Hi, Yao.
Please replace /usr/local/v6eval/bin/manual/racontrol.rmt to attached one.
Or please wait for next release of v6eval.
Modification of remote control file in v6eval is permitted to obtain LOGO.
Thanks,
On Fri, 1 Feb 2008 10:15:47 +0900
Yukiyo Akisada <akisada@tahi.org> wrote:
> Hi, Yao.
>
> I see.
> It is really few message for users as you said... :-(
>
> I will add the message to v6eval.
>
> Thanks for your input.
>
>
> On Thu, 31 Jan 2008 13:07:16 -0700
> Yinghui Yao <Yinghui.Yao@alcatel-lucent.com> wrote:
>
> > Hi,
> >
> > I'm failing ND#124 because I enabled RA on both link0 and link1 when I see this prompt from Tahi
> >
> > racontrol>
> > racontrol> Start to send RA using following configuration.
> > racontrol>
> > racontrol> configuration should be the value specified in RFC 2461.
> > racontrol>
> > racontrol> Press Enter key for continue.
> > racontrol>
> >
> > However, reading the details of testlog, it seems to imply sending RA on only link0. My question is
> >
> > 1) How am I supposed to know which link to send on
> > 2) The above message indicates sending RA on all links or only link0
> > 3) In other message, when Tahi doesn't specifically say configure on which interfaces, do I assume both?
> >
> > Thanks,
> > Yinghui Yao
> > Alcatel-Lucent
> >
> >
> >
> >
>
>
> ------------------------------------------------------------------------
> Yukiyo Akisada <akisada@tahi.org>
>
>
------------------------------------------------------------------------
Yukiyo Akisada <akisada@tahi.org>
533_2.rmt