Test Information

TitleSequence number too small
CommandLine./CN_IncorrectSeqNumber.seq -pkt ./CN_IncorrectSeqNumber.def -log 8.html -ti Sequence number too small
TestVersion
ToolVersionundefined
Start2002/03/28 13:47:12
Tn/usr/local/v6eval//etc//tn.def
Nu/usr/local/v6eval//etc//nut.def
Pkt./CN_IncorrectSeqNumber.def
Systemmanual
TargetNameRed Hat Linux release 7.2 (Enigma) + usagi cvs 2002/03/26 20:00
HostNameusagi.tahi.org
Typehost

Test Sequence Execution Log

13:47:13Start

#### ping test ###############################################
13:47:13Start Capturing Packets (Link0)
13:47:13 vSend(Link0,ra_r1)
Send RA from R1
13:47:13 Wait 3 second
13:47:16 vSend(Link0,echorequest)
Send Echo Request from MN to NUT (no Home Address Option)

Wait Echo Reply
13:47:16 vRecv(Link0,echoreply) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply from NUT to MN (no Routing Header)

#### Binding Update test #####################################
13:47:16 vSend(Link0,na_r1_linklocal)
Send NA from R1 to NUT
13:47:16 Wait 3 second
13:47:19Clear Captured Packets (Link0)
13:47:19 vSend(Link0,echorequest0)
Send Echo Request (Binding Update Option - SeqNumber is 0)

Wait Echo Reply
13:47:20 vRecv(Link0,param_problem echoreply0) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply from NUT to MN (with Binding Cache entry)
13:47:20 vSend(Link0,echorequest1)
Send Echo Request (Binding Update Option - SeqNumber is 1)

Wait Echo Reply
13:47:20 vRecv(Link0,echoreply1) timeout:5 cntLimit:0 seektime:0
Recv Echo Reply from NUT to MN (with Binding Cache entry)
13:47:20 vSend(Link0,bindingupdate)
Send Binding Update Option - SeqNumber is 0
13:47:20 vRecv(Link0,bindingacknowledgement) timeout:5 cntLimit:0 seektime:0
Recv Binding Acknowledgement

OK
13:47:20End

Packet Reverse Log