Thank you for clarifying which variables can be changed I did a few changes
on the ones you mentioned before while running the test. Fortunately the
problem mentioned on this thread is solved and is not related with tahi at
all.
Thanks
@>-,--- @>-,--- @>-,--- @>-,--- @>-,--- @>-,---
Maria Perez
Software Engineer
Konica Minolta Systems Laboratory Inc.
@>-,--- @>-,--- @>-,--- @>-,--- @>-,--- @>-,---
-----Original Message-----
From: Yukiyo Akisada [mailto:Yukiyo.Akisada@jp.yokogawa.com]
Sent: Monday, May 09, 2005 12:37 AM
To: maria.perez@bil.konicaminolta.us
Cc: users@tahi.org
Subject: [users:00009] Re: changed network card obtained different results
Hi, Maria.
On Thu, 5 May 2005 14:01:24 -0700
"Maria Perez" <maria.perez@bil.konicaminolta.us> wrote:
> I'm running tahi Self Test P2 v1.2.13, in the first configuration a
> 3C905B-TX nic was used. On the second configuration a 3C905CX-TX-M nic is
> being used, everything else software, hardware, OS is the same. However
> with the second configuration almost all the test cases are failing (right
> now the folder being tested is Neighbor Discovery nd.p2) I'm suspecting
> there is a timing issue, I was wondering if there are any timing
parameters
> that I could lawfully change?
To obtain Logo, you can edit only following files.
./config.txt
./spec.p2/config.pl
./nd.p2/config.pl
./addr.p2/config.pl
./pmtu.p2/config.pl
./icmp.p2/config.pl
Did you try them?
Thanks,
----
Yukiyo Akisada <Yukiyo.Akisada@jp.yokogawa.com>