Date: Wed, 30 Apr 2008 08:16:29 -0400
From: "Kolli Venu-XRCD64" <XRCD64@motorola.com>
Subject: [users:00697] Re: Execution of "Router Only" test cases.
To: <users@tahi.org>
Message-Id: <AA31D864FA351D45AF4E8B521353AA63255F14@de01exm72.ds.mot.com>
In-Reply-To: <OF0C1D837F.3E52B18E-ON8625743A.006CA597-8625743A.006E2858@us.ibm.com>
References: <AA31D864FA351D45AF4E8B521353AA63255E75@de01exm72.ds.mot.com> <OF0C1D837F.3E52B18E-ON8625743A.006CA597-8625743A.006E2858@us.ibm.com>
X-Mail-Count: 00697

Hi Norman , I still see same issue after making a change you suggested of having atab space it between the label and value .Please find the output. In the below output you can see TEST 3 and TEST 7 and not gettingexecuted as the test is for router only. Let me know if you need more information. ========= TEST 1 ==========./BEGIN.seq -pkt /dev/null -log 1.html -ti "Initialization"Target: RebootNUT(manual ) does not support the functionality  -> Not yet supported========== TEST 2 ==========./PingToHost.seq -pkt ./PingToHost.def -log 2.html -ti "Source andDestination Address (ping)"Start Capturing Packets (Link0)Send Echo Request (Link-Local Address)Recv Echo Reply (Link-Local Address)OK  -> PASS========== TEST 3 ==========./PingOverRouter.seq -pkt ./PingOverRouter.def -log 3.html -ti "Sourceand Destination Address (ping over Router)"This test is for the router only  -> Router Only========== TEST 4 ==========./IH_UnrecognizedNextHeader.seq -pkt ./IH_UnrecognizedNextHeader.def-log 4.html -ti "Unrecognized Next Header in IPv6 Header"Start Capturing Packets (Link0)Send Unrecognized Next Header in IPv6 HeaderRecv ICMP Error (Parameter Problem, unrecognized Next Header typeencountered)OK  -> PASS========== TEST 5 ==========./IH_NoNextHeader.seq -pkt ./IH_NoNextHeader.def -log 5.html -ti "NoNext Header in IPv6 Header"This test is for the router only  -> Router Only========== TEST 6 ==========./PL_OddToHost.seq -pkt ./PL_OddToHost.def -log 6.html -ti "PayloadLength is Od d value"Start Capturing Packets (Link0)Send Echo Request (Odd Payload Length)Recv Echo Reply (Odd Payload Length)OK  -> PASS========== TEST 7 ==========./PL_OddOverRouter.seq -pkt ./PL_OddOverRouter.def -log 7.html -ti"Payload Length is Odd value over Router"This test is for the router only  -> Router Only========== TEST 8 ==========Thanks & Regards,Venu ________________________________From: Christy L Norman [mailto:cnorman@us.ibm.com] Sent: Tuesday, April 29, 2008 4:02 PMTo: users@tahi.orgSubject: [users:00696] Re: Execution of "Router Only" test cases.Try deleting the line with 'router' in it and retyping it, with only onetab between the label and value. I noticed that you have a tab, severalspaces, then the value (router). I've had a problem with this when Ichanged from manual to automated. Some more information about what's happening would be useful if you'restill having problems. What does it say for the ones that didn't pass?There's always something like: TN did not receive NS for Host1 from NUT. NUT does not deal with Preference correctly. NG Or something else semi-useful in red. "Kolli Venu-XRCD64" <XRCD64@motorola.com> 04/29/2008 12:52 PM Please respond tousers@tahi.orgTo<users@tahi.org>, Christy L Norman/Rochester/IBM@IBMUS ccSubject[users:00694] Re: Execution of "Router Only" test cases.	Thanks for your response.   Yes , the other test cases run fine .   In the IPv6 Specification results i see all the tests as PASSED apartfrom - initialization test   - "router only" tests - "host only" tests   Thanks & Regards, ________________________________From: Christy L Norman [mailto:cnorman@us.ibm.com] Sent: Tuesday, April 29, 2008 1:16 PMTo: users@tahi.orgSubject: [users:00693] Re: Execution of "Router Only" test cases.What happens when you try this? Do you get an error? What are thecommands you're using and the error you get (if you get one)? Does itwork if you try to run another set of tests besides the "router only"ones?"Kolli Venu-XRCD64" <XRCD64@motorola.com> 04/29/2008 11:25 AM Please respond tousers@tahi.orgTo<users@tahi.org> ccSubject[users:00692] Execution of "Router Only" test cases.	Hi ,  Configured Linux system having FreeBSD with TAHI test suites.  Connected two ethernet interfaces from Linux Box to cisco router withIPv6 enabled on the interfaces.  All the IPv6 Specification tests run well which are present in "ct"directory. I am not able to run the "router only" test cases even though i configured nut.def as a router and itsinterfaces mac addresses.  Linux < --------- Eth 1 ------------> Cisco Router         <-----------Eth 2  ----------->  Please find the attached config files and let me know how to enable therouter only test cases.  Thanks for your help.  Thanks & Regards,Venu[attachment "tn.def" deleted by Christy L Norman/Rochester/IBM][attachment "nut.def" deleted by Christy L Norman/Rochester/IBM] 
	
697_2.html (attatchment)(tag is disabled)