Date: Wed, 4 Jun 2008 14:10:51 -0600 From: "Leino, Tammy" <tammy_leino@mentor.com> Subject: [users:00742] MIPv6 Conformance Test Suite CN-1-1 To: <users@tahi.org> Message-Id: <2F83EB16CD718C43889CBCD31ECFD7F8753E3D@na2-mail.mgc.mentorg.com> In-Reply-To: <2F83EB16CD718C43889CBCD31ECFD7F8753E37@na2-mail.mgc.mentorg.com> X-Mail-Count: 00742Hello, I am executing the correspondent node test #1; CN-1-1. I have IPsec =disabled. My tn.def, nut.def and config.txt files are configured =properly. When TN sends the echo request with a Home Address option =(action #3 in the test procedure), my NUT responds with a BE message =matching the three criteria outlined in the JUDGEMENT for *2 of the =test: (*2) MN receives Binding Error. - The Destination Address is set to the Source Address of ICMP Echo =Request (MN care-of address). - The Status field is set to 1. - The Home Address field is set to the value in the Home Address =option in the ICMP Echo Request (MN home address). However, TAHI reports the following error and aborts the test: CNT_SendAndRecv Status =UnKnownUnKnown Pkt=>HASH(0x82b75c8)BE - Receive Unexpented Packet-> FAIL I cannot tell what is wrong with my BE message. I viewed it in =Wireshark, and it is formed properly. Wireshark is able to parse it and =recognizes it as a BE, and I verified that all the requirements of =JUDGEMENT *2 are met. Can anyone shed light on this error? Perhaps a checksum error? This =same error occurs for all tests that require a BE to be transmitted to =the TN. Thank you for any assistance you can lend. Best Regards,Tammy Leino742_2.html (attatchment)(tag is disabled)