#!/usr/bin/perl # # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Yokogawa Electric Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $TAHI: ct/icmp.p2/To_ICMPErr_Time_Exc_Code1.seq,v 1.6 2006/02/02 02:32:18 akisada Exp $ ######################################################################## BEGIN { $V6evalTool::TestVersion = '$Name: V6LC_P2_1_4_6 $'; } use V6evalTool; use icmp; use lib '../'; use AdvancedFunctionality; sub cleanup_tunnel(); $IF=Link0; checkNUT(router); %pktdesc = ( time_exceeded => 'Send Time Exceeded Message with Hoplimit = 0', dst_unreach_from_nut => 'Receive ICMP Error (Destination Unreachable Error Message with code 0)', ); # # # vLogHTML("Initialization
"); vCapture($IF); $ret = setup(); if ($ret == $icmp::subFail){ goto error; } unless($AdvancedFunctionality::HAS_MULTIPLE_INTERFACES) { my $srcaddr = vMAC2LLAddr($V6evalTool::NutDef{'Link0_addr'}); $srcaddr =~ s/fe80::/3ffe:501:ffff:100:/; my $dstaddr = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); $dstaddr =~ s/fe80::/3ffe:501:ffff:110:/; my $insrcaddr = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); $insrcaddr =~ s/fe80::/3ffe:501:ffff:100:/; my $indstaddr = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); $indstaddr =~ s/fe80::/3ffe:501:ffff:101:/; my $gateway = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); my $Link0_device = $V6evalTool::NutDef{'Link0_device'}; # if(vRemote('route.rmt', 'cmd=add', # "prefix=3ffe:501:ffff:110::", 'prefixlen=64', # "gateway=$gateway", "if=$Link0_device")) { # # vLogHTML('route.rmt: '. # 'Can\'t configure the route.
'); # # exit($V6evalTool::exitFatal); # } if(vRemote('tunnel.rmt', 'if=0 '. 'prefixlen=64 '. 'routeprefixlen=64 '. 'addrfamily=inet6 '. "prefix=3ffe:501:ffff:101:: ". "srcaddr=$srcaddr ". "dstaddr=$dstaddr ". "insrcaddr=$insrcaddr ". "indstaddr=$indstaddr ")) { vLogHTML('tunnel.rmt: '. 'Can\'t configure the tunnel.
'); exit($V6evalTool::exitFatal); } } # # # vLogHTML("Test
"); vSend($IF, time_exceeded); #%ret = vRecv($IF, $icmp::wait_reply, 0, 0, dst_unreach, ns_global, ns_global_sll); %ret = icmp_vRecv($IF, $icmp::wait_reply, 0, 0, dst_unreach_from_nut); if ($ret{status} != 0) { vLog("TN do not receive ICMPv6 error message from NUT"); vLog("OK"); cleanup(); unless($AdvancedFunctionality::HAS_MULTIPLE_INTERFACES) { cleanup_tunnel(); } vStop($IF); exit($V6evalTool::exitPass); } elsif ($ret{recvFrame} eq 'dst_unreach_from_nut') { vLogHTML('TN receive ICMPv6 error message from NUT
'); goto error; } else { vLogHTML('TN receive unexpected packets from NUT
'); goto error; } error: vLogHTML('FAIL
'); cleanup(); unless($AdvancedFunctionality::HAS_MULTIPLE_INTERFACES) { cleanup_tunnel(); } vStop($IF); exit($V6evalTool::exitFail); #----------------------------------------------------------------------# sub cleanup_tunnel() { my $srcaddr = vMAC2LLAddr($V6evalTool::NutDef{'Link0_addr'}); $srcaddr =~ s/fe80::/3ffe:501:ffff:100:/; my $dstaddr = vMAC2LLAddr($V6evalTool::NutDef{'Link0_addr'}); $dstaddr =~ s/fe80::/3ffe:501:ffff:110:/; my $insrcaddr = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); $insrcaddr =~ s/fe80::/3ffe:501:ffff:100:/; my $indstaddr = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); $indstaddr =~ s/fe80::/3ffe:501:ffff:101:/; my $gateway = vMAC2LLAddr($V6evalTool::TnDef{'Link0_addr'}); my $Link0_device = $V6evalTool::NutDef{'Link0_device'}; # if(vRemote('route.rmt', 'cmd=delete', # "prefix=3ffe:501:ffff:110::", 'prefixlen=64', # "gateway=$gateway", "if=$Link0_device")) { # # vLogHTML('route.rmt: '. # 'Can\'t configure the route.
'); # # exit($V6evalTool::exitFatal); # } if(vRemote('tunnel.rmt', 'if=0 '. 'deletetunnel '. 'prefixlen=64 '. 'routeprefixlen=64 '. 'addrfamily=inet6 '. "prefix=3ffe:501:ffff:101:: ". "srcaddr=$srcaddr ". "dstaddr=$dstaddr ". "insrcaddr=$insrcaddr ". "indstaddr=$indstaddr ")) { vLogHTML('tunnel.rmt: '. 'Can\'t configure the tunnel.
'); exit($V6evalTool::exitFatal); } return($ret); } ######################################################################## __END__ =head1 NAME To_ICMPErr_Dst_Unreach_3_TEx.seq - check Message Processing Rules (ICMPv6 Destination Unreachable with code 3) =head1 TARGET Router =head1 SYNOPSIS To_ICMPErr_Dst_Unreach_3_TEx.seq [-tooloption ...] -p To_ICMPErr_Dst_Unreach_3_TEx.def =head1 NETWORK CONFIGURATION This test is On-Link Network Configuration test. Physical/Logical Network Configuration --------------------------------------- | | NUT TN =head1 INITIALIZATION Perform Common Test Setup 1.1. =head1 TEST PROCEDURE This test verifies that the message processing rule , (e) An ICMPv6 error message MUST NOT be sent as a result of receiving: (e.1) an ICMPv6 error message, or TN NUT --------------------------- 1. === ICMPv6 Time Exceeded ===> src address : TN global address dst address : Off-link unreachable address 2. << JUDGEMENT >> <=== No packets === or <=== ICMPv6 Destination Unreachable === Code is 0 =head1 JUDGEMENT << PASS >> NUT do not send ICMPv6 Destination Unreachable. << FAIL >> NUT send ICMPv6 Destination Unreachable. =cut # =head1 REFERENCE # # RFC2463 # 2.4 Message Processing Rules # # Implementations MUST observe the following rules when processing # ICMPv6 messages (from [RFC-1122]): # # =begin html # 
#     (e) An ICMPv6 error message MUST NOT be sent as a result of
#         receiving:

#          (e.1) an ICMPv6 error message, or
#
# # =end html # =pod =head1 REFERENCE =begin html 
RFC 2463 - ICMPv6 (ICMP for IPv6)
=end html =head1 SEE ALSO perldoc V6evalTool =cut