Date: Thu, 11 Dec 2008 04:20:08 +0000 From: "Ghorpade, Sanjeev K (IPG HSSL)" <sanjeev.ghorpade@hp.com> Subject: [users:01029] Re: Help regarding Serial communication in TAHI Project To: "users@tahi.org" <users@tahi.org> Cc: Shashank Sharma <mail2shashank@gmail.com> Message-Id: <0AD8623EA60A184CA4001BCF40ABD84F3AC8ADAFF7@GVW1161EXB.americas.hpqcorp.net> In-Reply-To: <6f6ef9170812101958y62c1edc1x86ea49d263d8de70@mail.gmail.com> References: <6f6ef9170812101958y62c1edc1x86ea49d263d8de70@mail.gmail.com> X-Mail-Count: 01029Hi Jaskiran,Yes, There are Trigger points for manual testing of Test Specification: 4.0=.2A message is displayed on FreeBSD Console to reboot the NUT.-Sanjeev________________________________From: JASKIRAN DHINGRA [mailto:dhingra.jaskiran@gmail.com]Sent: Thursday, December 11, 2008 9:29 AMTo: users@tahi.orgCc: Shashank SharmaSubject: [users:01028] Help regarding Serial communication in TAHI ProjectHi All,As per the usage of serial communication specified,is it fine if we do conf=iguration manually on target.Are we given proper trigger points to do such configuration manuallyor is it recommended to use serial communication?regardsJaskiran Dhingra---------- Forwarded message ----------From: Channa <channa.kad@gmail.com<mailto:channa.kad@gmail.com>>Date: Wed, Dec 10, 2008 at 11:27 AMSubject: [users:01022] Re: Help regarding IPv6 Conformance Test setup using= TAHITo: users@tahi.org<mailto:users@tahi.org>Hi,Serial communication is must as TAHI scripts execute commands ontarget like reboot,dhcp start.If the serial communication is not present these commands needs to beexecuted manually on the target.Regards,Channa2008/12/10 Shashank Sharma <mail2shashank@gmail.com<mailto:mail2shashank@gm=ail.com>>:> Hi All,>> I'm new to the TAHI project and require it for IPv6 conformance test.>> Following are specifications of the resources used:> OS : FreeBSD 6.3-RELEASE for Tester interface and Fedora 8 for the Networ=k> Under Test.> IPv6 Conformance Test Tool : v6eval3.1.1> IPv6 Conformance Test Suite : Test Specification: 4.0.2>> In the v6eval specification it is mentioned the use of serial communicati=on> between the Target and Tester.> I'm not clear with this serial communication requirement in Ipv6 testing.= Is> there a way that we can avoid this or> its mandatory. Kindly, tell me the usage of serial communication in test> setup.>> Thanks & Regards,>> Shashank Sharma> Engineer> Hughes Systique Corporation> D - 8, Infocity II, Sector 33,> Gurgaon, Haryana - 122022> Tel: +91-124-3045400 (ext: 2418)> +91 9899912081> Email: shashank.sharma@hsc.com<mailto:shashank.sharma@hsc.com>> www.hsc.com<http://www.hsc.com/>>1029_2.html (attatchment)(tag is disabled)