On Fri, 2007-07-13 at 12:55 +0530, Channa wrote:
> Hi,
> In TAHI conformance test suite there are following tests :
>
> >IPv6 Specification
> >ICMPv6 for IPv6 Specification
> >Neighbor Discovery
> >IPv6 Stateless Address Autoconfiguration
> >IPv6 Path MTU Discovery
> >Default Router Preferences, More-Specific Routes, and Load Sharing
> >IPSec AH and ESP for IPv6 IPSec ESP for IPv6(UDP) IPSec AH and ESP
> for
> >IPv4 IPSec AH and ESP for IPv4(UDP) Mobility Support in IPv6 (ID-20)
> -
> >Correspondent Node Mobility Support in IPv6 (ID-20) - Home Agent
> >Mobility Support in IPv6 (ID-20) - Mobile Node Default Address
> >Selection for Internet Protocol version 6 (IPv6) DNS discovery
> Prefix
> >delegation
> >IPv6 over IPv4 Tunnel
> >NAT-PT
> >Robustness
>
> Is it required to test all for IPv6 stack testing on Linux??
> Since there are some IPv4 related and Mobility related tests included.
>
> Thanks in Advance,
> Channagoud
You start with the Self-Tests. They are more focused to IPv6 or IPSec
or Mobility.
-regards
Subhendu