NAME

        To_Multi_Dst_Unreach_4.seq - check Message Processing Rules (ICMPv6
         Destination Unreachable )


TARGET

        Host/Router


SYNOPSIS

        To_Multi_Dst_Unreach_4.seq [-tooloption ...] -p To_Multi_Dst_Unreach_4.def


INITIALIZATION

        If the NUT is a host, send a Router Advertisment.
        If the NUT is a router, configure a default route with TN as the next hop.
        And make state of Neighbor Cashe Entry for TN's addresses reachable.


TEST PROCEDURE

        This test verifies that the message processing rule,
        
        An ICMPv6 error message MUST NOT be sent as a result of
        receiving:
        a packet destined to an IPv6 multicast address (there are
        two exceptions to this rule: (1) the Packet Too Big
        Message - Section 3.2 - to allow Path MTU discovery to
        work for IPv6 multicast, and (2) the Parameter Problem
        Message, Code 2 - Section 3.4 - reporting an unrecognized
        IPv6 option that has the Option Type highest-order two
        bits set to 10).
        TN                      NUT
        ---------------------------
        1.
         === UDP packet  ===>
                src address : TN link local address
                dst address : all node multicast address
             port number is not used in NUT
        2.
        << JUDGEMENT >>
         <=== No pakcet ===
                        or
         <=== ICMPv6 Destination Unreachable ===
             Code is 4


JUDGEMENT

        << PASS >>
                NUT do not send ICMPv6 Destination Unreachable.
                
        << FAIL >>      
                NUT send ICMPv6 Destination Unreachable.


REFERENCE

RFC 2463 - ICMPv6 (ICMP for IPv6)


SEE ALSO

          perldoc V6evalTool