Index: [Article Count Order] [Thread]

Date: Thu, 11 Dec 2008 10:09:48 +0530
From: Santosh Bhavsar <santosh.bhavsar@sarkinfotech.com>
Subject: [users:01030] Re: Help regarding Serial communication in TAHI Project
To: users@tahi.org
Message-Id: <49409994.2030400@sarkinfotech.com>
In-Reply-To: <6f6ef9170812101958y62c1edc1x86ea49d263d8de70@mail.gmail.com>
References: <6f6ef9170812101958y62c1edc1x86ea49d263d8de70@mail.gmail.com>
X-Mail-Count: 01030

Hi!
there is no as such recommendation for using serial communication.
the only advantage is you don't have to reboot your test device manually 
every time.
-  Santosh
(Sark Infotech Pvt. Ltd.)

JASKIRAN DHINGRA wrote:
> Hi All,
>  
> As per the usage of serial communication specified,is it fine if we do 
> configuration manually on target.
> Are we given proper trigger points to do such configuration manually
> or is it recommended to use serial communication?
>  
>  
> regards
> Jaskiran Dhingra
>  
>
>
>  
> ---------- Forwarded message ----------
> From: *Channa* <channa.kad@gmail.com <mailto:channa.kad@gmail.com>>
> Date: Wed, Dec 10, 2008 at 11:27 AM
> Subject: [users:01022] Re: Help regarding IPv6 Conformance Test setup 
> using TAHI
> To: users@tahi.org <mailto:users@tahi.org>
>
>
> Hi,
> Serial communication is must as TAHI scripts execute commands on
> target like reboot,dhcp start.
> If the serial communication is not present these commands needs to be
> executed manually on the target.
>
> Regards,
> Channa
>
> 2008/12/10 Shashank Sharma <mail2shashank@gmail.com 
> <mailto:mail2shashank@gmail.com>>:
> > Hi All,
> >
> > I'm new to the TAHI project and require it  for IPv6 conformance test.
> >
> > Following are specifications of the resources used:
> > OS : FreeBSD 6.3-RELEASE for Tester interface and Fedora 8 for the 
> Network
> > Under Test.
> > IPv6 Conformance Test Tool  : v6eval3.1.1
> > IPv6 Conformance Test Suite : Test Specification: 4.0.2
> >
> > In the v6eval specification it is mentioned the use of serial 
> communication
> > between the Target and Tester.
> > I'm not clear with this serial communication requirement in Ipv6 
> testing. Is
> > there a way that we can avoid this or
> > its mandatory. Kindly, tell me the usage of serial communication in test
> > setup.
> >
> > Thanks & Regards,
> >
> > Shashank Sharma
> > Engineer
> > Hughes Systique Corporation
> > D - 8, Infocity II, Sector 33,
> > Gurgaon, Haryana - 122022
> > Tel: +91-124-3045400 (ext: 2418)
> >       +91 9899912081
> > Email: shashank.sharma@hsc.com <mailto:shashank.sharma@hsc.com>
> > www.hsc.com <http://www.hsc.com/>
> >
>
>