SG_R_RFC2408_5_6_2_1_T - [Responder Test] Check the Transform-ID field to confirm it is valid
SGW
SG_R_RFC2408_5_6_2_1_T.seq [-tooloption ...] -pkt SG_R_RFC2408_5_6_2_1_T.def -tooloption : v6eval tool option
See also ike_common.def and ike_ipsec.def and ike_addr.def and ike_pkt_ph1_recv.def and ike_pkt_ph2_recv.def
HOST-2(TN)
|3ffe:501:ffff:104::11
|
Net-v --+------------------------+-------- 3ffe:501:ffff:104::/64
|
|
SGW-2(TN):initiator
|3ffe:501:ffff:103::11
|
Net-w --+--------+------------------------ 3ffe:501:ffff:103::/64
|
|
ROUTER-2(TN)
| 3ffe:501:ffff:102::11
|
Net-x --+--------+------------------------ 3ffe:501:ffff:102::/64
|
|3ffe:501:ffff:102::1
SGW-1(NUT):responder
|3ffe:501:ffff:101::1
|
Net-y --+--------+------------------------ 3ffe:501:ffff:101::/64
|
| 3ffe:501:ffff:101::11
ROUTER-1(TN)
|
|
Net-z -----------+---------------+-------- 3ffe:501:ffff:100::/64
|
|3ffe:501:ffff:100::13
HOST-1(TN)
Verification Points
Determine if the Transform is supported. If the Transform-ID
field contains an unknown or unsupported value, then that
Transform payload MUST be ignored and MUST NOT cause the
generation of an INVALID TRANSFORM event. If the Transform-ID
field is invalid, the payload is discarded and the following
actions are taken:
(a) The event, INVALID TRANSFORM, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the INVALID-TRANSFORM-ID message type MAY be sent
to the transmitting entity. This action is dictated by a
system security policy.
Configuration
Transform Payload Format(HOST-2:Initiator)
Transform-ID field : 248 (invalid value)
Initiator and Responder IKE parameter
At least, following parameter must be included in proposal.
| Machine |
Src |
Dest |
Phase I |
Phase II |
| Ex mode |
Key Value |
Enc Alg |
Hash Alg |
Auth Method |
DH Group |
PH1 Lt |
IDx |
Proto ID |
Trans ID |
Mode |
Auth Alg |
PH2 Lt |
IDci |
IDcr |
Upper |
| SGW-1 |
SGW-1 addr |
SGW-2 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
SGW-1 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Tunnel |
HMAC-SHA |
8 Hour |
Net-v addr |
Net-z addr |
any |
| SGW-2 |
SGW-2 addr |
SGW-1 addr |
Main |
IKE-TEST |
3DES |
SHA |
pre-shared key |
2 |
8 Hour |
SGW-2 addr |
PROTO_IPSEC_ESP |
ESP_3DES |
Tunnel |
HMAC-SHA |
8 Hour |
Net-v addr |
Net-z addr |
any |
*Ex Mode = Exchange mode
*IDx = identity payload(FQDN or user FQDN can also be chosen as IDx)
*IDci = identity payload
*IDcr = identity payload
*Enc Alg = IKE Encryption Algorithm
*Hash Alg = IKE Authentication Algorithm
*Key Value = pre-shared key value
*PH1 Lt = Phase-1 Lifetime
*PH2 Lt = Phase-2 Lifetime
*Proto ID = Protocol Identifier
*Trans ID = Transform Identifier
*Mode = Encapsulation Mode
*Auth Alg = Authentication Algorithm
*Auth Method = Authentication Method
*DH Group = Diffie-Hellman Group
*Upper = Upper Layer Protocol
*SGW-1 addr = SGW-1 address
*SGW-2 addr = SGW-2 address
*Net-z = Net-z network address
*Net-v = Net-v network address
This test check is following.
IDENTITY PROTECTION EXCHANGE
# Initiator(TN) Direction Responder(NUT)
(1) HDR; SA ========> <-----Transform-ID field : 248(invalid value)
(2-A) X <======== HDR; SA <-----Must not transmit
or
(2-B) <======== HDR; N/D
Judgement (Check *1)
1. Send the first message from TN
In the first message (1), the initiator generates a proposal it
considers adequate to protect traffic for the given situation. The
Security Association, Proposal, and Transform payloads are included
in the Security Association payload (for notation purposes).
2. Receive the second message from NUT
In the second message (2-B), the responder indicates either an ISAKMP
Notify Payload or an ISAKMP delete Payload.
The first message must not be accepted. And the second message(2-A)
must not be returned
(* or INVALID-TRANSFORM-ID message(2-B) is returned).
*option : if you want to check the retruned Notify message.
Clean up SAD and SPD
RFC2408
5.6 Transform Payload Processing
(omit)
When a Transform payload is received, the receiving entity (initiator
or responder) MUST do the following:
1. Determine if the Transform is supported. If the Transform-ID
field contains an unknown or unsupported value, then that
Transform payload MUST be ignored and MUST NOT cause the
generation of an INVALID TRANSFORM event. If the Transform-ID
field is invalid, the payload is discarded and the following
actions are taken:
(a) The event, INVALID TRANSFORM, MAY be logged in the
appropriate system audit file.
(b) An Informational Exchange with a Notification payload
containing the INVALID-TRANSFORM-ID message type MAY be sent
to the transmitting entity. This action is dictated by a
system security policy.
2. Ensure the Transforms are presented according to the details
given in section 3.6 and 4.2. If the transforms are not formed
correctly, the following actions are taken:
(a) Possible events, BAD PROPOSAL SYNTAX, INVALID TRANSFORM,
INVALID ATTRIBUTES, are logged in the appropriate system
audit file.
(b) An Informational Exchange with a Notification payload
containing the BAD-PROPOSAL-SYNTAX, PAYLOAD-MALFORMED or
ATTRIBUTES-NOT-SUPPORTED message type MAY be sent to the
transmitting entity. This action is dictated by a system
security policy.
3. Process the subsequent Transform and Proposal payloads as defined
by the Next Payload field. Examples of processing these payloads
are given in section 4.2.1.
perldoc V6evalTool
IKE.html IKE Test Common Utility