K.Kawaguchi napsal(a):
> Hi,
>
> mipv6-cn
> Almost good.
> You should note some warinig in result, if you will get the IPv6 Ready Logo.
> IPv6 Ready Logo requests 100% pass except skips.
>
I'll have a look at it. I know that these warnings should be dealt with,
but I don't know how.
> mipv6-ha
> You should configure the file /usr/local/v6eval/etc/nut.def.
> ---
> # Type
> # host, router, special
> Type router <<< change
> ---
>
I had plans to test only host mode. But I gave it a try and ended with
internal error.
===> mipv6-ha
(clean)
rm -f INDEX INDEX_PHASE2
INDEX_PHASE2_FINE_GRAIN index.html
report.html summary.html
[0-9]*.html *.dump
*.log *.tmp
*.bak ipsec_sa.pl
config.pm config.def
sequence.def ikesub.def
pod2htmd* pod2htmi*
*.rtadvd.conf local_haad_reply.def
local_ra_deregistration.def
local_ra_registration.def
===>
mipv6-ha
/usr/local/v6eval/bin/autorun -F -tiny -title="Conformance Test for
Home Agent"
./INDEX
========== TEST 1
==========
./HA_0_0_0.seq -pkt ./HA_0_0_0.def -log 1.html -ti "HA_0_0_0 -
Initialization and general
configuration"
CONFIGURATION
.
.
.
INITIALIZATION
Start Capturing Packets (Link0)
calculate RUT and MN addresses
Clear Captured Packets (Link0)
"/usr/local/v6eval//include/ike.def", line 74: error: IKE_EH_NUTtoTN
duplicated declaration near 'Hdr_Ether IKE_EH_NUTtoTN { '
"/usr/local/v6eval//include/ike.def", line 77: error: IKE_RECV
duplicated declaration near 'Frame_Ether IKE_RECV { '
"/usr/local/v6eval//include/ike.def", line 77: error:
_PACKET_IPV6_IKE_RECV duplicated declaration near 'Frame_Ether IKE_RECV
{ header=IKE_EH_NUTtoTN; packet=_PACKET_IPV6_IKE_RECV; } Packet_IPv6
_PACKET_IPV6_IKE_RECV {h'
"/usr/local/v6eval//include/ike.def", line 77: error: _HDR_IPV6_IKE_RECV
duplicated declaration near 'Frame_Ether IKE_RECV {
header=IKE_EH_NUTtoTN; packet=_PACKET_IPV6_IKE_RECV; } Packet_IPv6
_PACKET_IPV6_IKE_RECV
{header=_HDR_IPV6_IKE_RECV;upper=_UPP_UDP_IKE_RECV;} Hdr_IPv6
_HDR_IPV6_IKE_RECV { '
"/usr/local/v6eval//include/ike.def", line 77: error: _UPP_UDP_IKE_RECV
duplicated declaration near 'Frame_Ether IKE_RECV {
header=IKE_EH_NUTtoTN; packet=_PACKET_IPV6_IKE_RECV; } Packet_IPv6
_PACKET_IPV6_IKE_RECV
{header=_HDR_IPV6_IKE_RECV;upper=_UPP_UDP_IKE_RECV;} Hdr_IPv6
_HDR_IPV6_IKE_RECV { Version = auto; TrafficClass = auto; FlowLabel =
auto; PayloadLength = auto; NextHeader = auto; HopLimit = any;
SourceAddress = any; DestinationAddress = any; } Upp_UDP
_UPP_UDP_IKE_RECV { '
"/usr/local/v6eval//include/ike.def", line 77: error: _HDR_UDP_IKE_RECV
duplicated declaration near 'Frame_Ether IKE_RECV {
header=IKE_EH_NUTtoTN; packet=_PACKET_IPV6_IKE_RECV; } Packet_IPv6
_PACKET_IPV6_IKE_RECV
{header=_HDR_IPV6_IKE_RECV;upper=_UPP_UDP_IKE_RECV;} Hdr_IPv6
_HDR_IPV6_IKE_RECV { Version = auto; TrafficClass = auto; FlowLabel =
auto; PayloadLength = auto; NextHeader = auto; HopLimit = any;
SourceAddress = any; DestinationAddress = any; } Upp_UDP
_UPP_UDP_IKE_RECV { header = _HDR_UDP_IKE_RECV; payload =
IKE_RECV_ISAKMP; } Hdr_UDP _HDR_UDP_IKE_RECV { '
"/usr/local/v6eval//include/ike.def", line 100: error: IKE_RECV_ISAKMP
duplicated declaration near 'Udp_ISAKMP IKE_RECV_ISAKMP {
"/usr/local/v6eval//include/ike.def", line 105: error:
IKE_RECV_ISAKMP_HDR duplicated declaration near 'Hdr_ISAKMP
IKE_RECV_ISAKMP_HDR {
V6evalTool.pm vSend() return status=1
Died at /usr/local/lib/perl5/site_perl/5.8.8/V6evalTool.pm line 2578.
-> internal error
I sent new mipv6-ha in attachment.
Doesn't it fail because all settings are set as false?
Also, mipv6-ha readme suggests to use host as Type in nut.def
> mipv6-mn
> I am sorry. A cause is still unknown. I still need information.
> Which version of FreeBSD are you using?
> Please send the derectory "/usr/local/v6eval/include".
>
OK. In attachment.
I use FreeBSD 7.0 as TN and openSUSE 11.1 as NUT.
Thank you for help.
Regards
Vit Pelcak
1108_2.bz2
1108_3.bz2