Date: Wed, 13 Feb 2008 14:56:24 +0530
From: "rukmangada Katthem" <rukmangada.k@gmail.com>
Subject: [users:00592] Re: Query on interop testing for IPv6ReadyLogoPhase1
To: "Yukiyo Akisada" <akisada@tahi.org>, users@tahi.org
Message-Id: <eebe75d70802130126m6a42aeaen8255b888993ebcef@mail.gmail.com>
In-Reply-To: <20080213092437.9ca2f77f.akisada@tahi.org>
References: <eebe75d70802120213i4ef956cfnd4a44253fe344c7a@mail.gmail.com>	 <20080213092437.9ca2f77f.akisada@tahi.org>
X-Mail-Count: 00592

Hi ,

Thanks for your early comment.

As Per document for phase-1, Only one vendor router is required.
And One Host required. [Other then target i.e NUT]

Our Device is Host Device.

Now Please Let me know whether 4 different vendor device are required for
interop. in Phase-1 ?
Because on below link it's mention 4 different vendor device is must .
http://www.ipv6ready.org/about_phase1.html

1) Self-test (inhouse test) base application
100% pass for Self-test based on the test specification.
*4 interoperable devices(*4) from other vendors including 2 hosts and 2
routers*.

We are planing to use FreeBSD as a router and WindowsXP as Host.
Is this two device works fine for Phase-1 Interop ??


Thanks,
K R Naidu


On 2/13/08, Yukiyo Akisada <akisada@tahi.org> wrote:
> Hi, K R Naidu.
>
> Talking about interoperability test, using vel isn't mandated.
> You can use it if you want, and vice versa.
>
> Test scenario itself is described in
> <
http://www.ipv6ready.org/pdf/IPv6Ready_PhaseII_Base_Interop_version_2_8_4.pdf
>.
>
> And filename syntax to submit is described in
> <http://www.ipv6ready.org/pdf/IPv6Ready_P2_interop_1-8.pdf>.
>
> Only these two documents are needed.
>
> In <IPv6Ready_PhaseII_Base_Interop_version_2_8_4.pdf>,
> you can see which tests must be performed for Phase-1 at page 8.
> The title is "Tests performed on Host/Router".
>
> You only need to perform the tests marked as "X" in Phase-I column.
>
> Thanks,
>
>
> On Tue, 12 Feb 2008 15:43:44 +0530
> "rukmangada Katthem" <rukmangada.k@gmail.com> wrote:
>
> > Hi,
> >
> >
> >
> > We are working for achieving IPv6 Ready Logo Phase1.
> >
> > We have completed conformance test suit (Selftest).
> >
> >
> >
> > Now We are planning to Do interoperability test for Phase-1, But we
> > are confuse with lot of document available for introp.
> >
> >
> >
> > So please let us know what exact test scenarios we need to run for
introp.
> >
> > Also do we need to run tool VEL.
> >
> >
> >
> > Please provide us document which states about scenarios for Phase-1
introp.
> >
> >
> >
> > Any help will be appreciated.
> >
> > Thanks,
> > K R Naidu
> >
> >
>
>
> ------------------------------------------------------------------------
> Yukiyo Akisada <akisada@tahi.org>
>

	
592_2.html (attatchment)(tag is disabled)