Date: Tue, 29 Apr 2008 15:01:40 -0500
From: Christy L Norman <cnorman@us.ibm.com>
Subject: [users:00696] Re: Execution of "Router Only" test cases.
To: users@tahi.org
Message-Id: <OF0C1D837F.3E52B18E-ON8625743A.006CA597-8625743A.006E2858@us.ibm.com>
In-Reply-To: <AA31D864FA351D45AF4E8B521353AA63255E75@de01exm72.ds.mot.com>
X-Mail-Count: 00696

Try deleting the line with 'router' in it and retyping it, with only one 
tab between the label and value. I noticed that you have a tab, several 
spaces, then the value (router). I've had a problem with this when I 
changed from manual to automated. 

Some more information about what's happening would be useful if you're 
still having problems. What does it say for the ones that didn't pass? 
There's always something like:

TN did not receive NS for Host1 from NUT.
NUT does not deal with Preference correctly.
NG

Or something else semi-useful in red. 




"Kolli Venu-XRCD64" <XRCD64@motorola.com> 
04/29/2008 12:52 PM
Please respond to
users@tahi.org


To
<users@tahi.org>, Christy L Norman/Rochester/IBM@IBMUS
cc

Subject
[users:00694] Re: Execution of "Router Only" test cases.






Thanks for your response.
 
Yes , the other test cases run fine . 
 
In the IPv6 Specification results i see all the tests as PASSED apart from 

- initialization test 
- "router only" tests 
- "host only" tests
 
Thanks & Regards,

From: Christy L Norman [mailto:cnorman@us.ibm.com] 
Sent: Tuesday, April 29, 2008 1:16 PM
To: users@tahi.org
Subject: [users:00693] Re: Execution of "Router Only" test cases.


What happens when you try this? Do you get an error? What are the commands 
you're using and the error you get (if you get one)? Does it work if you 
try to run another set of tests besides the "router only" ones?



"Kolli Venu-XRCD64" <XRCD64@motorola.com> 
04/29/2008 11:25 AM 

Please respond to
users@tahi.org



To
<users@tahi.org> 
cc

Subject
[users:00692] Execution of "Router Only" test cases.








Hi , 
  
Configured Linux system having FreeBSD with TAHI test suites. 
  
Connected two ethernet interfaces from Linux Box to cisco router with IPv6 
enabled on the interfaces. 
  
All the IPv6 Specification tests run well which are present in "ct" 
directory. I am not able to run the "router only" 
test cases even though i configured nut.def as a router and its interfaces 
mac addresses. 
  
Linux < --------- Eth 1 ------------> Cisco Router 
         <-----------Eth 2  -----------> 
  
Please find the attached config files and let me know how to enable the 
router only test cases. 
  
Thanks for your help. 
  
Thanks & Regards,
Venu[attachment "tn.def" deleted by Christy L Norman/Rochester/IBM] 
[attachment "nut.def" deleted by Christy L Norman/Rochester/IBM] 

	
696_2.html (attatchment)(tag is disabled)