#!/usr/bin/perl # # $Name: V6LC_P2_1_4_6 $ # # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Yokogawa Electric Corporation. # All rights reserved. # # Redistribution and use of this software in source and binary # forms, with or without modification, are permitted provided that # the following conditions and disclaimer are agreed and accepted # by the user: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with # the distribution. # # 3. Neither the names of the copyrighters, the name of the project # which is related to this software (hereinafter referred to as # "project") nor the names of the contributors may be used to # endorse or promote products derived from this software without # specific prior written permission. # # 4. No merchantable use may be permitted without prior written # notification to the copyrighters. # # 5. The copyrighters, the project and the contributors may prohibit # the use of this software at any time. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND # CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING # BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING # IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # $Id: receiveMTU512.seq,v 1.5 2005/11/30 09:52:59 akisada Exp $ # ###################################################################### BEGIN { $V6evalTool::TestVersion = '$Name: V6LC_P2_1_4_6 $'; } use V6evalTool; use CommonPMTU; $pktdesc{'echo_request1280'} = 'Send Echo Request (Packet size is 1280)'; $pktdesc{'echo_reply1280'} = 'Recv Echo Reply (Packet size is 1280)'; $pktdesc{'PktTooBig512'} = 'Send Packet Too Big message (1279 octets)'; $pktdesc{'echo_reply1280_1'} = 'Recv Echo Reply (1280 octets, 1st fragment)'; $pktdesc{'echo_reply1280_2'} = 'Recv Echo Reply (1280 octets, 2nd fragment)'; $endStatus = $V6evalTool::exitPass; $IF = 'Link0'; vCapture($IF); #====================================================================== if (setup11($IF) != $CommonPMTU::Success) { $ret = cleanup($IF); if ($ret == $CommonPMTU::Success) { exit($V6evalTool::exitFail); } else { exit($V6evalTool::exitFatal); } } #====================================================================== #----- test vSend($IF, 'echo_request1280'); %ret = nd_vRecv_EN($IF, $CommonPMTU::wait_reply, 0, 0, 'echo_reply1280'); if ($ret{'status'} != 0) { vLogHTML('Cannot receive Echo Reply
'); vLogHTML('NG
'); $endStatus = $V6evalTool::exitFail; } else { vLogHTML('OK
'); } vSend($IF, 'PktTooBig512'); #----- create fragment pkt.def(from tn2 to nut) $original_name = "echo_reply1280"; #must same echo reply packet $MTU_value = 1500; #MTU value, fixed $PKT_size = 1280; #this size is IPv6 pakcet size.,1280,1400,1500 etc $frag_start = 48; #1280 or 48 #should be 48 $data_size_1st = $frag_start - 40 - 8; $data_size_2nd = ($PKT_size - 40) - $data_size_1st; #define packet format $header_ether = '_HETHER_nut2tn'; $ip_src = 'NUT_GL0_ADDR'; $ip_dst = 'TN2_GL2_ADDR'; $def_file = 'pkt_frag.def'; #fragment define file #write def file if(writefragdef($def_file, $original_name, $MTU_value, $PKT_size,$data_size_1st,$data_size_2nd, $header_ether, $ip_src, $ip_dst ) != $CommonPMTU::Success) { exit($V6evalTool::exitFatal); } vCPP("-DFRAG_DEF -DFRAG_ID=any"); vSend($IF, 'echo_request1280'); %ret = nd_vRecv_EN($IF, $CommonPMTU::wait_reply, 0, 0, 'echo_reply1280_frag',@CommonPMTU::fragment_1st_name); if ($ret{'status'} == 0) { if($ret{'recvFrame'} eq 'echo_reply1280_frag'){ vLogHTML('OK
'); } else{ vLogHTML('OK. recive 1st fragment.
'); $pkt_name = $ret{'recvFrame'}; $pkt_name =~ /^echo_reply(\d+)_1st_(\d+)$/; $size_2nd_frag = $1-$2-40; $name_2nd_frag = "echo_reply$1"."_2nd_$size_2nd_frag"; %ret = nd_vRecv_EN($IF, $CommonPMTU::wait_reply, 0, 0, "$name_2nd_frag"); if ($ret{'status'} == 0) { vLogHTML('OK. recive 2nd fragment.
'); } else { vLogHTML('NG. can\'t recive 2nd fragment.
'); $endStatus = $V6evalTool::exitFail; } } }else { vLogHTML('Cannot receive Echo Reply
'); vLogHTML('NG
'); $endStatus = $V6evalTool::exitFail; } unlink($def_file); #----- end test $ret = cleanup($IF); vStop($IF); if ($ret == $CommonPMTU::Success) { exit($endStatus); } else { exit($V6evalTool::exitFatal); } ###################################################################### __END__ =head1 NAME receiveMTU512 - Verify that a node does not reduce its estimate of the Path MTU below the IPv6 minimum link MTU. =head1 TARGET Host and Router =head1 SYNOPSIS =begin html 
  configmPing1280.seq [-tooloption ...] -pkt configmPing1280.def
    -tooloption : v6eval tool option
=end html =head1 INITIALIZATION If the NUT is a host, send a Router Advertisment. If the NUT is a router, configure a default route with TN as the next hop. And make state of Neighbor Cashe Entry for TN's addresses reachable. =head1 TEST PROCEDURE TN2 TR1 NUT | | | |-------------------------------------------->| | 1.Echo Request | | | (1280 octets) | | | | | |<--------------------------------------------| | 2.Echo Reply | | | (1280 octets) | | | | | | +--------------------->| | | 3.Packet Too Big | | | (MTU 512) | | | | |-------------------------------------------->| | 4.Echo Request | | | (1280 octets) | | | | | |<--------------------------------------------| | 5.Echo Reply | | | (1288 octets) | | | | | v v v 1. Send Echo Request 2. Receive Echo Reply <> 3. Send Packet Too Big message 4. Send Echo Request 5. Receive Echo Reply(include Fragment Header) or fragmented Echo Reply <> Echo Request Data is: IPv6 Header Version = 6 Traffic Class = 0 FlowLabel = 0 PayloadLength = 1240 NextHeader = 58 (ICMPv6) SourceAddress = TN2's Global Address DestinationAddress = NUT's Global Address ICMP Echo Request Type = 128 (Echo Request) Code = 0 Checksum = (auto) Identifier = 0xffff SequenceNumber = 1 PayloadData = (1232 octets) Packet Too Big message is: IPv6 Header Version = 6 Traffic Class = 0 FlowLabel = 0 PayloadLength = 1280 NextHeader = 58 (ICMPv6) SourceAddress = TR1's Global Address DestinationAddress = NUT's Global Address ICMP Echo Request Type = 2 (Packet Too Big) Code = 0 Checksum = (auto) MTU = 512 PayloadData = (1232 octets) =head1 JUDGEMENT PASS: <> Echo Reply Received or Fragment Echo Reply Received <> Echo Reply which include Fragment Header Received, or Fragment Echo Reply Received. IPv6 Header Version = 6 Traffic Class = 0 FlowLabel = 0 PayloadLength = 1240 NextHeader = 58 (ICMPv6) SourceAddress = Target Global Address Destination Address = TN2's Global Address ICMP Echo Reply Type = 129 (Echo Reply) Code = 0 Checksum = (auto) Identifier = 0xffff (same as Echo Request) SequenceNumber = 1 (same as Echo Request) PayloadData = (1232 octets) (same as Echo Request) =cut # =head1 REFERENCE # # # RFC1981 # # 4. Protocol Requirements # # As discussed in section 1, IPv6 nodes are not required to implement # Path MTU Discovery. The requirements in this section apply only to # those implementations that include Path MTU Discovery. # # When a node receives a Packet Too Big message, it MUST reduce its # estimate of the PMTU for the relevant path, based on the value of the # MTU field in the message. The precise behavior of a node in this # circumstance is not specified, since different applications may have # different requirements, and since different implementation # architectures may favor different strategies. # # After receiving a Packet Too Big message, a node MUST attempt to # avoid eliciting more such messages in the near future. The node MUST # reduce the size of the packets it is sending along the path. Using a # PMTU estimate larger than the IPv6 minimum link MTU may continue to # elicit Packet Too Big messages. Since each of these messages (and # the dropped packets they respond to) consume network resources, the # node MUST force the Path MTU Discovery process to end. # # Nodes using Path MTU Discovery MUST detect decreases in PMTU as fast # as possible. Nodes MAY detect increases in PMTU, but because doing # so requires sending packets larger than the current estimated PMTU, # and because the likelihood is that the PMTU will not have increased, # this MUST be done at infrequent intervals. An attempt to detect an # increase (by sending a packet larger than the current estimate) MUST # NOT be done less than 5 minutes after a Packet Too Big message has # been received for the given path. The recommended setting for this # timer is twice its minimum value (10 minutes). # # A node MUST NOT reduce its estimate of the Path MTU below the IPv6 # minimum link MTU. # # Note: A node may receive a Packet Too Big message reporting a # next-hop MTU that is less than the IPv6 minimum link MTU. In that # case, the node is not required to reduce the size of subsequent # packets sent on the path to less than the IPv6 minimun link MTU, # but rather must include a Fragment header in those packets [IPv6- # SPEC]. # # A node MUST NOT increase its estimate of the Path MTU in response to # the contents of a Packet Too Big message. A message purporting to # announce an increase in the Path MTU might be a stale packet that has # been floating around in the network, a false packet injected as part # of a denial-of-service attack, or the result of having multiple paths # to the destination, each with a different PMTU. # # RFC2460 # # 5. Packet Size Issues # # IPv6 requires that every link in the internet have an MTU of 1280 # octets or greater. On any link that cannot convey a 1280-octet # packet in one piece, link-specific fragmentation and reassembly must # be provided at a layer below IPv6. # # Links that have a configurable MTU (for example, PPP links [RFC- # 1661]) must be configured to have an MTU of at least 1280 octets; it # is recommended that they be configured with an MTU of 1500 octets or # greater, to accommodate possible encapsulations (i.e., tunneling) # without incurring IPv6-layer fragmentation. # # From each link to which a node is directly attached, the node must be # able to accept packets as large as that link's MTU. # # It is strongly recommended that IPv6 nodes implement Path MTU # Discovery [RFC-1981], in order to discover and take advantage of path # MTUs greater than 1280 octets. However, a minimal IPv6 # implementation (e.g., in a boot ROM) may simply restrict itself to # sending packets no larger than 1280 octets, and omit implementation # of Path MTU Discovery. # # In order to send a packet larger than a path's MTU, a node may use # the IPv6 Fragment header to fragment the packet at the source and # have it reassembled at the destination(s). However, the use of such # fragmentation is discouraged in any application that is able to # adjust its packets to fit the measured path MTU (i.e., down to 1280 # octets). # # A node must be able to accept a fragmented packet that, after # reassembly, is as large as 1500 octets. A node is permitted to # accept fragmented packets that reassemble to more than 1500 octets. # An upper-layer protocol or application that depends on IPv6 # fragmentation to send packets larger than the MTU of a path should # not send packets larger than 1500 octets unless it has assurance that # the destination is capable of reassembling packets of that larger # size. # # In response to an IPv6 packet that is sent to an IPv4 destination # (i.e., a packet that undergoes translation from IPv6 to IPv4), the # originating IPv6 node may receive an ICMP Packet Too Big message # reporting a Next-Hop MTU less than 1280. In that case, the IPv6 node # is not required to reduce the size of subsequent packets to less than # 1280, but must include a Fragment header in those packets so that the # IPv6-to-IPv4 translating router can obtain a suitable Identification # value to use in resulting IPv4 fragments. Note that this means the # payload may have to be reduced to 1232 octets (1280 minus 40 for the # IPv6 header and 8 for the Fragment header), and smaller still if # additional extension headers are used. # =pod =head1 REFERENCE =begin html 
RFC 1981 - Path MTU Discovery for IPv6
=end html =head1 SEE ALSO perldoc V6evalTool =cut