Hi,
You have to install ike-mipv6.
Please visit the following.
http://cert.v6pc.jp/mipv6/phase2/
[I] TAHI Platform
This ike module is always necessary, even if you don't use IKE.
Please visit TAHI Project and download latest version (3.0.10 or higher) of v6eval.
ike-mipv6 (version 1.0.4) (updated at 2006/6/19)
Best Regards
--
Kiyoaki Kawaguchi
"Vit Pelcak <vpelcak@suse.cz>" wrote:
> Hi all.
>
> I have encountered internal error when testing mipv6 ha and mn. In
> mipv6-cn I achieved 100% pass rate.
>
> make clean test
> ===> mipv6-mn (clean)
> rm -f index.html report.html summary.html [0-9]*.html analysis.html
> *.dump *.log mip6_mn_config.def mip6_mn_nut_addr.def
> mip6_mn_cn0_addr.def mip6_mn_r2_addr.def mip6_mn_sa.def ike.def
> ikesub.def *.ini *.tmp
> ===> mipv6-mn
> echo "0" > logo.ini
> ./mip6_mn_config.pl
> Use of uninitialized value in numeric eq (==) at
> /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2598.
> HoA address : 3ffe:501:ffff:100:2a0:d2ff:fe2f:6c2e
> Care-of address: 3ffe:501:ffff:102:2a0:d2ff:fe2f:6c2e
> ha0 address : 3ffe:501:ffff:100:200:ff:fe00:a0a0
> cn0 address : 3ffe:501:ffff:104:200:ff:fe00:a8a8
> Use of uninitialized value in concatenation (.) or string at
> /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2695.
> /usr/local/v6eval/bin/autorun -F -tiny -title="Conformance Test for
> Mobile Node" ./INDEX
> ========== TEST 1 ==========
> ./MN-0-0-0-1-001.seq -pkt ./mip6_mn_common.def -log 1.html -ti
> "MN-0-0-0-1-001 - Mobile Node Operation-1"
> V6evalTool.pm cc -E -x c-header -I./ -I./ -I/usr/local/v6eval//include/
> -include /usr/local/v6eval//include//std.def ./mip6_mn_common.def >
> /var/tmp/tmp.0.X8Wn3K failed status:1
> Died at /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2578.
>
> BEGIN failed--compilation aborted at
> /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2775.
> Compilation failed in require at ./MN-0-0-0-1-001.seq line 54.
>
> BEGIN failed--compilation aborted at ./MN-0-0-0-1-001.seq line 54.
> -> internal error
>
> make clean test
> ===> mipv6-ha (clean)
> rm -f INDEX INDEX_PHASE2
> INDEX_PHASE2_FINE_GRAIN index.html
> report.html summary.html
> [0-9]*.html *.dump
> *.log *.tmp
> *.bak ipsec_sa.pl
> config.pmconfig.def
> sequence.def ikesub.def
> pod2htmd* pod2htmi*
> *.rtadvd.conf local_haad_reply.def
> local_ra_deregistration.def local_ra_registration.def
> ===> mipv6-ha
> /usr/local/v6eval/bin/autorun -F -tiny -title="Conformance Test for
> Home Agent" ./INDEX
> ========== TEST 1 ==========
> ./HA_0_0_0.seq -pkt ./HA_0_0_0.def -log 1.html -ti "HA_0_0_0 -
> Initialization and general configuration"
> V6evalTool.pm cc -E -x c-header -I./ -I./ -I/usr/local/v6eval//include/
> -include /usr/local/v6eval//include//std.def ./HA_0_0_0.def >
> /var/tmp/tmp.0.mkVZgr failed status:1
> Died at /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2578.
>
> BEGIN failed--compilation aborted at
> /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2775.
> Compilation failed in require at mipv6.pm line 51.
>
> BEGIN failed--compilation aborted at mipv6.pm line 51.
> Compilation failed in require at ./HA_0_0_0.seq line 52.
>
> BEGIN failed--compilation aborted at ./HA_0_0_0.seq line 52.
> -> internal error
>
> I didn't touch file V6evalTool.pm and mipv6 tests were installed simply
> by make && make install.
>
> What is wrong? Did I forget something or there is problem elsewhere.
>
> Thanks.
>
> Vit Pelcak
>
>
>
>