_R_A_RFC2408_5_6_2_2_T.seq,v 1.12.2.2 2005/11/22 10:06:05 ozoe Exp $ # ###################################################################### BEGIN { } use V6evalTool; use IKE; use IKE_check; my $IF1 = Link1; my $IF0 = Link0; #====== get sequence arguments ====== foreach (@ARGV) { /^test_type=(\S+)/ && do {$TEST_TYPE=$1; next; }; /^support=(\S+)/ && do {$SUPPORT=$1; next; }; /^app_type=(\S+)/ && do {$IKE::APP_TYPE=$1; next; }; /^test_phase=(\S+)/ && do {$IKE::TEST_PHASE=$1; next; }; ikeExitError("Unknown sequence option '$_'"); } #====== check NUT type ====== ikeCheckNUT(sgw, $TEST_TYPE, $SUPPORT); #====== Test Configuration ====== %ikeConfig = ( 'app_type' => 'ICMP', 'isakmp_src' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'isakmp_dst' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_dport' => '500', 'isakmp_ex_mode' => 'aggressive', 'isakmp_doi' => 'ipsec_doi', 'isakmp_situation' => 'identity_only', 'isakmp_key_id' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_key_value' => 'IKE-TEST', 'isakmp_enc_alg' => '3des', 'isakmp_hash_alg' => 'sha1', 'isakmp_auth_method' => 'pre_shared_key', 'isakmp_dh_group' => '2', 'isakmp_lt' => '28800', 'isakmp_lt_unit' => 'seconds', 'isakmp_src_id_type' => 'address', 'isakmp_src_id' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'isakmp_dst_id_type' => 'address', 'isakmp_dst_id' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'isakmp_num_pro' => '1', 'isakmp_num_trans' => '1', 'ipsec_id_type' => 'address', 'ipsec_dst' => "$IKE::IKEAddr{IKE_NET4_ADDR}", 'ipsec_src' => "$IKE::IKEAddr{IKE_NET0_ADDR}", 'ipsec_dst_id' => "$IKE::IKEAddr{IKE_NET4_ADDR}", 'ipsec_src_id' => "$IKE::IKEAddr{IKE_NET0_ADDR}", 'ipsec_tdst' => "$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}", 'ipsec_tsrc' => "$IKE::IKEAddr{IKE_NUT_NET2_SGW1_ADDR}", 'ipsec_end_dst' => "$IKE::IKEAddr{IKE_TN_NET4_HOST2_ADDR}", 'ipsec_end_src' => "$IKE::IKEAddr{IKE_TN_NET0_HOST1_ADDR}", 'ipsec_supper' => 'any', 'ipsec_dupper' => 'any', 'ipsec_direction' => 'in', 'ipsec_pfs_group' => 'off', 'ipsec_p_num' => '1', 'ipsec_p1_proto' => 'PROTO_IPSEC_ESP', 'ipsec_p1_t_num' => '1', 'ipsec_p1_t1_enc_alg' => 'ESP_3DES', 'ipsec_p1_t1_auth_mtd' => 'HMAC_SHA', 'ipsec_p1_t1_mode' => 'Tunnel', 'ipsec_p1_t1_lt' => '8', 'ipsec_p1_t1_lt_unit' => 'hour', ); #====== set TN's cookie ======== my $cookie = GetMD5("$IKE::IKEAddr{IKE_TN_NET3_SGW2_ADDR}"."$ikeConfig{'isakmp_dport'}".time()); $cookie = substr($cookie, 0, 16); my $nonce = '00000000000000000000000000000000'; $ikeConfig{'isakmp_cookie_i'} = $cookie; $ikeConfig{'isakmp_nonce_i'} = $nonce; #====== set ISAKMP SA, IPSEC SPD #====== vLogHTML("*** Target IKE initialization phase ***
"); ikeInit(%ikeConfig); #====== set Address of NUT ====== vLogHTML("*** Target initialization phase ***
"); vCapture($IF0); vCapture($IF1); ikeSetAddr($IF0,$IF1,$IKE::address_debug); #====== set ISAKMP SA packet frame, parameter #====== my $cpp = undef; my @ike = (); #====================================================================== vLogHTML("*** Target testing phase ***
"); #====================================================================== #------------------------------------------------------------------- vLogHTML("*** Phase-1 1st message send ***
"); #------------------------------------------------------------------- vClear($IF1); vClear($IF0); $cpp = '-DINVALID_PHASE1_SEND_1ST_TRANSFORM '; my %ret = ikePh1Send1st_agg($IF0, 5, 0, 0, $cpp, \@ike, \%ikeConfig); if($ret{'status'} == $IKE::FAIL) { ikeReset(); exit($V6evalTool::exitFail); } if($IKE::NOTIFY_CHECK eq undef){ #------------------------------------------------------------------- vLogHTML("*** Phase-1 2nd message receive ***
"); #------------------------------------------------------------------- my @CHECK_FLAG = undef; $CHECK_FLAG[0] = shiftFlag(1) + #SA shiftFlag(2) + #P shiftFlag(3) + #T shiftFlag(4) + #KE shiftFlag(10)+ #nonce shiftFlag(5) + #ID shiftFlag(8); #hash; my $OPTION_FLAG = $IKE_check::optionHash{'none'}; my %ret2 = ikePh1Recv2nd_agg($IF0, 5, 0, 0, $cpp, \@ike, \%ret, \%ikeConfig,\@CHECK_FLAG,$OPTION_FLAG); if($ret2{'status'} == $IKE::PASS) { vLogHTML(''); vLogHTML("NG:Phase-1 2nd message is returned.
"); vLogHTML(''); ikeReset(); exit($V6evalTool::exitFail); }else{ vLogHTML(''); vLogHTML("OK:Phase-1 2nd message is not returned.
"); vLogHTML(''); } }else{ #------------------------------------------------------------------- vLogHTML("*** Phase-1 Notify recv ***
"); #------------------------------------------------------------------- my @notifyMessageID=($IKE::notify_messages{'BAD-PROPOSAL-SYNTAX'}, $IKE::notify_messages{'PAYLOAD-MALFORMED'}, $IKE::notify_messages{'ATTRIBUTES-NOT-SUPPORTED'},); my $encryptiontype= '2'; my %ret1 = ikeRecvNotify($IF0, 5, 0, 1, $cpp, \@ike, \%ret, \%ikeConfig,\@notifyMessageID,$encryptiontype); if($ret1{'status'} >= 2) { ikeReset(); exit($V6evalTool::exitFail); } } #------------------------------------------------------------------- vLogHTML("Check the Transform to confirm it is valid is PASS
"); #------------------------------------------------------------------- #====================================================================== vLogHTML("*** Target test finish ***
"); #====================================================================== vStop($IF1); vStop($IF0); ikeReset(); ikeExitPass(); #NOTREACHED ###################################################################### __END__ =head1 NAME SG_R_A_RFC2408_5_6_2_2_T - [Responder Test] Check the Transform to confirm it is valid =head1 TARGET SGW =head1 SYNOPSIS =begin html 
  SG_R_A_RFC2408_5_6_2_2_T.seq [-tooloption ...] -pkt SG_R_A_RFC2408_5_6_2_2_T.def -tooloption : v6eval tool option
  See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
=end html =head1 INITIALIZATION =begin html
  • Network Topology
    •                                  HOST-2(TN)
                                   |3ffe:501:ffff:104::11
                                   |
Net-v   --+------------------------+-------- 3ffe:501:ffff:104::/64
          |
          |
         SGW-2(TN):initiator
          |3ffe:501:ffff:103::11
          |                     
Net-w   --+--------+------------------------ 3ffe:501:ffff:103::/64
                   |
                   |
                  ROUTER-2(TN)
                   | 3ffe:501:ffff:102::11
                   |
Net-x   --+--------+------------------------ 3ffe:501:ffff:102::/64
          |
          |3ffe:501:ffff:102::1
         SGW-1(NUT):responder
          |3ffe:501:ffff:101::1
          |
Net-y   --+--------+------------------------ 3ffe:501:ffff:101::/64
                   |
                   | 3ffe:501:ffff:101::11
                  ROUTER-1(TN)
                   |
                   |
Net-z   -----------+---------------+-------- 3ffe:501:ffff:100::/64
                                   |
                                   |3ffe:501:ffff:100::13
                                 HOST-1(TN)

  • Verification Points

           Ensure the Transforms are presented according to the details
       given in section 3.6 and 4.2.  If the transforms are not formed
       correctly, the following actions are taken:
    
       (a)  Possible events, BAD PROPOSAL SYNTAX, INVALID TRANSFORM,
            INVALID ATTRIBUTES, are logged in the appropriate system
            audit file.
    
       (b)  An Informational Exchange with a Notification payload
            containing the BAD-PROPOSAL-SYNTAX, PAYLOAD-MALFORMED or
            ATTRIBUTES-NOT-SUPPORTED message type MAY be sent to the
            transmitting entity.  This action is dictated by a system
            security policy.

  • Configuration

      •        
    • Transform Payload Format(HOST-2:Initiator)
      • 
          SA Attributes field : not set (see below)
       
    • Initiator and Responder IKE parameter
      • 
At least, following parameter must be included in proposal.
          
      
          
          
      
            Machine              
            Src              
            Dest              
            Phase I             
            Phase II
          
                   
          
                   
            Ex mode
            Key Value 
            Enc Alg
            Hash Alg           
            Auth Method           
            DH Group           
            PH1 Lt
            IDx
      		
            Proto ID
            Trans ID
            Mode
            Auth Alg
            PH2 Lt
            IDci
            IDcr
            Upper
          
      
          
      
            SGW-1           
            SGW-1 addr           
            SGW-2 addr           
            Aggressive  
            IKE-TEST                               
            3DES           
            SHA           
            pre-shared key           
            2           
            8 Hour            
            SGW-1 addr              
            PROTO_IPSEC_ESP  
            ESP_3DES           
            Tunnel           
            HMAC-SHA 
            8 Hour            
            Net-v addr          
            Net-z addr   
            any            
          
         
          
         
            SGW-2
            SGW-2 addr
            SGW-1 addr
            Aggressive
            IKE-TEST      
             
             
                        
                        
             
            SGW-2 addr    
            PROTO_IPSEC_ESP 
            ESP_3DES 
            Tunnel
            HMAC-SHA
            8 Hour  
            Net-v addr          
            Net-z addr   
            any
          
      
                
          
      
          *Ex Mode = Exchange mode
          *IDx = identity payload(FQDN or user FQDN  can also be chosen as IDx)
          *IDci = identity payload
          *IDcr = identity payload
          *Enc Alg = IKE Encryption Algorithm
          *Hash Alg = IKE Authentication Algorithm
          *Key Value = pre-shared key value
          *PH1 Lt = Phase-1 Lifetime
          *PH2 Lt = Phase-2 Lifetime
          *Proto ID = Protocol Identifier
          *Trans ID = Transform Identifier
          *Mode = Encapsulation Mode
          *Auth Alg = Authentication Algorithm
          *Auth Method = Authentication Method
          *DH Group = Diffie-Hellman Group
          *Upper = Upper Layer Protocol
          *SGW-1 addr = SGW-1 address
          *SGW-2 addr = SGW-2 address
          *Net-z = Net-z network address
          *Net-v = Net-v network address
=end html =head1 TEST PROCEDURE =begin html 
  This test check is following.


                       AGGRESSIVE EXCHANGE


 #   Initiator(TN)         Direction      Responder(NUT)
(1)  HDR; SA, KE, Ni, IDii ========>                                     <-----SA Attributes field : not set(invalid)


(2-A)                    X <========       HDR; SA, KE, Nr, IDir, HASH_R <-----Must not transmit
                                       or
(2-B)                      <========       HDR; N/D
                        Judgement (Check *1)


   1. Send the first message from TN
      In the first message (1), the initiator generates a proposal it
      considers adequate to protect traffic for the given situation.  The
      Security Association, Proposal, and Transform payloads are included
      in the Security Association payload (for notation purposes).
      Keying material used to arrive at a common shared secret and random 
      information which is used to guarantee liveness and protect against 
      replay attacks are also transmitted. Additionally, the initiator 
      transmits identification information.


   2. Receive the second message from NUT
      In the second message (2-B), the responder indicates either an ISAKMP
      Notify Payload or an ISAKMP delete Payload.
=end html =head1 JUDGEMENT The first message must not be accepted. And the second message(2-A) must not be returned (* or BAD-PROPOSAL-SYNTAX, PAYLOAD-MALFORMED or ATTRIBUTES-NOT-SUPPORTED message(2-B) is returned). *option : if you want to check the retruned Notify message. =head1 TERMINATION Clean up SAD and SPD =head1 REFERENCE =begin html 
  RFC2408
  5.6 Transform Payload Processing


(omit)


   When a Transform payload is received, the receiving entity (initiator
   or responder) MUST do the following:


   1.  Determine if the Transform is supported.  If the Transform-ID
       field contains an unknown or unsupported value, then that
       Transform payload MUST be ignored and MUST NOT cause the
       generation of an INVALID TRANSFORM event.  If the Transform-ID
       field is invalid, the payload is discarded and the following
       actions are taken:


       (a)  The event, INVALID TRANSFORM, MAY be logged in the
            appropriate system audit file.


       (b)  An Informational Exchange with a Notification payload
            containing the INVALID-TRANSFORM-ID message type MAY be sent
            to the transmitting entity.  This action is dictated by a
            system security policy.


   2.  Ensure the Transforms are presented according to the details
       given in section 3.6 and 4.2.  If the transforms are not formed
       correctly, the following actions are taken:


       (a)  Possible events, BAD PROPOSAL SYNTAX, INVALID TRANSFORM,
            INVALID ATTRIBUTES, are logged in the appropriate system
            audit file.


       (b)  An Informational Exchange with a Notification payload
            containing the BAD-PROPOSAL-SYNTAX, PAYLOAD-MALFORMED or
            ATTRIBUTES-NOT-SUPPORTED message type MAY be sent to the
            transmitting entity.  This action is dictated by a system
            security policy.


   3.  Process the subsequent Transform and Proposal payloads as defined
       by the Next Payload field.  Examples of processing these payloads
       are given in section 4.2.1.
=end html =head1 SEE ALSO perldoc V6evalTool =begin html 
  IKE.html IKE Test Common Utility
=end html =cut