Index: [Article Count Order] [Thread]

Date: Wed, 4 Jun 2008 13:22:40 +0900
From: Yukiyo Akisada <akisada@tahi.org>
Subject: [users:00736] Re: Major Version Up: IPv6 Ready Logo Program Phase-1/Phase-2 Core Protocols
To: "Maria perez" <maria.perez@bil.konicaminolta.us>
Cc: users@tahi.org
Message-Id: <20080604132240.e8c6989d.akisada@tahi.org>
In-Reply-To: <00dc01c8c2a3$faa31a30$01000014@fc.bil.konicaminolta.us>
References: <20080530095616.101712c1.akisada@tahi.org>	<00dc01c8c2a3$faa31a30$01000014@fc.bil.konicaminolta.us>
X-Mail-Count: 00736

Hi, Maria and all.

Now, the sample test results of v4.0.1 are available on
<http://www.tahi.org/logo/phase2-core/>.

These results are for Phase-2.
I will prepare Phase-1 results next.

Thanks,


On Fri, 30 May 2008 15:24:52 -0700
"Maria perez" <maria.perez@bil.konicaminolta.us> wrote:

> Hi,
> 
> I was wondering if an updated Test Report (of the Self_Test) with the last
> major version revision changes could be uploaded it would be very helpful
> thanks.
> 
> Regards,
> Maria
> 
> -----Original Message-----
> From: Yukiyo Akisada [mailto:akisada@tahi.org] 
> Sent: Thursday, May 29, 2008 5:56 PM
> To: users@tahi.org
> Subject: [users:00729] Major Version Up: IPv6 Ready Logo Program
> Phase-1/Phase-2 Core Protocols
> 
> Hi, all.
> 
> Major Version Up for Phase-1/Phase-2 Core Protocols has been accomplished
> on IPv6 Ready Logo Program.
> 
> We, TAHI project also followed this update.
> Now, Self_Test_4-0-0 and v6eval-3.0.14 have been available on the web.
> 
> When you use Self_Test_4-0-0,
> please make sure to use v6eval-3.0.14.
> 
> Here is differences of Self_Test.
> 
>     Self_Test_4-0-0: Change Log from 4.0.0b2
>     ========================================================================
>     2008/05/27      Yukiyo Akisada
>         M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
>             - allow time for all devices
>               to perform stateless address autoconfiguration and
>               Duplicate Address Detection.
>  
>  
>     2008/05/21      Yukiyo Akisada
>         M addr.p2/INDEX_P1_HOST, INDEX_P1_SPECIAL, INDEX_P2_HOST
>         A addr.p2/v6LC_3_2_4_J.{def,seq}
>             - add new test (v6LC.3.2.4.J)
>  
>  
>     2008/05/12      Yukiyo Akisada
>         M nd.p2/v6LC_2_3_4_[E-H].seq, redirect.pm (v6LC.2.3.4)
>         M nd.p2/redirect.pm (v6LC.2.3.5, v6LC.2.3.6, v6LC.2.3.8, v6LC.2.3.9)
>             - set TR2's NCE to REACHABLE before sending ICMPv6 Redirect
>  
>         M nd.p2/redirect.pm (v6LC.2.3.7)
>             - set TR2 and TR3's NCE to REACHABLE before sending ICMPv6
> Redirect
>     ========================================================================
> 
> There is no differences between v6eval-3.0.14 and v6eval-3.0.14b1.
> 
> Thanks,
> 
> 
> -- 
> Yukiyo Akisada <akisada@tahi.org>
> 
> 
> 
> 
> 


-- 
Yukiyo Akisada <akisada@tahi.org>