Date: Wed, 4 Jun 2008 20:03:40 +0530
From: "Arul Murugan" <umarul@gmail.com>
Subject: [users:00739] Re: Major Version Up: IPv6 Ready Logo Program Phase-1/Phase-2 Core Protocols
To: users@tahi.org
Message-Id: <335b9b110806040733y6bb0e77fnab75a519b6f65d47@mail.gmail.com>
In-Reply-To: <20080604132240.e8c6989d.akisada@tahi.org>
References: <20080530095616.101712c1.akisada@tahi.org>	 <00dc01c8c2a3$faa31a30$01000014@fc.bil.konicaminolta.us>	 <20080604132240.e8c6989d.akisada@tahi.org>
X-Mail-Count: 00739

Hi,
   Sample test result shows test v6LC.1.2.11(41 Part B: Unrecognized Routing
Type 0) failed.
Is this is execpted or problem with FreeBSD6.1?


Regards,
Arul

On 6/4/08, Yukiyo Akisada <akisada@tahi.org> wrote:
>
> Hi, Maria and all.
>
> Now, the sample test results of v4.0.1 are available on
> <http://www.tahi.org/logo/phase2-core/>.
>
> These results are for Phase-2.
> I will prepare Phase-1 results next.
>
>
> Thanks,
>
>
> On Fri, 30 May 2008 15:24:52 -0700
> "Maria perez" <maria.perez@bil.konicaminolta.us> wrote:
>
>
> > Hi,
> >
> > I was wondering if an updated Test Report (of the Self_Test) with the
> last
> > major version revision changes could be uploaded it would be very helpful
> > thanks.
> >
> > Regards,
> > Maria
> >
> > -----Original Message-----
> > From: Yukiyo Akisada [mailto:akisada@tahi.org]
> > Sent: Thursday, May 29, 2008 5:56 PM
> > To: users@tahi.org
> > Subject: [users:00729] Major Version Up: IPv6 Ready Logo Program
> > Phase-1/Phase-2 Core Protocols
> >
> > Hi, all.
> >
> > Major Version Up for Phase-1/Phase-2 Core Protocols has been accomplished
> > on IPv6 Ready Logo Program.
> >
> > We, TAHI project also followed this update.
> > Now, Self_Test_4-0-0 and v6eval-3.0.14 have been available on the web.
> >
> > When you use Self_Test_4-0-0,
> > please make sure to use v6eval-3.0.14.
> >
> > Here is differences of Self_Test.
> >
> >     Self_Test_4-0-0: Change Log from 4.0.0b2
> >
> ========================================================================
> >     2008/05/27      Yukiyo Akisada
> >         M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
> >             - allow time for all devices
> >               to perform stateless address autoconfiguration and
> >               Duplicate Address Detection.
> >
> >
> >     2008/05/21      Yukiyo Akisada
> >         M addr.p2/INDEX_P1_HOST, INDEX_P1_SPECIAL, INDEX_P2_HOST
> >         A addr.p2/v6LC_3_2_4_J.{def,seq}
> >             - add new test (v6LC.3.2.4.J)
> >
> >
> >     2008/05/12      Yukiyo Akisada
> >         M nd.p2/v6LC_2_3_4_[E-H].seq, redirect.pm (v6LC.2.3.4)
> >         M nd.p2/redirect.pm (v6LC.2.3.5, v6LC.2.3.6, v6LC.2.3.8,
> v6LC.2.3.9)
> >             - set TR2's NCE to REACHABLE before sending ICMPv6 Redirect
> >
> >         M nd.p2/redirect.pm (v6LC.2.3.7)
> >             - set TR2 and TR3's NCE to REACHABLE before sending ICMPv6
> > Redirect
> >
> ========================================================================
> >
> > There is no differences between v6eval-3.0.14 and v6eval-3.0.14b1.
> >
> > Thanks,
> >
> >
> > --
> > Yukiyo Akisada <akisada@tahi.org>
> >
> >
> >
> >
> >
>
>
> --
> Yukiyo Akisada <akisada@tahi.org>
>
>

	
739_2.html (attatchment)(tag is disabled)