Greetings,
Is Self_Test_4-0-0b1 ( and v6eval-3.0.14.b1 ) supported on freeBSD 7.0 as
well as 6.2?
What became of Self_Test_1.5.0b4? How does 1.5.0b4 map to 4-0-0b1?
Finally, you mention below "The differences are", differences between
4-0-00b1 and what?
cheers,
Tony
=================
Tony Coon
acoon@vmware.com
"No amount of careful planning will ever replace dumb luck"
-----Original Message-----
From: Yukiyo Akisada [mailto:akisada@tahi.org]
Sent: Sunday, April 13, 2008 10:22 PM
To: users@tahi.org
Subject: [users:00663] call for public review
Hi, all.
The beta version of Self_Test (Self_Test_4-0-0b1) has been released.
This release is for public review at IPv6 Ready Logo Program.
Now,
IPv6 Ready Logo Program is planning to have the major version up.
You can find upcoming test specification and test scenario at
<http://www.ipv6ready.org/announcement/public_review20080411_p2core.html>.
The differences are
1) Support of IPv6 Error message - Beyond Scope of Source Address (Code
2)
- RFC 4443 Section 3.1
2) Support of Deprecation of Type 0 Routing Header - RFC 5095
3) Support of Disabling IP Operation once a DAD Failure has occurred.
- RFC 4862 Section 5.4.5
4) Support of On-link Determination
- "a host properly rejects an invalid prefix length,
however the prefix length is still valid for on-link determination
when the on-link flag is true". - RFC 4862 Section 6.3.4
5) Support of Address Architecture - RFC 4291
If you have comments for test specification and test scenario, please post to
<ipv6ready-info@ipv6ready.org>.
If you have comments for test tool itself, please post to <contact@tahi.org>
or <users@tahi.org>.
--
Yukiyo Akisada <akisada@tahi.org>