Hi, Abe-san,
could you wait for me?
Unfortunatelly,
I have other task on this week.
I will reply you at next week.
I need time to investigate about this.
Thanks
On Thu, 05 Jun 2008 14:51:30 +0900
Toyo Abe <tabe@miraclelinux.com> wrote:
> Hello,
>
> > BTW, I suppose that cleanup procedure in some tests is not good enough.
> > In v6LC.2.3.13 (A to E) and v6LC.2.3.14 (A to E), which are the tests
> > for hosts only, the cleanup procedure just sends RA w/o SLL from TR1 to
> > all-nodes multicast addr. That's all.
> > According to ipv6ready logo test spec, they should follow Common Test
> > Cleanup procedure
> > but looks different in the test suite.
>
> Can I get a comment on this? Is my understanding incorrect?
>
> Regards,
> -toyo
>
> Toyo Abe wrote:
> >
> > Hi,
> >
> > Thank you for your great work!
> >
> >> 2008/05/27 Yukiyo Akisada
> >> M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
> >> - allow time for all devices
> >> to perform stateless address autoconfiguration and
> >> Duplicate Address Detection.
> > I've confirmed it works well on my test env.
> >
> > BTW, I suppose that cleanup procedure in some tests is not good enough.
> > In v6LC.2.3.13 (A to E) and v6LC.2.3.14 (A to E), which are the tests
> > for hosts only, the cleanup procedure just sends RA w/o SLL from TR1 to
> > all-nodes multicast addr. That's all.
> > According to ipv6ready logo test spec, they should follow Common Test
> > Cleanup procedure
> > but looks different in the test suite.
> >
> > Could you take a look?
> >
> > Best Regards,
> > Toyo Abe <tabe@miracleinux.com>
> > Software Expert
> > Miracle Linux Corporation.
> > Yukiyo Akisada wrote:
> >> Hi, all.
> >>
> >> Major Version Up for Phase-1/Phase-2 Core Protocols has been accomplished
> >> on IPv6 Ready Logo Program.
> >>
> >> We, TAHI project also followed this update.
> >> Now, Self_Test_4-0-0 and v6eval-3.0.14 have been available on the web.
> >>
> >> When you use Self_Test_4-0-0,
> >> please make sure to use v6eval-3.0.14.
> >>
> >> Here is differences of Self_Test.
> >>
> >> Self_Test_4-0-0: Change Log from 4.0.0b2
> >>
> >> ========================================================================
> >> 2008/05/27 Yukiyo Akisada
> >> M addr.p2/v6LC_3_2_1_[A-C].seq, v6LC_3_2_4_J.seq
> >> - allow time for all devices
> >> to perform stateless address autoconfiguration and
> >> Duplicate Address Detection.
> >>
> >>
> >> 2008/05/21 Yukiyo Akisada
> >> M addr.p2/INDEX_P1_HOST, INDEX_P1_SPECIAL, INDEX_P2_HOST
> >> A addr.p2/v6LC_3_2_4_J.{def,seq}
> >> - add new test (v6LC.3.2.4.J)
> >>
> >>
> >> 2008/05/12 Yukiyo Akisada
> >> M nd.p2/v6LC_2_3_4_[E-H].seq, redirect.pm (v6LC.2.3.4)
> >> M nd.p2/redirect.pm (v6LC.2.3.5, v6LC.2.3.6, v6LC.2.3.8,
> >> v6LC.2.3.9)
> >> - set TR2's NCE to REACHABLE before sending ICMPv6 Redirect
> >>
> >> M nd.p2/redirect.pm (v6LC.2.3.7)
> >> - set TR2 and TR3's NCE to REACHABLE before sending ICMPv6
> >> Redirect
> >>
> >> ========================================================================
> >>
> >> There is no differences between v6eval-3.0.14 and v6eval-3.0.14b1.
> >>
> >> Thanks,
> >>
> >>
> >
> >
>
>
>
--
Yukiyo Akisada <akisada@tahi.org>