thanks a lot that worked for me.
rajiv.
-----Original Message-----
From: Lv Liangying [mailto:Lvly@nanjing-fnst.com]
Sent: Wednesday, August 24, 2005 6:16 PM
To: users@tahi.org
Subject: [users:00093] Re: help understanding test failures.
Hello,
Your specified prefix is wrong
Prefix = 3ffe:501:ffff:100:201:e8ff:fe00:4c8b ==>Prefix = 3ffe:501:ffff:100::
I think maybe your /etc/radvd.conf comes to error.
----- Original Message -----
From: "Rajiv Krishnamurthy" <rajivk@force10networks.com>
To: <users@tahi.org>
Sent: Thursday, August 25, 2005 8:46 AM
Subject: [users:00092] help understanding test failures.
> hello folks,
>
> apologies if this question has already been posted or if this is not the right forum. I am running some of the tahi test suites against our implementation of the ipv6 stack and some of the tahi scripts are failing and i need some help understanding what the problem is.
>
> Specifically I'm running the following tests
>
> 2.7 Sending RA (Router Only)
> 56)Sending Unsolicited RA(min values)
>
> Basically the tahi software receives the RA's but then rejects them saying it got some unexpected parameters.
> I have the test trace at the bottom. but don't understand what are the parameters that are incorrect or unexpected.
>
>
>
> ---------------------------------------------------------------------------------------------------------
> #
> #
> #
> #
> # ./routerSendUnsolRaMin.seq -pkt ./routerSendUnsolRaMin.def -v -log 56.html -ti Sending Unsolicited RA
>
>
> IPv6 Conformance Test Report
>
>
>
> Test Information
>
> Title Sending
> CommandLine ./routerSendUnsolRaMin.seq -pkt ./routerSendUnsolRaMin.def -v -log 56.html -ti Sending Unsolicited RA
> TestVersion REL_2_1_1
> ToolVersion REL_2_3_2
> Start 2005/08/24 17:45:06
> Tn .//tn.def
> Nu /usr/local/v6eval//etc//nut.def
> Pkt ./routerSendUnsolRaMin.def
> System manual
> TargetName Force10
> HostName E1200-4
> Type router
>
>
> Test Sequence Execution Log
>
> 17:45:06 Start
> 17:45:06
>
> vRemote(rtadvd.rmt) ``/usr/local/v6eval//bin/manual//rtadvd.rmt -t manual -u root -p v6eval -T /usr/bin/cu -d cuaa0 stop''
>
>
> rtadvd> start/stop router advertisement of NUT(kame-freebsd) manually,
> rtadvd> then press enter key.
>
>
>
>
> 17:45:08
> Wait 10 sec to ignore RAs w/ RouterLifetime=0
>
> Wait 10 sec to ignore RAs w/ RouterLifetime=0
> 17:45:18
>
> vRemote(rtadvd.rmt) ``/usr/local/v6eval//bin/manual//rtadvd.rmt -t manual -u root -p v6eval -T /usr/bin/cu -d cuaa0 start mininterval=7 maxinterval=10 rltime=0 rtime=0 retrans=0 link0=gig9/0''
>
>
> rtadvd> start/stop router advertisement of NUT(kame-freebsd) manually,
> rtadvd> then press enter key.
>
>
>
> 17:45:21 Start Capturing Packets (Link0)
> Start Capturing Packets (Link0)
>
> 17:45:21
> vRecv(Link0,RAra_nut2allnode_min RAra_nut2allnode_min_p RAra_nut2allnode_min__p RAra_nut2allnode_min_sp RAra_nut2allnode_min_pm RAra_nut2allnode_min_sm RAra_nut2allnode_min_spm RAra_nut2allnode_any) timeout:20 cntLimit:0 seektime:0
> ERROR: Got RA, but unexpected parameters
>
> ERROR: Got RA, but unexpected parameters
>
>
>
>
> NG
>
> 17:45:26 End
>
> Packet Reverse Log
>
> Recv at 17:45:26
> Frame_Ether (length:118)
> | Hdr_Ether (length:14)
> | | DestinationAddress = 33:33:00:00:00:01
> | | SourceAddress = 00:01:e8:00:4c:8b
> | | Type = 34525
> | Packet_IPv6 (length:104)
> | | Hdr_IPv6 (length:40)
> | | | Version = 6
> | | | TrafficClass = 0
> | | | FlowLabel = 0
> | | | PayloadLength = 64
> | | | NextHeader = 58
> | | | HopLimit = 255
> | | | SourceAddress = fe80::201:e8ff:fe00:4c8b
> | | | DestinationAddress = ff02::1
> | | ICMPv6_RA (length:64)
> | | | Type = 134
> | | | Code = 0
> | | | Checksum = 16134 calc(16134)
> | | | CurHopLimit = 64
> | | | MFlag = 0
> | | | OFlag = 0
> | | | HFlag = 0
> | | | Preference = 0
> | | | Reserved = 0
> | | | LifeTime = 0
> | | | ReachableTime = 0
> | | | RetransTimer = 0
> | | | Opt_ICMPv6_SLL (length:8)
> | | | | Type = 1
> | | | | Length = 1
> | | | | LinkLayerAddress = 00:01:e8:00:4c:8b
> | | | Opt_ICMPv6_MTU (length:8)
> | | | | Type = 5
> | | | | Length = 1
> | | | | Reserved = 0
> | | | | MTU = 1500
> | | | Opt_ICMPv6_Prefix (length:32)
> | | | | Type = 3
> | | | | Length = 4
> | | | | PrefixLength = 64
> | | | | LFlag = 1
> | | | | AFlag = 1
> | | | | RFlag = 0
> | | | | Reserved1 = 0
> | | | | ValidLifetime = 2592000
> | | | | PreferredLifetime = 604800
> | | | | Reserved2 = 0
> | | | | Prefix = 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
> ===RAra_nut2allnode_min=================================
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min_p=================================
> ng meta ICMPv6_RA.Opt_ICMPv6_Prefix != ICMPv6_RA.Opt_ICMPv6_SLL
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min__p=================================
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min_sp=================================
> ng function at Opt_ICMPv6_MTU not match with comb(_SLLOPT_nut,RAprefixopt)
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min_pm=================================
> ng function at Opt_ICMPv6_SLL not match with comb(RAprefixopt,RAmtuopt)
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min_sm=================================
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_min_spm=================================
> ng function at Opt_ICMPv6_Prefix not match with comb(_SLLOPT_nut,RAprefixopt,RAmtuopt)
> ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA
> ===RAra_nut2allnode_any=================================
>
> #
>