Hi, all.
The newest Self_Test (v4.0.5) has been available now.
You may know that
IPv6 Ready Logo Program <http://www.ipv6ready.org/> published
the newest test specification v4.0.4,
and Self_Test v4.0.5 already supports it.
The newest test specification is v4.0.4,
and the newest test tool is v4.0.5.
# Please don't confuse test specification version with test tool version. :-)
Differences from Self_Test v4.0.4 are following.
2009/03/16 Yukiyo Akisada
M spec.p2/v6LC_1_1_10_H.def (v6LC.1.1.10.H)
v6LC_1_1_10_I.def (v6LC.1.1.10.I)
v6LC_1_1_10_J.def (v6LC.1.1.10.J)
v6LC_1_1_10_K.def (v6LC.1.1.10.K)
- Changed multicast addresses according to the test specification
2009/03/04 Yukiyo Akisada
M addr.p2/LLA_DAD_NSPostDAD_SameDstSameTgt.seq (v6LC.3.1.2.B)
LLA_DAD_NAPostDAD_SameTgt.seq (v6LC.3.1.2.D)
LLA_DAD_NSPostDAD_Reserved.seq (v6LC.3.1.3.I)
LLA_DAD_NSPostDAD_wTLL.seq (v6LC.3.1.3.J)
LLA_DAD_NAPostDAD_Reserved.seq (v6LC.3.1.4.H)
LLA_DAD_NAPostDAD_wSLL.seq (v6LC.3.1.4.I)
LLA_SAA.def
- Added verification point to verify the NUT does not transmit
any RS after failing DAD for its link-local address.
M addr.p2/LLA_SAA.def (v6LC.3.1.5.B)
- Added Source Link-layer Address option to NS sent from the tester
M addr.p2/LLA_DAD_NSPostDAD_SameDstDiffTgt.seq (v6LC.3.1.2.A)
v6LC_3_1_2_B_p1.seq (v6LC.3.1.2.B)
LLA_DAD_NSPostDAD_SameDstSameTgt.seq (v6LC.3.1.2.B)
LLA_DAD_NAPostDAD_DiffTgt.seq (v6LC.3.1.2.C)
v6LC_3_1_2_D_p1.seq (v6LC.3.1.2.D)
LLA_DAD_NAPostDAD_SameTgt.seq (v6LC.3.1.2.D)
LLA_DAD_NSPostDAD_invalidLEN.seq (v6LC.3.1.3.A)
LLA_DAD_NSPostDAD_HL254.seq (v6LC.3.1.3.B)
LLA_DAD_NSPostDAD_DstTent.seq (v6LC.3.1.3.C)
LLA_DAD_NSPostDAD_DstAll.seq (v6LC.3.1.3.D)
LLA_DAD_NSPostDAD_CODEnon0.seq (v6LC.3.1.3.E)
LLA_DAD_NSPostDAD_invalidCHKSUM.seq (v6LC.3.1.3.F)
LLA_DAD_NSPostDAD_tgtMCAST.seq (v6LC.3.1.3.G)
LLA_DAD_NSPostDAD_wSLL.seq (v6LC.3.1.3.H)
v6LC_3_1_3_I_p1.seq (v6LC.3.1.3.I)
LLA_DAD_NSPostDAD_Reserved.seq (v6LC.3.1.3.I)
v6LC_3_1_3_J_p1.seq (v6LC.3.1.3.J)
LLA_DAD_NSPostDAD_wTLL.seq (v6LC.3.1.3.J)
LLA_DAD_NAPostDAD_invalidLEN.seq (v6LC.3.1.4.A)
LLA_DAD_NAPostDAD_HL254.seq (v6LC.3.1.4.B)
LLA_DAD_NAPostDAD_CODEnon0.seq (v6LC.3.1.4.C)
LLA_DAD_NAPostDAD_invalidCHKSUM.seq (v6LC.3.1.4.D)
LLA_DAD_NAPostDAD_SF1.seq (v6LC.3.1.4.E)
LLA_DAD_NAPostDAD_tgtMCAST.seq (v6LC.3.1.4.F)
LLA_DAD_NAPostDAD_invalidOptLen.seq (v6LC.3.1.4.G)
v6LC_3_1_4_H_p1.seq (v6LC.3.1.4.H)
LLA_DAD_NAPostDAD_Reserved.seq (v6LC.3.1.4.H)
v6LC_3_1_4_I_p1.seq (v6LC.3.1.4.I)
LLA_DAD_NAPostDAD_wSLL.seq (v6LC.3.1.4.I)
LLA_DAD_NSPostDAD_SrcUni.seq (v6LC.3.1.5.A)
LLA_DAD_NSPostDAD_SrcDstUni.seq (v6LC.3.1.5.B)
LLA_SAA.def
SAA.pm
- Added procedure sending unicast NS to confirm address assignment
2009/03/02 Yukiyo Akisada
M nd.p2/V6LC_2_2_1.def, rdisc.pm (v6LC.2.2.1)
- Added verification point to verify the HUT does not transmit an RS
from its link-local address before performing DAD.
Thanks,
--
Yukiyo Akisada <akisada@tahi.org>