<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hell,all:<br>
I get the failure on 5.1.2, the following is log info.<br>
do you think it is ipsecSetSAD.rmt bug.<br>
thanks<br>
Best regards<br>
Wang<br>
<br>
<table border="1">
<tbody>
<tr valign="top">
<td>16:21:36</td>
<td>Start Capturing Packets (Link0)<br>
</td>
</tr>
<tr>
<td><br>
</td>
<td>Target: Set SAD entries:
src="3ffe:501:ffff:0001:0000:0000:0000:0001"
dst="3ffe:501:ffff:0:21d:fff:fe0f:be4e" spi=0x1000 mode=transport
protocol=esp ealgo=3des-cbc ealgokey=ipv6readylogo3descbcin01
eauth=hmac-sha1 eauthkey=ipv6readylogsha1in01 unique=10000</td>
</tr>
<tr valign="top">
<td>16:21:36</td>
<td>
vRemote(ipsecSetSAD.rmt)
``/usr/local/v6eval//bin/rhel51//ipsecSetSAD.rmt -t rhel51 -u root -p
redhat -d cuad0 -o 1 src="3ffe:501:ffff:0001:0000:0000:0000:0001"
dst="3ffe:501:ffff:0:21d:fff:fe0f:be4e" spi=0x1000 mode=transport
protocol=esp ealgo=3des-cbc ealgokey=ipv6readylogo3descbcin01
eauth=hmac-sha1 eauthkey=ipv6readylogsha1in01 unique=10000 ''
<pre>Connected
prompt_user: ``login: '', prompt_password: ``Password: '', prompt_command: ``(\$|#) ''
rLogin: Wait for login prompt (0.2 sec)...
rLogin: Never got prompt; try again
rLogin: Wait for login prompt (50 sec)...
[root@ipv6test2 ~]# rLogin: Got command prompt
rLogin: Got command prompt
_rCommand: Try to get command prompt (0.2 sec.)
_rCommand: (\$|#)
_rCommand: command prompt...
_rCommand: Try to get command prompt (30 sec.)
_rCommand: (\$|#)
[root@ipv6test2 ~]# _rCommand: Do ``/bin/echo 'add 3ffe:501:ffff:0001:0000:0000:0000:0001 3ffe:501:ffff:0:21d:fff:fe0f:be4e esp 0x1000 -m transport -u 10000 -E 3des-cbc "ipv6readylogo3descbcin01" -A hmac-sha1 "ipv6readylogsha1in01"; dump;' | setkey -c'' command
/bin/echo 'add 3ffe:501:ffff:0001:0000:0000:0000:0001 3ffe:5 01:ffff:0:21d:fff:fe0f:be4e esp 0x1000 -m transport -u 10000 -E 3des-cbc "ipv6re adylogo3descbcin01" -A hmac-sha1 "ipv6readylogsha1in01"; dump;' | setkey -c
3ffe:501:ffff:1::1 3ffe:501:ffff:0:21d:fff:fe0f:be4e
esp mode=transport spi=4096(0x00001000) reqid=10000(0x00002710)
E: 3des-cbc 69707636 72656164 796c6f67 6f336465 73636263 696e3031
A: hmac-sha1 69707636 72656164 796c6f67 73686131 696e3031
seq=0x00000000 replay=0 flags=0x00000000 state=mature
created: Oct 29 00:19:15 2008 current: Oct 29 00:19:15 2008
diff: 0(s) hard: 0(s) soft: 0(s)
last: hard: 0(s) soft: 0(s)
current: 0(bytes) hard: 0(bytes) soft: 0(bytes)
allocated: 0 hard: 0 soft: 0
sadb_seq=0 pid=3440 refcnt=0
[root@ipv6test2 ~]# sendMessagesSync: never got /bin/echo 'add 3ffe:501:ffff:0001:0000:0000:0000:0001 3ffe:501:ffff:0:21d:fff:fe0f:be4e esp 0x1000 -m transport -u 10000 -E 3des-cbc "ipv6readylogo3descbcin01" -A hmac-sha1 "ipv6readylogsha1in01"; dump;' | setkey -c
rCommand: Try to get command prompt (0.2 sec)
rCommand: CmdOutput=``/bin/echo 'add 3ffe:501:ffff:0001:0000:0000:0000:0001 3ffe:5 01:ffff:0:21d:fff:fe0f:be4e esp 0x1000 -m transport -u 10000 -E 3des-cbc "ipv6re adylogo3descbcin01" -A hmac-sha1 "ipv6readylogsha1in01"; dump;' | setkey -c
3ffe:501:ffff:1::1 3ffe:501:ffff:0:21d:fff:fe0f:be4e
esp mode=transport spi=4096(0x00001000) reqid=10000(0x00002710)
E: 3des-cbc 69707636 72656164 796c6f67 6f336465 73636263 696e3031
A: hmac-sha1 69707636 72656164 796c6f67 73686131 696e3031
seq=0x00000000 replay=0 flags=0x00000000 state=mature
created: Oct 29 00:19:15 2008 current: Oct 29 00:19:15 2008
diff: 0(s) hard: 0(s) soft: 0(s)
last: hard: 0(s) soft: 0(s)
current: 0(bytes) hard: 0(bytes) soft: 0(bytes)
allocated: 0 hard: 0 soft: 0
sadb_seq=0 pid=3440 refcnt=0
[root@ipv6test2 ~]''
echo $?
0
[root@ipv6terCommand: exit status: 0
~
[EOT]
</pre>
</td>
</tr>
<tr>
<td><br>
</td>
<td>Target: Set SPD entries:
src="3ffe:501:ffff:0001:0000:0000:0000:0001"
dst="3ffe:501:ffff:0:21d:fff:fe0f:be4e" upperspec=icmp6 icmp6_type=128
icmp6_code=0 direction=in protocol=esp-auth mode=transport level=unique
unique=10000</td>
</tr>
<tr valign="top">
<td>16:21:41</td>
<td>
vRemote(ipsecSetSPD.rmt)
``/usr/local/v6eval//bin/rhel51//ipsecSetSPD.rmt -t rhel51 -u root -p
redhat -d cuad0 -o 1 src="3ffe:501:ffff:0001:0000:0000:0000:0001"
dst="3ffe:501:ffff:0:21d:fff:fe0f:be4e" upperspec=icmp6 icmp6_type=128
icmp6_code=0 direction=in protocol=esp-auth mode=transport level=unique
unique=10000 ''
<pre>Connected
upperspec must be one of any|tcp|udp
ipsecSetSPD.rmt [parameters]
parameters:
src=source address
dst=destination address
sport=source port (default:any)
dport=destination port (default:any)
upperspec={any|tcp|udp} (default:any)
direction={in|out}
protocol={ah|esp|ah-esp}
mode={transport|tunnel}
policy={ipsec|none|discard} (default:ipsec)
tsrc=tunnel entry address
tdst=tunnel exit address
unique=unique ID for MIPv6 configuration
~
[EOT]
</pre>
</td>
</tr>
<tr>
<td><br>
</td>
<td>Cannot Set SPD entries:
src="3ffe:501:ffff:0001:0000:0000:0000:0001"
dst="3ffe:501:ffff:0:21d:fff:fe0f:be4e" upperspec=icmp6 icmp6_type=128
icmp6_code=0 direction=in protocol=esp-auth mode=transport level=unique
unique=10000 <br>
<font color="#ff0000">NG</font><br>
</td>
</tr>
<tr>
<td>16:21:41</td>
<td>End</td>
</tr>
</tbody>
</table>
</body>
</html>