Hi,
Thank you for your great work!
> 2008/05/27 Yukiyo Akisada
> M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
> - allow time for all devices
> to perform stateless address autoconfiguration and
> Duplicate Address Detection.
I've confirmed it works well on my test env.
BTW, I suppose that cleanup procedure in some tests is not good enough.
In v6LC.2.3.13 (A to E) and v6LC.2.3.14 (A to E), which are the tests for hosts only,
the cleanup procedure just sends RA w/o SLL from TR1 to all-nodes multicast addr. That's all.
According to ipv6ready logo test spec, they should follow Common Test Cleanup procedure
but looks different in the test suite.
Could you take a look?
Best Regards,
Toyo Abe <tabe@miracleinux.com>
Software Expert
Miracle Linux Corporation.
Yukiyo Akisada wrote:
> Hi, all.
>
> Major Version Up for Phase-1/Phase-2 Core Protocols has been accomplished
> on IPv6 Ready Logo Program.
>
> We, TAHI project also followed this update.
> Now, Self_Test_4-0-0 and v6eval-3.0.14 have been available on the web.
>
> When you use Self_Test_4-0-0,
> please make sure to use v6eval-3.0.14.
>
> Here is differences of Self_Test.
>
> Self_Test_4-0-0: Change Log from 4.0.0b2
> ========================================================================
> 2008/05/27 Yukiyo Akisada
> M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
> - allow time for all devices
> to perform stateless address autoconfiguration and
> Duplicate Address Detection.
>
>
> 2008/05/21 Yukiyo Akisada
> M addr.p2/INDEX_P1_HOST, INDEX_P1_SPECIAL, INDEX_P2_HOST
> A addr.p2/v6LC_3_2_4_J.{def,seq}
> - add new test (v6LC.3.2.4.J)
>
>
> 2008/05/12 Yukiyo Akisada
> M nd.p2/v6LC_2_3_4_[E-H].seq, redirect.pm (v6LC.2.3.4)
> M nd.p2/redirect.pm (v6LC.2.3.5, v6LC.2.3.6, v6LC.2.3.8, v6LC.2.3.9)
> - set TR2's NCE to REACHABLE before sending ICMPv6 Redirect
>
> M nd.p2/redirect.pm (v6LC.2.3.7)
> - set TR2 and TR3's NCE to REACHABLE before sending ICMPv6 Redirect
> ========================================================================
>
> There is no differences between v6eval-3.0.14 and v6eval-3.0.14b1.
>
> Thanks,
>
>